MIPS support for libc.
Change-Id: I2864dea04b3faf2d919165dcaa600af5b16c41c8
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Raghu Gandham <raghu@mips.com>
diff --git a/libc/arch-mips/bionic/_setjmp.S b/libc/arch-mips/bionic/_setjmp.S
new file mode 100644
index 0000000..e7083ae
--- /dev/null
+++ b/libc/arch-mips/bionic/_setjmp.S
@@ -0,0 +1,188 @@
+/* $OpenBSD: _setjmp.S,v 1.4 2005/08/07 16:40:15 espie Exp $ */
+
+/*
+ * Copyright (c) 2002 Opsycon AB (www.opsycon.se / www.opsycon.com)
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Opsycon AB nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+
+#include <machine/asm.h>
+#include <machine/regnum.h>
+#include <machine/signal.h>
+
+/*
+ * _setjmp, _longjmp (not restoring signal state)
+ *
+ * XXX FPSET should probably be taken from SR setting. hmmm...
+ * GPOFF and FRAMESIZE must be the same for both _setjmp and _longjmp!
+ *
+ */
+
+FRAMESZ= MKFSIZ(0,4)
+GPOFF= FRAMESZ-2*REGSZ
+
+#define FPREG64_S(FPR, OFF, BASE) \
+ swc1 FPR, OFF(BASE) ; \
+ mfhc1 t0, FPR ; \
+ sw t0, OFF+4(BASE) ;
+
+#define FPREG64_L(FPR, OFF, BASE) \
+ lw t0, OFF+4(BASE) ; \
+ lw t1, OFF(BASE) ; \
+ mtc1 t1, FPR ; \
+ mthc1 t0, FPR ; \
+
+LEAF(_setjmp, FRAMESZ)
+ PTR_SUBU sp, FRAMESZ
+ SETUP_GP64(GPOFF, _setjmp)
+ SAVE_GP(GPOFF)
+ .set noreorder
+#if defined(__mips64)
+ dli v0, 0xACEDBADE # sigcontext magic number
+#else
+ li v0, 0xACEDBADE # sigcontext magic number
+#endif
+ REG_S v0, SC_REGS+ZERO*REGSZ(a0)
+ REG_S s0, SC_REGS+S0*REGSZ(a0)
+ REG_S s1, SC_REGS+S1*REGSZ(a0)
+ REG_S s2, SC_REGS+S2*REGSZ(a0)
+ REG_S s3, SC_REGS+S3*REGSZ(a0)
+ REG_S s4, SC_REGS+S4*REGSZ(a0)
+ REG_S s5, SC_REGS+S5*REGSZ(a0)
+ REG_S s6, SC_REGS+S6*REGSZ(a0)
+ REG_S s7, SC_REGS+S7*REGSZ(a0)
+ REG_S s8, SC_REGS+S8*REGSZ(a0)
+ REG_L v0, GPOFF(sp)
+ REG_S v0, SC_REGS+GP*REGSZ(a0)
+ PTR_ADDU v0, sp, FRAMESZ
+ REG_S v0, SC_REGS+SP*REGSZ(a0)
+ REG_S ra, SC_PC(a0)
+
+#if !defined(SOFTFLOAT)
+ li v0, 1 # be nice if we could tell
+ REG_S v0, SC_FPUSED(a0) # sc_fpused = 1
+ cfc1 v0, $31
+#if _MIPS_FPSET == 32
+ FPREG64_S($f20, SC_FPREGS+((F20-F0)*REGSZ_FP), a0)
+ FPREG64_S($f21, SC_FPREGS+((F21-F0)*REGSZ_FP), a0)
+ FPREG64_S($f22, SC_FPREGS+((F22-F0)*REGSZ_FP), a0)
+ FPREG64_S($f23, SC_FPREGS+((F23-F0)*REGSZ_FP), a0)
+ FPREG64_S($f24, SC_FPREGS+((F24-F0)*REGSZ_FP), a0)
+ FPREG64_S($f25, SC_FPREGS+((F25-F0)*REGSZ_FP), a0)
+ FPREG64_S($f26, SC_FPREGS+((F26-F0)*REGSZ_FP), a0)
+ FPREG64_S($f27, SC_FPREGS+((F27-F0)*REGSZ_FP), a0)
+ FPREG64_S($f28, SC_FPREGS+((F28-F0)*REGSZ_FP), a0)
+ FPREG64_S($f29, SC_FPREGS+((F29-F0)*REGSZ_FP), a0)
+ FPREG64_S($f30, SC_FPREGS+((F30-F0)*REGSZ_FP), a0)
+ FPREG64_S($f31, SC_FPREGS+((F31-F0)*REGSZ_FP), a0)
+#else
+ swc1 $f20, SC_FPREGS+((F20-F0)*REGSZ_FP)(a0)
+ swc1 $f21, SC_FPREGS+((F21-F0)*REGSZ_FP)(a0)
+ swc1 $f22, SC_FPREGS+((F22-F0)*REGSZ_FP)(a0)
+ swc1 $f23, SC_FPREGS+((F23-F0)*REGSZ_FP)(a0)
+ swc1 $f24, SC_FPREGS+((F24-F0)*REGSZ_FP)(a0)
+ swc1 $f25, SC_FPREGS+((F25-F0)*REGSZ_FP)(a0)
+ swc1 $f26, SC_FPREGS+((F26-F0)*REGSZ_FP)(a0)
+ swc1 $f27, SC_FPREGS+((F27-F0)*REGSZ_FP)(a0)
+ swc1 $f28, SC_FPREGS+((F28-F0)*REGSZ_FP)(a0)
+ swc1 $f29, SC_FPREGS+((F29-F0)*REGSZ_FP)(a0)
+ swc1 $f30, SC_FPREGS+((F30-F0)*REGSZ_FP)(a0)
+ swc1 $f31, SC_FPREGS+((F31-F0)*REGSZ_FP)(a0)
+#endif
+ REG_S v0, SC_FPREGS+((FSR-F0)*REGSZ)(a0)
+#endif /* !SOFTFLOAT */
+ RESTORE_GP64
+ PTR_ADDU sp, FRAMESZ
+ j ra
+ move v0, zero
+END(_setjmp)
+
+LEAF(_longjmp, FRAMESZ)
+ PTR_SUBU sp, FRAMESZ
+ SETUP_GP64(GPOFF, _longjmp)
+ SAVE_GP(GPOFF)
+ .set noreorder
+ REG_L v0, SC_REGS+ZERO*REGSZ(a0)
+ bne v0, 0xACEDBADE, botch # jump if error
+ REG_L ra, SC_PC(a0)
+ REG_L v0, SC_FPREGS+((FSR-F0)*REGSZ)(a0)
+ REG_L s0, SC_REGS+S0*REGSZ(a0)
+ REG_L s1, SC_REGS+S1*REGSZ(a0)
+ REG_L s2, SC_REGS+S2*REGSZ(a0)
+ REG_L s3, SC_REGS+S3*REGSZ(a0)
+ REG_L s4, SC_REGS+S4*REGSZ(a0)
+ REG_L s5, SC_REGS+S5*REGSZ(a0)
+ REG_L s6, SC_REGS+S6*REGSZ(a0)
+ REG_L s7, SC_REGS+S7*REGSZ(a0)
+ REG_L s8, SC_REGS+S8*REGSZ(a0)
+ REG_L gp, SC_REGS+GP*REGSZ(a0)
+ REG_L sp, SC_REGS+SP*REGSZ(a0)
+#if !defined(SOFTFLOAT)
+ ctc1 v0, $31
+#if _MIPS_FPSET == 32
+ FPREG64_L($f20, SC_FPREGS+((F20-F0)*REGSZ_FP), a0)
+ FPREG64_L($f21, SC_FPREGS+((F21-F0)*REGSZ_FP), a0)
+ FPREG64_L($f22, SC_FPREGS+((F22-F0)*REGSZ_FP), a0)
+ FPREG64_L($f23, SC_FPREGS+((F23-F0)*REGSZ_FP), a0)
+ FPREG64_L($f24, SC_FPREGS+((F24-F0)*REGSZ_FP), a0)
+ FPREG64_L($f25, SC_FPREGS+((F25-F0)*REGSZ_FP), a0)
+ FPREG64_L($f26, SC_FPREGS+((F26-F0)*REGSZ_FP), a0)
+ FPREG64_L($f27, SC_FPREGS+((F27-F0)*REGSZ_FP), a0)
+ FPREG64_L($f28, SC_FPREGS+((F28-F0)*REGSZ_FP), a0)
+ FPREG64_L($f29, SC_FPREGS+((F29-F0)*REGSZ_FP), a0)
+ FPREG64_L($f30, SC_FPREGS+((F30-F0)*REGSZ_FP), a0)
+ FPREG64_L($f31, SC_FPREGS+((F31-F0)*REGSZ_FP), a0)
+#else
+ lwc1 $f20, SC_FPREGS+((F20-F0)*REGSZ_FP)(a0)
+ lwc1 $f21, SC_FPREGS+((F21-F0)*REGSZ_FP)(a0)
+ lwc1 $f22, SC_FPREGS+((F22-F0)*REGSZ_FP)(a0)
+ lwc1 $f23, SC_FPREGS+((F23-F0)*REGSZ_FP)(a0)
+ lwc1 $f24, SC_FPREGS+((F24-F0)*REGSZ_FP)(a0)
+ lwc1 $f25, SC_FPREGS+((F25-F0)*REGSZ_FP)(a0)
+ lwc1 $f26, SC_FPREGS+((F26-F0)*REGSZ_FP)(a0)
+ lwc1 $f27, SC_FPREGS+((F27-F0)*REGSZ_FP)(a0)
+ lwc1 $f28, SC_FPREGS+((F28-F0)*REGSZ_FP)(a0)
+ lwc1 $f29, SC_FPREGS+((F29-F0)*REGSZ_FP)(a0)
+ lwc1 $f30, SC_FPREGS+((F30-F0)*REGSZ_FP)(a0)
+ lwc1 $f31, SC_FPREGS+((F31-F0)*REGSZ_FP)(a0)
+#endif
+#endif /* !SOFTFLOAT */
+ bne a1, zero, 1f
+ nop
+ li a1, 1 # never return 0!
+1:
+ j ra
+ move v0, a1
+
+botch:
+ jal longjmperror
+ nop
+ jal abort
+ nop
+ RESTORE_GP64
+ PTR_ADDU sp, FRAMESZ
+END(_longjmp)
+