diff --git a/CleanSpec.mk b/CleanSpec.mk
index f95f0a7..21034ad 100644
--- a/CleanSpec.mk
+++ b/CleanSpec.mk
@@ -599,6 +599,10 @@
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/dex_bootjars)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/dex_bootjars_input)
 
+$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*/libnpt.so)
+
+$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib*)
+
 # ************************************************
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************
diff --git a/core/Makefile b/core/Makefile
index fa43918..44f01ba 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -930,7 +930,7 @@
 endif
 endif
 
-INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID))
+INTERNAL_KERNEL_CMDLINE := $(strip $(INTERNAL_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID))
 ifdef INTERNAL_KERNEL_CMDLINE
 INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)"
 endif
@@ -1021,7 +1021,6 @@
 endif
 $(eval $(call copy-one-file,$(BOARD_PREBUILT_BOOTIMAGE),$(INSTALLED_BOOTIMAGE_TARGET)))
 else # BOARD_PREBUILT_BOOTIMAGE not defined
-INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE))
 INSTALLED_BOOTIMAGE_TARGET :=
 endif # BOARD_PREBUILT_BOOTIMAGE
 endif # TARGET_NO_KERNEL
diff --git a/core/autogen_test_config.mk b/core/autogen_test_config.mk
index a01d80f..6d75132 100644
--- a/core/autogen_test_config.mk
+++ b/core/autogen_test_config.mk
@@ -36,7 +36,7 @@
 $(autogen_test_config_file): PRIVATE_MODULE_NAME := $(LOCAL_MODULE)
 $(autogen_test_config_file) : $(autogen_test_config_template)
 	@echo "Auto generating test config $(notdir $@)"
-	$(hide) sed 's&{MODULE}&$(PRIVATE_MODULE_NAME)&g' $< > $@
+	$(hide) sed 's&{MODULE}&$(PRIVATE_MODULE_NAME)&g;s&{EXTRA_OPTIONS}&&g' $< > $@
 my_auto_generate_config := true
 else
 # Auto generating test config file for instrumentation test
diff --git a/core/board_config.mk b/core/board_config.mk
new file mode 100644
index 0000000..ed741c3
--- /dev/null
+++ b/core/board_config.mk
@@ -0,0 +1,508 @@
+#
+# Copyright (C) 2019 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# ###############################################################
+# This file includes BoardConfig.mk for the device being built,
+# and sanity-checks the variable defined therein.
+# ###############################################################
+
+_board_strip_readonly_list := \
+  BOARD_EGL_CFG \
+  BOARD_HAVE_BLUETOOTH \
+  BOARD_INSTALLER_CMDLINE \
+  BOARD_KERNEL_CMDLINE \
+  BOARD_KERNEL_BASE \
+  BOARD_USES_GENERIC_AUDIO \
+  BOARD_VENDOR_USE_AKMD \
+  BOARD_WPA_SUPPLICANT_DRIVER \
+  BOARD_WLAN_DEVICE \
+  TARGET_ARCH \
+  TARGET_ARCH_VARIANT \
+  TARGET_CPU_ABI \
+  TARGET_CPU_ABI2 \
+  TARGET_CPU_VARIANT \
+  TARGET_CPU_VARIANT_RUNTIME \
+  TARGET_2ND_ARCH \
+  TARGET_2ND_ARCH_VARIANT \
+  TARGET_2ND_CPU_ABI \
+  TARGET_2ND_CPU_ABI2 \
+  TARGET_2ND_CPU_VARIANT \
+  TARGET_2ND_CPU_VARIANT_RUNTIME \
+  TARGET_BOARD_PLATFORM \
+  TARGET_BOARD_PLATFORM_GPU \
+  TARGET_BOOTLOADER_BOARD_NAME \
+  TARGET_NO_BOOTLOADER \
+  TARGET_NO_KERNEL \
+  TARGET_NO_RECOVERY \
+  TARGET_NO_RADIOIMAGE \
+  TARGET_HARDWARE_3D \
+  WITH_DEXPREOPT \
+
+# File system variables
+_board_strip_readonly_list += \
+  BOARD_FLASH_BLOCK_SIZE \
+  BOARD_BOOTIMAGE_PARTITION_SIZE \
+  BOARD_RECOVERYIMAGE_PARTITION_SIZE \
+  BOARD_SYSTEMIMAGE_PARTITION_SIZE \
+  BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE \
+  BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE \
+  BOARD_USERDATAIMAGE_PARTITION_SIZE \
+  BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE \
+  BOARD_CACHEIMAGE_PARTITION_SIZE \
+  BOARD_VENDORIMAGE_PARTITION_SIZE \
+  BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE \
+  BOARD_PRODUCTIMAGE_PARTITION_SIZE \
+  BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE \
+  BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE \
+  BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE \
+  BOARD_ODMIMAGE_PARTITION_SIZE \
+  BOARD_ODMIMAGE_FILE_SYSTEM_TYPE \
+
+# Logical partitions related variables.
+_dynamic_partitions_var_list += \
+  BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE \
+  BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE \
+  BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE \
+  BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE \
+  BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE \
+  BOARD_SUPER_PARTITION_SIZE \
+  BOARD_SUPER_PARTITION_GROUPS \
+
+_board_strip_readonly_list += $(_dynamic_partitions_var_list)
+
+_build_broken_var_list := \
+  BUILD_BROKEN_ANDROIDMK_EXPORTS \
+  BUILD_BROKEN_DUP_COPY_HEADERS \
+  BUILD_BROKEN_DUP_RULES \
+  BUILD_BROKEN_PHONY_TARGETS \
+  BUILD_BROKEN_ENG_DEBUG_TAGS \
+
+_board_true_false_vars := $(_build_broken_var_list)
+_board_strip_readonly_list += $(_build_broken_var_list)
+
+# Conditional to building on linux, as dex2oat currently does not work on darwin.
+ifeq ($(HOST_OS),linux)
+  WITH_DEXPREOPT := true
+endif
+
+# ###############################################################
+# Broken build defaults
+# ###############################################################
+BUILD_BROKEN_ANDROIDMK_EXPORTS :=
+BUILD_BROKEN_DUP_COPY_HEADERS :=
+BUILD_BROKEN_DUP_RULES :=
+BUILD_BROKEN_PHONY_TARGETS :=
+BUILD_BROKEN_ENG_DEBUG_TAGS :=
+
+# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)
+# or under vendor/*/$(TARGET_DEVICE).  Search in both places, but
+# make sure only one exists.
+# Real boards should always be associated with an OEM vendor.
+ifdef TARGET_DEVICE_DIR
+  ifneq ($(origin TARGET_DEVICE_DIR),command line)
+    $(error TARGET_DEVICE_DIR may not be set manually)
+  endif
+  board_config_mk := $(TARGET_DEVICE_DIR)/BoardConfig.mk
+else
+  board_config_mk := \
+    $(strip $(sort $(wildcard \
+      $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
+      $(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+      $(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+    )))
+  ifeq ($(board_config_mk),)
+    $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
+  endif
+  ifneq ($(words $(board_config_mk)),1)
+    $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
+  endif
+  TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
+  .KATI_READONLY := TARGET_DEVICE_DIR
+endif
+include $(board_config_mk)
+ifeq ($(TARGET_ARCH),)
+  $(error TARGET_ARCH not defined by board config: $(board_config_mk))
+endif
+ifneq ($(MALLOC_IMPL),)
+  $(warning *** Unsupported option MALLOC_IMPL defined by board config: $(board_config_mk).)
+  $(error Use `MALLOC_SVELTE := true` to configure jemalloc for low-memory)
+endif
+board_config_mk :=
+
+# Clean up and verify BoardConfig variables
+$(foreach var,$(_board_strip_readonly_list),$(eval $(var) := $$(strip $$($(var)))))
+$(foreach var,$(_board_true_false_vars), \
+  $(if $(filter-out true false,$($(var))), \
+    $(error Valid values of $(var) are "true", "false", and "". Not "$($(var))")))
+
+# Default *_CPU_VARIANT_RUNTIME to CPU_VARIANT if unspecified.
+TARGET_CPU_VARIANT_RUNTIME := $(or $(TARGET_CPU_VARIANT_RUNTIME),$(TARGET_CPU_VARIANT))
+TARGET_2ND_CPU_VARIANT_RUNTIME := $(or $(TARGET_2ND_CPU_VARIANT_RUNTIME),$(TARGET_2ND_CPU_VARIANT))
+
+# The combo makefiles sanity-check and set defaults for various CPU configuration
+combo_target := TARGET_
+combo_2nd_arch_prefix :=
+include $(BUILD_SYSTEM)/combo/select.mk
+
+ifdef TARGET_2ND_ARCH
+  combo_2nd_arch_prefix := $(TARGET_2ND_ARCH_VAR_PREFIX)
+  include $(BUILD_SYSTEM)/combo/select.mk
+endif
+
+.KATI_READONLY := $(_board_strip_readonly_list)
+
+INTERNAL_KERNEL_CMDLINE := $(BOARD_KERNEL_CMDLINE)
+ifeq ($(TARGET_CPU_ABI),)
+  $(error No TARGET_CPU_ABI defined by board config: $(board_config_mk))
+endif
+ifneq ($(filter %64,$(TARGET_ARCH)),)
+  TARGET_IS_64_BIT := true
+endif
+
+ifeq (,$(filter true,$(TARGET_SUPPORTS_32_BIT_APPS) $(TARGET_SUPPORTS_64_BIT_APPS)))
+  TARGET_SUPPORTS_32_BIT_APPS := true
+endif
+
+# Sanity check to warn about likely cryptic errors later in the build.
+ifeq ($(TARGET_IS_64_BIT),true)
+  ifeq (,$(filter true false,$(TARGET_SUPPORTS_64_BIT_APPS)))
+    $(warning Building a 32-bit-app-only product on a 64-bit device. \
+      If this is intentional, set TARGET_SUPPORTS_64_BIT_APPS := false)
+  endif
+endif
+
+# "ro.product.cpu.abilist32" and "ro.product.cpu.abilist64" are
+# comma separated lists of the 32 and 64 bit ABIs (in order of
+# preference) that the target supports. If TARGET_CPU_ABI_LIST_{32,64}_BIT
+# are defined by the board config, we use them. Else, we construct
+# these lists based on whether TARGET_IS_64_BIT is set.
+#
+# Note that this assumes that the 2ND_CPU_ABI for a 64 bit target
+# is always 32 bits. If this isn't the case, these variables should
+# be overriden in the board configuration.
+ifeq (,$(TARGET_CPU_ABI_LIST_64_BIT))
+  ifeq (true|true,$(TARGET_IS_64_BIT)|$(TARGET_SUPPORTS_64_BIT_APPS))
+    TARGET_CPU_ABI_LIST_64_BIT := $(TARGET_CPU_ABI) $(TARGET_CPU_ABI2)
+  endif
+endif
+
+ifeq (,$(TARGET_CPU_ABI_LIST_32_BIT))
+  ifneq (true,$(TARGET_IS_64_BIT))
+    TARGET_CPU_ABI_LIST_32_BIT := $(TARGET_CPU_ABI) $(TARGET_CPU_ABI2)
+  else
+    ifeq (true,$(TARGET_SUPPORTS_32_BIT_APPS))
+      # For a 64 bit target, assume that the 2ND_CPU_ABI
+      # is a 32 bit ABI.
+      TARGET_CPU_ABI_LIST_32_BIT := $(TARGET_2ND_CPU_ABI) $(TARGET_2ND_CPU_ABI2)
+    endif
+  endif
+endif
+
+# "ro.product.cpu.abilist" is a comma separated list of ABIs (in order
+# of preference) that the target supports. If a TARGET_CPU_ABI_LIST
+# is specified by the board configuration, we use that. If not, we
+# build a list out of the TARGET_CPU_ABIs specified by the config.
+ifeq (,$(TARGET_CPU_ABI_LIST))
+  ifeq ($(TARGET_IS_64_BIT)|$(TARGET_PREFER_32_BIT_APPS),true|true)
+    TARGET_CPU_ABI_LIST := $(TARGET_CPU_ABI_LIST_32_BIT) $(TARGET_CPU_ABI_LIST_64_BIT)
+  else
+    TARGET_CPU_ABI_LIST := $(TARGET_CPU_ABI_LIST_64_BIT) $(TARGET_CPU_ABI_LIST_32_BIT)
+  endif
+endif
+
+# Strip whitespace from the ABI list string.
+TARGET_CPU_ABI_LIST := $(subst $(space),$(comma),$(strip $(TARGET_CPU_ABI_LIST)))
+TARGET_CPU_ABI_LIST_32_BIT := $(subst $(space),$(comma),$(strip $(TARGET_CPU_ABI_LIST_32_BIT)))
+TARGET_CPU_ABI_LIST_64_BIT := $(subst $(space),$(comma),$(strip $(TARGET_CPU_ABI_LIST_64_BIT)))
+
+ifneq ($(BUILD_BROKEN_ANDROIDMK_EXPORTS),true)
+$(KATI_obsolete_export It is a global setting. See $(CHANGES_URL)#export_keyword)
+endif
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_RAMDISK
+ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
+TARGET_COPY_OUT_RAMDISK := $(TARGET_COPY_OUT_ROOT)
+endif
+
+###########################################
+# Configure whether we're building the system image
+BUILDING_SYSTEM_IMAGE := true
+ifeq ($(PRODUCT_BUILD_SYSTEM_IMAGE),)
+  ifndef PRODUCT_USE_DYNAMIC_PARTITION_SIZE
+    ifndef BOARD_SYSTEMIMAGE_PARTITION_SIZE
+      BUILDING_SYSTEM_IMAGE :=
+    endif
+  endif
+else ifeq ($(PRODUCT_BUILD_SYSTEM_IMAGE),false)
+  BUILDING_SYSTEM_IMAGE :=
+endif
+.KATI_READONLY := BUILDING_SYSTEM_IMAGE
+
+# Are we building a system_other image
+BUILDING_SYSTEM_OTHER_IMAGE :=
+ifeq ($(PRODUCT_BUILD_SYSTEM_OTHER_IMAGE),)
+  ifdef BUILDING_SYSTEM_IMAGE
+    ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true)
+      BUILDING_SYSTEM_OTHER_IMAGE := true
+    endif
+  endif
+else ifeq ($(PRODUCT_BUILD_SYSTEM_OTHER_IMAGE),true)
+  BUILDING_SYSTEM_OTHER_IMAGE := true
+  ifndef BUILDING_SYSTEM_IMAGE
+    $(error PRODUCT_BUILD_SYSTEM_OTHER_IMAGE = true requires building the system image)
+  endif
+endif
+.KATI_READONLY := BUILDING_SYSTEM_OTHER_IMAGE
+
+# Are we building a cache image
+BUILDING_CACHE_IMAGE :=
+ifeq ($(PRODUCT_BUILD_CACHE_IMAGE),)
+  ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
+    BUILDING_CACHE_IMAGE := true
+  endif
+else ifeq ($(PRODUCT_BUILD_CACHE_IMAGE),true)
+  BUILDING_CACHE_IMAGE := true
+  ifndef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
+    $(error PRODUCT_BUILD_CACHE_IMAGE set to true, but BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE not defined)
+  endif
+endif
+.KATI_READONLY := BUILDING_CACHE_IMAGE
+
+# TODO: Add BUILDING_BOOT_IMAGE / BUILDING_RECOVERY_IMAGE
+# This gets complicated with BOARD_USES_RECOVERY_AS_BOOT, so skipping for now.
+
+# Are we building a ramdisk image
+BUILDING_RAMDISK_IMAGE := true
+ifeq ($(PRODUCT_BUILD_RAMDISK_IMAGE),)
+  # TODO: Be smarter about this. This probably only needs to happen when one of the follow is true:
+  #  BUILDING_BOOT_IMAGE
+  #  BUILDING_RECOVERY_IMAGE
+else ifeq ($(PRODUCT_BUILD_RAMDISK_IMAGE),false)
+  BUILDING_RAMDISK_IMAGE :=
+endif
+.KATI_READONLY := BUILDING_RAMDISK_IMAGE
+
+# Are we building a userdata image
+BUILDING_USERDATA_IMAGE :=
+ifeq ($(PRODUCT_BUILD_USERDATA_IMAGE),)
+  ifdef BOARD_USERDATAIMAGE_PARTITION_SIZE
+    BUILDING_USERDATA_IMAGE := true
+  endif
+else ifeq ($(PRODUCT_BUILD_USERDATA_IMAGE),true)
+  BUILDING_USERDATA_IMAGE := true
+endif
+.KATI_READONLY := BUILDING_USERDATA_IMAGE
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_VENDOR
+ifeq ($(TARGET_COPY_OUT_VENDOR),$(_vendor_path_placeholder))
+  TARGET_COPY_OUT_VENDOR := system/vendor
+else ifeq ($(filter vendor system/vendor,$(TARGET_COPY_OUT_VENDOR)),)
+  $(error TARGET_COPY_OUT_VENDOR must be either 'vendor' or 'system/vendor', seeing '$(TARGET_COPY_OUT_VENDOR)'.)
+endif
+PRODUCT_COPY_FILES := $(subst $(_vendor_path_placeholder),$(TARGET_COPY_OUT_VENDOR),$(PRODUCT_COPY_FILES))
+
+BOARD_USES_VENDORIMAGE :=
+ifdef BOARD_PREBUILT_VENDORIMAGE
+  BOARD_USES_VENDORIMAGE := true
+endif
+ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
+  BOARD_USES_VENDORIMAGE := true
+endif
+ifeq ($(TARGET_COPY_OUT_VENDOR),vendor)
+  BOARD_USES_VENDORIMAGE := true
+else ifdef BOARD_USES_VENDORIMAGE
+  $(error TARGET_COPY_OUT_VENDOR must be set to 'vendor' to use a vendor image)
+endif
+.KATI_READONLY := BOARD_USES_VENDORIMAGE
+
+BUILDING_VENDOR_IMAGE :=
+ifeq ($(PRODUCT_BUILD_VENDOR_IMAGE),)
+  ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
+    BUILDING_VENDOR_IMAGE := true
+  endif
+else ifeq ($(PRODUCT_BUILD_VENDOR_IMAGE),true)
+  BUILDING_VENDOR_IMAGE := true
+  ifndef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
+    $(error PRODUCT_BUILD_VENDOR_IMAGE set to true, but BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE not defined)
+  endif
+endif
+ifdef BOARD_PREBUILT_VENDORIMAGE
+  BUILDING_VENDOR_IMAGE :=
+endif
+.KATI_READONLY := BUILDING_VENDOR_IMAGE
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_PRODUCT
+ifeq ($(TARGET_COPY_OUT_PRODUCT),$(_product_path_placeholder))
+TARGET_COPY_OUT_PRODUCT := system/product
+else ifeq ($(filter product system/product,$(TARGET_COPY_OUT_PRODUCT)),)
+$(error TARGET_COPY_OUT_PRODUCT must be either 'product' or 'system/product', seeing '$(TARGET_COPY_OUT_PRODUCT)'.)
+endif
+PRODUCT_COPY_FILES := $(subst $(_product_path_placeholder),$(TARGET_COPY_OUT_PRODUCT),$(PRODUCT_COPY_FILES))
+
+BOARD_USES_PRODUCTIMAGE :=
+ifdef BOARD_PREBUILT_PRODUCTIMAGE
+  BOARD_USES_PRODUCTIMAGE := true
+endif
+ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
+  BOARD_USES_PRODUCTIMAGE := true
+endif
+ifeq ($(TARGET_COPY_OUT_PRODUCT),product)
+  BOARD_USES_PRODUCTIMAGE := true
+else ifdef BOARD_USES_PRODUCTIMAGE
+  $(error TARGET_COPY_OUT_PRODUCT must be set to 'product' to use a product image)
+endif
+.KATI_READONLY := BOARD_USES_PRODUCTIMAGE
+
+BUILDING_PRODUCT_IMAGE :=
+ifeq ($(PRODUCT_BUILD_PRODUCT_IMAGE),)
+  ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
+    BUILDING_PRODUCT_IMAGE := true
+  endif
+else ifeq ($(PRODUCT_BUILD_PRODUCT_IMAGE),true)
+  BUILDING_PRODUCT_IMAGE := true
+  ifndef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
+    $(error PRODUCT_BUILD_PRODUCT_IMAGE set to true, but BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE not defined)
+  endif
+endif
+ifdef BOARD_PREBUILT_PRODUCTIMAGE
+  BUILDING_PRODUCT_IMAGE :=
+endif
+.KATI_READONLY := BUILDING_PRODUCT_IMAGE
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_PRODUCT_SERVICES
+MERGE_PRODUCT_SERVICES_INTO_PRODUCT :=
+ifeq ($(TARGET_COPY_OUT_PRODUCT_SERVICES),$(_product_services_path_placeholder))
+  TARGET_COPY_OUT_PRODUCT_SERVICES := $(TARGET_COPY_OUT_PRODUCT)
+  MERGE_PRODUCT_SERVICES_INTO_PRODUCT := true
+else ifeq ($(TARGET_COPY_OUT_PRODUCT),$(TARGET_COPY_OUT_PRODUCT_SERVICES))
+  MERGE_PRODUCT_SERVICES_INTO_PRODUCT := true
+else ifeq ($(filter product_services system/product_services,$(TARGET_COPY_OUT_PRODUCT_SERVICES)),)
+  $(error TARGET_COPY_OUT_PRODUCT_SERVICES must be either 'product_services',\
+    '$(TARGET_COPY_OUT_PRODUCT)' or 'system/product_services', seeing '$(TARGET_COPY_OUT_PRODUCT_SERVICES)'.)
+endif
+.KATI_READONLY := MERGE_PRODUCT_SERVICES_INTO_PRODUCT
+PRODUCT_COPY_FILES := $(subst $(_product_services_path_placeholder),$(TARGET_COPY_OUT_PRODUCT_SERVICES),$(PRODUCT_COPY_FILES))
+
+BOARD_USES_PRODUCT_SERVICESIMAGE :=
+ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
+  BOARD_USES_PRODUCT_SERVICESIMAGE := true
+endif
+ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+  BOARD_USES_PRODUCT_SERVICESIMAGE := true
+endif
+ifeq ($(TARGET_COPY_OUT_PRODUCT_SERVICES),product_services)
+  BOARD_USES_PRODUCT_SERVICESIMAGE := true
+else ifdef BOARD_USES_PRODUCT_SERVICESIMAGE
+  $(error TARGET_COPY_OUT_PRODUCT_SERVICES must be set to 'product_services' to use a product_services image)
+endif
+
+BUILDING_PRODUCT_SERVICES_IMAGE :=
+ifeq ($(PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE),)
+  ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+    BUILDING_PRODUCT_SERVICES_IMAGE := true
+  endif
+else ifeq ($(PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE),true)
+  BUILDING_PRODUCT_SERVICES_IMAGE := true
+  ifndef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
+    $(error PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE set to true, but BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE not defined)
+  endif
+endif
+ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
+  BUILDING_PRODUCT_SERVICES_IMAGE :=
+endif
+.KATI_READONLY := BUILDING_PRODUCT_SERVICES_IMAGE
+
+###########################################
+# Now we can substitute with the real value of TARGET_COPY_OUT_ODM
+ifeq ($(TARGET_COPY_OUT_ODM),$(_odm_path_placeholder))
+  TARGET_COPY_OUT_ODM := vendor/odm
+else ifeq ($(filter odm vendor/odm,$(TARGET_COPY_OUT_ODM)),)
+  $(error TARGET_COPY_OUT_ODM must be either 'odm' or 'vendor/odm', seeing '$(TARGET_COPY_OUT_ODM)'.)
+endif
+PRODUCT_COPY_FILES := $(subst $(_odm_path_placeholder),$(TARGET_COPY_OUT_ODM),$(PRODUCT_COPY_FILES))
+
+BOARD_USES_ODMIMAGE :=
+ifdef BOARD_PREBUILT_ODMIMAGE
+  BOARD_USES_ODMIMAGE := true
+endif
+ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+  BOARD_USES_ODMIMAGE := true
+endif
+ifeq ($(TARGET_COPY_OUT_ODM),odm)
+  BOARD_USES_ODMIMAGE := true
+else ifdef BOARD_USES_ODMIMAGE
+  $(error TARGET_COPY_OUT_ODM must be set to 'odm' to use an odm image)
+endif
+
+BUILDING_ODM_IMAGE :=
+ifeq ($(ODM_BUILD_ODM_IMAGE),)
+  ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+    BUILDING_ODM_IMAGE := true
+  endif
+else ifeq ($(PRODUCT_BUILD_ODM_IMAGE),true)
+  BUILDING_ODM_IMAGE := true
+  ifndef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
+    $(error PRODUCT_BUILD_ODM_IMAGE set to true, but BOARD_ODMIMAGE_FILE_SYSTEM_TYPE not defined)
+  endif
+endif
+ifdef BOARD_PREBUILT_ODMIMAGE
+  BUILDING_ODM_IMAGE :=
+endif
+.KATI_READONLY := BUILDING_ODM_IMAGE
+
+###########################################
+# Ensure that only TARGET_RECOVERY_UPDATER_LIBS *or* AB_OTA_UPDATER is set.
+TARGET_RECOVERY_UPDATER_LIBS ?=
+AB_OTA_UPDATER ?=
+.KATI_READONLY := TARGET_RECOVERY_UPDATER_LIBS AB_OTA_UPDATER
+ifeq ($(AB_OTA_UPDATER),true)
+  ifneq ($(strip $(TARGET_RECOVERY_UPDATER_LIBS)),)
+    $(error Do not use TARGET_RECOVERY_UPDATER_LIBS when using AB_OTA_UPDATER)
+  endif
+endif
+
+# Check BOARD_VNDK_VERSION
+define check_vndk_version
+  $(eval vndk_path := prebuilts/vndk/v$(1)) \
+  $(if $(wildcard $(vndk_path)/*/Android.bp),,$(error VNDK version $(1) not found))
+endef
+
+ifdef BOARD_VNDK_VERSION
+  ifneq ($(BOARD_VNDK_VERSION),current)
+    $(error BOARD_VNDK_VERSION: Only "current" is implemented)
+  endif
+
+  TARGET_VENDOR_TEST_SUFFIX := /vendor
+else
+  TARGET_VENDOR_TEST_SUFFIX :=
+endif
+
+ifeq (,$(TARGET_BUILD_APPS))
+ifdef PRODUCT_EXTRA_VNDK_VERSIONS
+  $(foreach v,$(PRODUCT_EXTRA_VNDK_VERSIONS),$(call check_vndk_version,$(v)))
+endif
+endif
+
+# Ensure that BOARD_SYSTEMSDK_VERSIONS are all within PLATFORM_SYSTEMSDK_VERSIONS
+_unsupported_systemsdk_versions := $(filter-out $(PLATFORM_SYSTEMSDK_VERSIONS),$(BOARD_SYSTEMSDK_VERSIONS))
+ifneq (,$(_unsupported_systemsdk_versions))
+  $(error System SDK versions '$(_unsupported_systemsdk_versions)' in BOARD_SYSTEMSDK_VERSIONS are not supported.\
+          Supported versions are $(PLATFORM_SYSTEMSDK_VERSIONS))
+endif
diff --git a/core/combo/TARGET_linux-arm.mk b/core/combo/TARGET_linux-arm.mk
index 9514edb..cbca1fb 100644
--- a/core/combo/TARGET_linux-arm.mk
+++ b/core/combo/TARGET_linux-arm.mk
@@ -29,45 +29,38 @@
 # include defines, and compiler settings for the given architecture
 # version.
 #
-ifeq ($(strip $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT)),)
-TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT := generic
-endif
 
 KNOWN_ARMv8_CORES := cortex-a53 cortex-a53.a57 cortex-a55 cortex-a73 cortex-a75 cortex-a76
 KNOWN_ARMv8_CORES += kryo kryo385 exynos-m1 exynos-m2
 
 KNOWN_ARMv82a_CORES := cortex-a55 cortex-a75 kryo385
 
-# Check for cores that implement armv8-2a ISAs.
+ifeq (,$(strip $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT)))
+  TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT := generic
+endif
+
+# This sanity checks TARGET_2ND_ARCH_VARIANT against the lists above.
 ifneq (,$(filter $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT), $(KNOWN_ARMv82a_CORES)))
-  ifneq ($(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT),armv8-2a)
-    $(warning $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT) is armv8-2a.)
-    ifneq (,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
-      $(warning TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT, $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT), ignored! Use armv8-2a instead.)
-    endif
-    # Overwrite TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT
+  ifeq (,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
     TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT := armv8-2a
+  else ifneq (armv8-2a,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
+    $(error Incorrect TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT, $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT). Use armv8-2a instead.)
   endif
-# Many devices (incorrectly) use armv7-a-neon as the 2nd architecture variant
-# for cores that implement armv8-a ISAs. The following sets it to armv8-a.
 else ifneq (,$(filter $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT), $(KNOWN_ARMv8_CORES)))
-  ifneq ($(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT),armv8-a)
-    $(warning $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT) is armv8-a.)
-    ifneq (,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
-      $(warning TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT, $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT), ignored! Use armv8-a instead.)
-    endif
-    # Overwrite TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT
+  ifeq (,$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
     TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT := armv8-a
+  else ifneq ($(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT),armv8-a)
+    $(error Incorrect TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT, $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT). Use armv8-a instead.)
   endif
 endif
 
 ifeq ($(strip $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT)),)
-$(error TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT must be set)
+  $(error TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT must be set)
 endif
 
 TARGET_ARCH_SPECIFIC_MAKEFILE := $(BUILD_COMBOS)/arch/$(TARGET_$(combo_2nd_arch_prefix)ARCH)/$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT).mk
 ifeq ($(strip $(wildcard $(TARGET_ARCH_SPECIFIC_MAKEFILE))),)
-$(error Unknown ARM architecture version: $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
+  $(error Unknown ARM architecture version: $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
 endif
 
 include $(TARGET_ARCH_SPECIFIC_MAKEFILE)
diff --git a/core/config.mk b/core/config.mk
index 5f08f2f..242558e 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -208,15 +208,6 @@
 endif
 
 # ###############################################################
-# Broken build defaults
-# ###############################################################
-BUILD_BROKEN_ANDROIDMK_EXPORTS :=
-BUILD_BROKEN_DUP_COPY_HEADERS :=
-BUILD_BROKEN_DUP_RULES :=
-BUILD_BROKEN_PHONY_TARGETS :=
-BUILD_BROKEN_ENG_DEBUG_TAGS :=
-
-# ###############################################################
 # Include sub-configuration files
 # ###############################################################
 
@@ -296,29 +287,7 @@
 TARGET_PRODUCT_KERNEL_HEADERS := $(strip $(wildcard $(PRODUCT_VENDOR_KERNEL_HEADERS)))
 TARGET_PRODUCT_KERNEL_HEADERS := $(patsubst %/,%,$(TARGET_PRODUCT_KERNEL_HEADERS))
 $(call validate-kernel-headers,$(TARGET_PRODUCT_KERNEL_HEADERS))
-
-# Clean up/verify variables defined by the board config file.
-# TODO: Move this to right after the BoardConfig parsing.
-TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME))
-TARGET_CPU_ABI := $(strip $(TARGET_CPU_ABI))
-ifeq ($(TARGET_CPU_ABI),)
-  $(error No TARGET_CPU_ABI defined by board config: $(board_config_mk))
-endif
-TARGET_CPU_ABI2 := $(strip $(TARGET_CPU_ABI2))
-TARGET_CPU_VARIANT := $(strip $(TARGET_CPU_VARIANT))
-TARGET_CPU_VARIANT_RUNTIME := $(strip $(TARGET_CPU_VARIANT_RUNTIME))
-
-TARGET_2ND_CPU_ABI := $(strip $(TARGET_2ND_CPU_ABI))
-TARGET_2ND_CPU_ABI2 := $(strip $(TARGET_2ND_CPU_ABI2))
-TARGET_2ND_CPU_VARIANT := $(strip $(TARGET_2ND_CPU_VARIANT))
-TARGET_2ND_CPU_VARIANT_RUNTIME := $(strip $(TARGET_2ND_CPU_VARIANT_RUNTIME))
-
-# Default *_CPU_VARIANT_RUNTIME to CPU_VARIANT if unspecified.
-TARGET_CPU_VARIANT_RUNTIME := $(or $(TARGET_CPU_VARIANT_RUNTIME),$(TARGET_CPU_VARIANT))
-TARGET_2ND_CPU_VARIANT_RUNTIME := $(or $(TARGET_2ND_CPU_VARIANT_RUNTIME),$(TARGET_2ND_CPU_VARIANT))
-
-BOARD_KERNEL_BASE := $(strip $(BOARD_KERNEL_BASE))
-BOARD_KERNEL_PAGESIZE := $(strip $(BOARD_KERNEL_PAGESIZE))
+.KATI_READONLY := TARGET_DEVICE_KERNEL_HEADERS TARGET_BOARD_KERNEL_HEADERS TARGET_PRODUCT_KERNEL_HEADERS
 
 # Commands to generate .toc file common to ELF .so files.
 define _gen_toc_command_for_elf
@@ -332,44 +301,6 @@
 $(hide) $(HOST_NM) -gP $(1) | cut -f1-2 -d" " | (grep -v U$$ >> $(2) || true)
 endef
 
-combo_target := HOST_
-combo_2nd_arch_prefix :=
-include $(BUILD_SYSTEM)/combo/select.mk
-
-# Load the 2nd host arch if it's needed.
-ifdef HOST_2ND_ARCH
-combo_target := HOST_
-combo_2nd_arch_prefix := $(HOST_2ND_ARCH_VAR_PREFIX)
-include $(BUILD_SYSTEM)/combo/select.mk
-endif
-
-# Load the windows cross compiler under Linux
-ifdef HOST_CROSS_OS
-combo_target := HOST_CROSS_
-combo_2nd_arch_prefix :=
-include $(BUILD_SYSTEM)/combo/select.mk
-
-ifdef HOST_CROSS_2ND_ARCH
-combo_target := HOST_CROSS_
-combo_2nd_arch_prefix := $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)
-include $(BUILD_SYSTEM)/combo/select.mk
-endif
-endif
-
-# on windows, the tools have .exe at the end, and we depend on the
-# host config stuff being done first
-
-combo_target := TARGET_
-combo_2nd_arch_prefix :=
-include $(BUILD_SYSTEM)/combo/select.mk
-
-# Load the 2nd target arch if it's needed.
-ifdef TARGET_2ND_ARCH
-combo_target := TARGET_
-combo_2nd_arch_prefix := $(TARGET_2ND_ARCH_VAR_PREFIX)
-include $(BUILD_SYSTEM)/combo/select.mk
-endif
-
 ifeq ($(CALLED_FROM_SETUP),true)
 include $(BUILD_SYSTEM)/ccache.mk
 include $(BUILD_SYSTEM)/goma.mk
@@ -380,62 +311,6 @@
 TARGET_PREFER_32_BIT_EXECUTABLES := true
 endif
 
-ifeq (,$(filter true,$(TARGET_SUPPORTS_32_BIT_APPS) $(TARGET_SUPPORTS_64_BIT_APPS)))
-  TARGET_SUPPORTS_32_BIT_APPS := true
-endif
-
-# Sanity check to warn about likely cryptic errors later in the build.
-ifeq ($(TARGET_IS_64_BIT),true)
-  ifeq (,$(filter true false,$(TARGET_SUPPORTS_64_BIT_APPS)))
-    $(warning Building a 32-bit-app-only product on a 64-bit device. \
-      If this is intentional, set TARGET_SUPPORTS_64_BIT_APPS := false)
-  endif
-endif
-
-# "ro.product.cpu.abilist32" and "ro.product.cpu.abilist64" are
-# comma separated lists of the 32 and 64 bit ABIs (in order of
-# preference) that the target supports. If TARGET_CPU_ABI_LIST_{32,64}_BIT
-# are defined by the board config, we use them. Else, we construct
-# these lists based on whether TARGET_IS_64_BIT is set.
-#
-# Note that this assumes that the 2ND_CPU_ABI for a 64 bit target
-# is always 32 bits. If this isn't the case, these variables should
-# be overriden in the board configuration.
-ifeq (,$(TARGET_CPU_ABI_LIST_64_BIT))
-  ifeq (true|true,$(TARGET_IS_64_BIT)|$(TARGET_SUPPORTS_64_BIT_APPS))
-    TARGET_CPU_ABI_LIST_64_BIT := $(TARGET_CPU_ABI) $(TARGET_CPU_ABI2)
-  endif
-endif
-
-ifeq (,$(TARGET_CPU_ABI_LIST_32_BIT))
-  ifneq (true,$(TARGET_IS_64_BIT))
-    TARGET_CPU_ABI_LIST_32_BIT := $(TARGET_CPU_ABI) $(TARGET_CPU_ABI2)
-  else
-    ifeq (true,$(TARGET_SUPPORTS_32_BIT_APPS))
-      # For a 64 bit target, assume that the 2ND_CPU_ABI
-      # is a 32 bit ABI.
-      TARGET_CPU_ABI_LIST_32_BIT := $(TARGET_2ND_CPU_ABI) $(TARGET_2ND_CPU_ABI2)
-    endif
-  endif
-endif
-
-# "ro.product.cpu.abilist" is a comma separated list of ABIs (in order
-# of preference) that the target supports. If a TARGET_CPU_ABI_LIST
-# is specified by the board configuration, we use that. If not, we
-# build a list out of the TARGET_CPU_ABIs specified by the config.
-ifeq (,$(TARGET_CPU_ABI_LIST))
-  ifeq ($(TARGET_IS_64_BIT)|$(TARGET_PREFER_32_BIT_APPS),true|true)
-    TARGET_CPU_ABI_LIST := $(TARGET_CPU_ABI_LIST_32_BIT) $(TARGET_CPU_ABI_LIST_64_BIT)
-  else
-    TARGET_CPU_ABI_LIST := $(TARGET_CPU_ABI_LIST_64_BIT) $(TARGET_CPU_ABI_LIST_32_BIT)
-  endif
-endif
-
-# Strip whitespace from the ABI list string.
-TARGET_CPU_ABI_LIST := $(subst $(space),$(comma),$(strip $(TARGET_CPU_ABI_LIST)))
-TARGET_CPU_ABI_LIST_32_BIT := $(subst $(space),$(comma),$(strip $(TARGET_CPU_ABI_LIST_32_BIT)))
-TARGET_CPU_ABI_LIST_64_BIT := $(subst $(space),$(comma),$(strip $(TARGET_CPU_ABI_LIST_64_BIT)))
-
 # GCC version selection
 TARGET_GCC_VERSION := 4.9
 ifdef TARGET_2ND_ARCH
@@ -891,6 +766,7 @@
 else
   DEFAULT_SYSTEM_DEV_CERTIFICATE := build/target/product/security/testkey
 endif
+.KATI_READONLY := DEFAULT_SYSTEM_DEV_CERTIFICATE
 
 BUILD_NUMBER_FROM_FILE := $$(cat $(OUT_DIR)/build_number.txt)
 BUILD_DATETIME_FROM_FILE := $$(cat $(BUILD_DATETIME_FILE))
@@ -1067,7 +943,7 @@
 endif
 
 # The metadata device must be supplied to init via the kernel command-line.
-BOARD_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
+INTERNAL_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
 
 BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE := true
 
@@ -1101,7 +977,7 @@
 endif
 
 ifneq ($(BOARD_SUPER_PARTITION_METADATA_DEVICE),super)
-BOARD_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
+INTERNAL_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
 endif
 BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE :=
 
diff --git a/core/definitions.mk b/core/definitions.mk
index c97f647..c46a873 100644
--- a/core/definitions.mk
+++ b/core/definitions.mk
@@ -2225,7 +2225,7 @@
 @mkdir -p $(dir $@)
 $(hide) rm -f $(dir $@)classes*.dex $(dir $@)d8_input.jar
 $(hide) $(ZIP2ZIP) -j -i $< -o $(dir $@)d8_input.jar "**/*.class"
-$(hide) $(DX_COMMAND) \
+$(hide) $(DX_COMMAND) $(DEX_FLAGS) \
     --output $(dir $@) \
     $(addprefix --lib ,$(PRIVATE_D8_LIBS)) \
     --min-api $(PRIVATE_MIN_SDK_VERSION) \
@@ -2388,7 +2388,7 @@
 define run-appcompat
 $(hide) \
   echo "appcompat.sh output:" >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log && \
-  PACKAGING=$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING ANDROID_LOG_TAGS="*:e" art/tools/veridex/appcompat.sh --dex-file=$@ 2>&1 >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log
+  PACKAGING=$(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING ANDROID_LOG_TAGS="*:e" art/tools/veridex/appcompat.sh --dex-file=$@ --api-flags=$(INTERNAL_PLATFORM_HIDDENAPI_FLAGS) 2>&1 >> $(PRODUCT_OUT)/appcompat/$(PRIVATE_MODULE).log
 endef
 appcompat-files = \
   art/tools/veridex/appcompat.sh \
@@ -2697,7 +2697,8 @@
 define transform-jar-to-dex-r8
 @echo R8: $@
 $(hide) rm -f $(PRIVATE_PROGUARD_DICTIONARY)
-$(hide) $(R8_COMPAT_PROGUARD) -injars '$<' \
+$(hide) $(R8_COMPAT_PROGUARD) $(DEX_FLAGS) \
+    -injars '$<' \
     --min-api $(PRIVATE_MIN_SDK_VERSION) \
     --no-data-resources \
     --force-proguard-compatibility --output $(subst classes.dex,,$@) \
diff --git a/core/dex_preopt_config.mk b/core/dex_preopt_config.mk
index 9bf2be8..13e4634 100644
--- a/core/dex_preopt_config.mk
+++ b/core/dex_preopt_config.mk
@@ -20,7 +20,6 @@
 endif
 # Conditional to building on linux, as dex2oat currently does not work on darwin.
 ifeq ($(HOST_OS),linux)
-  WITH_DEXPREOPT ?= true
   ifeq (eng,$(TARGET_BUILD_VARIANT))
     # Don't strip for quick development turnarounds.
     DEX_PREOPT_DEFAULT := nostripping
diff --git a/core/envsetup.mk b/core/envsetup.mk
index cc427ca..506ec4d 100644
--- a/core/envsetup.mk
+++ b/core/envsetup.mk
@@ -152,6 +152,45 @@
   HOST_2ND_ARCH :=
 endif
 
+HOST_2ND_ARCH_VAR_PREFIX := 2ND_
+HOST_2ND_ARCH_MODULE_SUFFIX := _32
+HOST_CROSS_2ND_ARCH_VAR_PREFIX := 2ND_
+HOST_CROSS_2ND_ARCH_MODULE_SUFFIX := _64
+TARGET_2ND_ARCH_VAR_PREFIX := 2ND_
+.KATI_READONLY := \
+  HOST_ARCH \
+  HOST_2ND_ARCH \
+  HOST_IS_64_BIT \
+  HOST_2ND_ARCH_VAR_PREFIX \
+  HOST_2ND_ARCH_MODULE_SUFFIX \
+  HOST_CROSS_2ND_ARCH_VAR_PREFIX \
+  HOST_CROSS_2ND_ARCH_MODULE_SUFFIX \
+  TARGET_2ND_ARCH_VAR_PREFIX \
+
+combo_target := HOST_
+combo_2nd_arch_prefix :=
+include $(BUILD_COMBOS)/select.mk
+
+ifdef HOST_2ND_ARCH
+  combo_2nd_arch_prefix := $(HOST_2ND_ARCH_VAR_PREFIX)
+  include $(BUILD_SYSTEM)/combo/select.mk
+endif
+
+# Load the windows cross compiler under Linux
+ifdef HOST_CROSS_OS
+  combo_target := HOST_CROSS_
+  combo_2nd_arch_prefix :=
+  include $(BUILD_SYSTEM)/combo/select.mk
+
+  ifdef HOST_CROSS_2ND_ARCH
+    combo_2nd_arch_prefix := $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)
+    include $(BUILD_SYSTEM)/combo/select.mk
+  endif
+endif
+
+# on windows, the tools have .exe at the end, and we depend on the
+# host config stuff being done first
+
 BUILD_ARCH := $(HOST_ARCH)
 BUILD_2ND_ARCH := $(HOST_2ND_ARCH)
 
@@ -232,349 +271,9 @@
 endif
 
 SDK_HOST_ARCH := x86
-
-# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)
-# or under vendor/*/$(TARGET_DEVICE).  Search in both places, but
-# make sure only one exists.
-# Real boards should always be associated with an OEM vendor.
-ifdef TARGET_DEVICE_DIR
-  ifneq ($(origin TARGET_DEVICE_DIR),command line)
-    $(error TARGET_DEVICE_DIR may not be set manually)
-  endif
-  board_config_mk := $(TARGET_DEVICE_DIR)/BoardConfig.mk
-else
-  board_config_mk := \
-    $(strip $(sort $(wildcard \
-      $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
-      $(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
-      $(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
-    )))
-  ifeq ($(board_config_mk),)
-    $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
-  endif
-  ifneq ($(words $(board_config_mk)),1)
-    $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
-  endif
-  TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
-  .KATI_READONLY := TARGET_DEVICE_DIR
-endif
-include $(board_config_mk)
-ifeq ($(TARGET_ARCH),)
-  $(error TARGET_ARCH not defined by board config: $(board_config_mk))
-endif
-ifneq ($(MALLOC_IMPL),)
-  $(warning *** Unsupported option MALLOC_IMPL defined by board config: $(board_config_mk).)
-  $(error Use `MALLOC_SVELTE := true` to configure jemalloc for low-memory)
-endif
-board_config_mk :=
-
-###########################################
-# Handle BUILD_BROKEN_* settings
-vars := \
-  BUILD_BROKEN_ANDROIDMK_EXPORTS \
-  BUILD_BROKEN_DUP_COPY_HEADERS \
-  BUILD_BROKEN_DUP_RULES \
-  BUILD_BROKEN_PHONY_TARGETS \
-  BUILD_BROKEN_ENG_DEBUG_TAGS
-
-$(foreach var,$(vars),$(eval $(var) := $$(strip $$($(var)))))
-
-$(foreach var,$(vars), \
-  $(if $(filter-out true false,$($(var))), \
-    $(error Valid values of $(var) are "true", "false", and "". Not "$($(var))")))
-
-.KATI_READONLY := $(vars)
-
-ifneq ($(BUILD_BROKEN_ANDROIDMK_EXPORTS),true)
-$(KATI_obsolete_export It is a global setting. See $(CHANGES_URL)#export_keyword)
-endif
-
-###########################################
-# Now we can substitute with the real value of TARGET_COPY_OUT_RAMDISK
-ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
-TARGET_COPY_OUT_RAMDISK := $(TARGET_COPY_OUT_ROOT)
-endif
-
-###########################################
-# Configure whether we're building the system image
-BUILDING_SYSTEM_IMAGE := true
-ifeq ($(PRODUCT_BUILD_SYSTEM_IMAGE),)
-  ifndef PRODUCT_USE_DYNAMIC_PARTITION_SIZE
-    ifndef BOARD_SYSTEMIMAGE_PARTITION_SIZE
-      BUILDING_SYSTEM_IMAGE :=
-    endif
-  endif
-else ifeq ($(PRODUCT_BUILD_SYSTEM_IMAGE),false)
-  BUILDING_SYSTEM_IMAGE :=
-endif
-.KATI_READONLY := BUILDING_SYSTEM_IMAGE
-
-# Are we building a system_other image
-BUILDING_SYSTEM_OTHER_IMAGE :=
-ifeq ($(PRODUCT_BUILD_SYSTEM_OTHER_IMAGE),)
-  ifdef BUILDING_SYSTEM_IMAGE
-    ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true)
-      BUILDING_SYSTEM_OTHER_IMAGE := true
-    endif
-  endif
-else ifeq ($(PRODUCT_BUILD_SYSTEM_OTHER_IMAGE),true)
-  BUILDING_SYSTEM_OTHER_IMAGE := true
-  ifndef BUILDING_SYSTEM_IMAGE
-    $(error PRODUCT_BUILD_SYSTEM_OTHER_IMAGE = true requires building the system image)
-  endif
-endif
-.KATI_READONLY := BUILDING_SYSTEM_OTHER_IMAGE
-
-# Are we building a cache image
-BUILDING_CACHE_IMAGE :=
-ifeq ($(PRODUCT_BUILD_CACHE_IMAGE),)
-  ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
-    BUILDING_CACHE_IMAGE := true
-  endif
-else ifeq ($(PRODUCT_BUILD_CACHE_IMAGE),true)
-  BUILDING_CACHE_IMAGE := true
-  ifndef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE
-    $(error PRODUCT_BUILD_CACHE_IMAGE set to true, but BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE not defined)
-  endif
-endif
-.KATI_READONLY := BUILDING_CACHE_IMAGE
-
-# TODO: Add BUILDING_BOOT_IMAGE / BUILDING_RECOVERY_IMAGE
-# This gets complicated with BOARD_USES_RECOVERY_AS_BOOT, so skipping for now.
-
-# Are we building a ramdisk image
-BUILDING_RAMDISK_IMAGE := true
-ifeq ($(PRODUCT_BUILD_RAMDISK_IMAGE),)
-  # TODO: Be smarter about this. This probably only needs to happen when one of the follow is true:
-  #  BUILDING_BOOT_IMAGE
-  #  BUILDING_RECOVERY_IMAGE
-else ifeq ($(PRODUCT_BUILD_RAMDISK_IMAGE),false)
-  BUILDING_RAMDISK_IMAGE :=
-endif
-.KATI_READONLY := BUILDING_RAMDISK_IMAGE
-
-# Are we building a userdata image
-BUILDING_USERDATA_IMAGE :=
-ifeq ($(PRODUCT_BUILD_USERDATA_IMAGE),)
-  ifdef BOARD_USERDATAIMAGE_PARTITION_SIZE
-    BUILDING_USERDATA_IMAGE := true
-  endif
-else ifeq ($(PRODUCT_BUILD_USERDATA_IMAGE),true)
-  BUILDING_USERDATA_IMAGE := true
-endif
-.KATI_READONLY := BUILDING_USERDATA_IMAGE
-
-###########################################
-# Now we can substitute with the real value of TARGET_COPY_OUT_VENDOR
-ifeq ($(TARGET_COPY_OUT_VENDOR),$(_vendor_path_placeholder))
-  TARGET_COPY_OUT_VENDOR := system/vendor
-else ifeq ($(filter vendor system/vendor,$(TARGET_COPY_OUT_VENDOR)),)
-  $(error TARGET_COPY_OUT_VENDOR must be either 'vendor' or 'system/vendor', seeing '$(TARGET_COPY_OUT_VENDOR)'.)
-endif
-PRODUCT_COPY_FILES := $(subst $(_vendor_path_placeholder),$(TARGET_COPY_OUT_VENDOR),$(PRODUCT_COPY_FILES))
-
-BOARD_USES_VENDORIMAGE :=
-ifdef BOARD_PREBUILT_VENDORIMAGE
-  BOARD_USES_VENDORIMAGE := true
-endif
-ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
-  BOARD_USES_VENDORIMAGE := true
-endif
-ifeq ($(TARGET_COPY_OUT_VENDOR),vendor)
-  BOARD_USES_VENDORIMAGE := true
-else ifdef BOARD_USES_VENDORIMAGE
-  $(error TARGET_COPY_OUT_VENDOR must be set to 'vendor' to use a vendor image)
-endif
-.KATI_READONLY := BOARD_USES_VENDORIMAGE
-
-BUILDING_VENDOR_IMAGE :=
-ifeq ($(PRODUCT_BUILD_VENDOR_IMAGE),)
-  ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
-    BUILDING_VENDOR_IMAGE := true
-  endif
-else ifeq ($(PRODUCT_BUILD_VENDOR_IMAGE),true)
-  BUILDING_VENDOR_IMAGE := true
-  ifndef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
-    $(error PRODUCT_BUILD_VENDOR_IMAGE set to true, but BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE not defined)
-  endif
-endif
-ifdef BOARD_PREBUILT_VENDORIMAGE
-  BUILDING_VENDOR_IMAGE :=
-endif
-.KATI_READONLY := BUILDING_VENDOR_IMAGE
-
-###########################################
-# Now we can substitute with the real value of TARGET_COPY_OUT_PRODUCT
-ifeq ($(TARGET_COPY_OUT_PRODUCT),$(_product_path_placeholder))
-TARGET_COPY_OUT_PRODUCT := system/product
-else ifeq ($(filter product system/product,$(TARGET_COPY_OUT_PRODUCT)),)
-$(error TARGET_COPY_OUT_PRODUCT must be either 'product' or 'system/product', seeing '$(TARGET_COPY_OUT_PRODUCT)'.)
-endif
-PRODUCT_COPY_FILES := $(subst $(_product_path_placeholder),$(TARGET_COPY_OUT_PRODUCT),$(PRODUCT_COPY_FILES))
-
-BOARD_USES_PRODUCTIMAGE :=
-ifdef BOARD_PREBUILT_PRODUCTIMAGE
-  BOARD_USES_PRODUCTIMAGE := true
-endif
-ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
-  BOARD_USES_PRODUCTIMAGE := true
-endif
-ifeq ($(TARGET_COPY_OUT_PRODUCT),product)
-  BOARD_USES_PRODUCTIMAGE := true
-else ifdef BOARD_USES_PRODUCTIMAGE
-  $(error TARGET_COPY_OUT_PRODUCT must be set to 'product' to use a product image)
-endif
-.KATI_READONLY := BOARD_USES_PRODUCTIMAGE
-
-BUILDING_PRODUCT_IMAGE :=
-ifeq ($(PRODUCT_BUILD_PRODUCT_IMAGE),)
-  ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
-    BUILDING_PRODUCT_IMAGE := true
-  endif
-else ifeq ($(PRODUCT_BUILD_PRODUCT_IMAGE),true)
-  BUILDING_PRODUCT_IMAGE := true
-  ifndef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE
-    $(error PRODUCT_BUILD_PRODUCT_IMAGE set to true, but BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE not defined)
-  endif
-endif
-ifdef BOARD_PREBUILT_PRODUCTIMAGE
-  BUILDING_PRODUCT_IMAGE :=
-endif
-.KATI_READONLY := BUILDING_PRODUCT_IMAGE
-
-###########################################
-# Now we can substitute with the real value of TARGET_COPY_OUT_PRODUCT_SERVICES
-MERGE_PRODUCT_SERVICES_INTO_PRODUCT :=
-ifeq ($(TARGET_COPY_OUT_PRODUCT_SERVICES),$(_product_services_path_placeholder))
-  TARGET_COPY_OUT_PRODUCT_SERVICES := $(TARGET_COPY_OUT_PRODUCT)
-  MERGE_PRODUCT_SERVICES_INTO_PRODUCT := true
-else ifeq ($(TARGET_COPY_OUT_PRODUCT),$(TARGET_COPY_OUT_PRODUCT_SERVICES))
-  MERGE_PRODUCT_SERVICES_INTO_PRODUCT := true
-else ifeq ($(filter product_services system/product_services,$(TARGET_COPY_OUT_PRODUCT_SERVICES)),)
-  $(error TARGET_COPY_OUT_PRODUCT_SERVICES must be either 'product_services',\
-    '$(TARGET_COPY_OUT_PRODUCT)' or 'system/product_services', seeing '$(TARGET_COPY_OUT_PRODUCT_SERVICES)'.)
-endif
-.KATI_READONLY := MERGE_PRODUCT_SERVICES_INTO_PRODUCT
-PRODUCT_COPY_FILES := $(subst $(_product_services_path_placeholder),$(TARGET_COPY_OUT_PRODUCT_SERVICES),$(PRODUCT_COPY_FILES))
-
-BOARD_USES_PRODUCT_SERVICESIMAGE :=
-ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
-  BOARD_USES_PRODUCT_SERVICESIMAGE := true
-endif
-ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
-  BOARD_USES_PRODUCT_SERVICESIMAGE := true
-endif
-ifeq ($(TARGET_COPY_OUT_PRODUCT_SERVICES),product_services)
-  BOARD_USES_PRODUCT_SERVICESIMAGE := true
-else ifdef BOARD_USES_PRODUCT_SERVICESIMAGE
-  $(error TARGET_COPY_OUT_PRODUCT_SERVICES must be set to 'product_services' to use a product_services image)
-endif
-
-BUILDING_PRODUCT_SERVICES_IMAGE :=
-ifeq ($(PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE),)
-  ifdef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
-    BUILDING_PRODUCT_SERVICES_IMAGE := true
-  endif
-else ifeq ($(PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE),true)
-  BUILDING_PRODUCT_SERVICES_IMAGE := true
-  ifndef BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE
-    $(error PRODUCT_BUILD_PRODUCT_SERVICES_IMAGE set to true, but BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE not defined)
-  endif
-endif
-ifdef BOARD_PREBUILT_PRODUCT_SERVICESIMAGE
-  BUILDING_PRODUCT_SERVICES_IMAGE :=
-endif
-.KATI_READONLY := BUILDING_PRODUCT_SERVICES_IMAGE
-
-###########################################
-# Now we can substitute with the real value of TARGET_COPY_OUT_ODM
-ifeq ($(TARGET_COPY_OUT_ODM),$(_odm_path_placeholder))
-  TARGET_COPY_OUT_ODM := vendor/odm
-else ifeq ($(filter odm vendor/odm,$(TARGET_COPY_OUT_ODM)),)
-  $(error TARGET_COPY_OUT_ODM must be either 'odm' or 'vendor/odm', seeing '$(TARGET_COPY_OUT_ODM)'.)
-endif
-PRODUCT_COPY_FILES := $(subst $(_odm_path_placeholder),$(TARGET_COPY_OUT_ODM),$(PRODUCT_COPY_FILES))
-
-BOARD_USES_ODMIMAGE :=
-ifdef BOARD_PREBUILT_ODMIMAGE
-  BOARD_USES_ODMIMAGE := true
-endif
-ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
-  BOARD_USES_ODMIMAGE := true
-endif
-ifeq ($(TARGET_COPY_OUT_ODM),odm)
-  BOARD_USES_ODMIMAGE := true
-else ifdef BOARD_USES_ODMIMAGE
-  $(error TARGET_COPY_OUT_ODM must be set to 'odm' to use an odm image)
-endif
-
-BUILDING_ODM_IMAGE :=
-ifeq ($(ODM_BUILD_ODM_IMAGE),)
-  ifdef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
-    BUILDING_ODM_IMAGE := true
-  endif
-else ifeq ($(PRODUCT_BUILD_ODM_IMAGE),true)
-  BUILDING_ODM_IMAGE := true
-  ifndef BOARD_ODMIMAGE_FILE_SYSTEM_TYPE
-    $(error PRODUCT_BUILD_ODM_IMAGE set to true, but BOARD_ODMIMAGE_FILE_SYSTEM_TYPE not defined)
-  endif
-endif
-ifdef BOARD_PREBUILT_ODMIMAGE
-  BUILDING_ODM_IMAGE :=
-endif
-.KATI_READONLY := BUILDING_ODM_IMAGE
-
-###########################################
-# Ensure that only TARGET_RECOVERY_UPDATER_LIBS *or* AB_OTA_UPDATER is set.
-TARGET_RECOVERY_UPDATER_LIBS ?=
-AB_OTA_UPDATER ?=
-.KATI_READONLY := TARGET_RECOVERY_UPDATER_LIBS AB_OTA_UPDATER
-ifeq ($(AB_OTA_UPDATER),true)
-  ifneq ($(strip $(TARGET_RECOVERY_UPDATER_LIBS)),)
-    $(error Do not use TARGET_RECOVERY_UPDATER_LIBS when using AB_OTA_UPDATER)
-  endif
-endif
-
-# Check BOARD_VNDK_VERSION
-define check_vndk_version
-  $(eval vndk_path := prebuilts/vndk/v$(1)) \
-  $(if $(wildcard $(vndk_path)/*/Android.bp),,$(error VNDK version $(1) not found))
-endef
-
-ifdef BOARD_VNDK_VERSION
-  ifneq ($(BOARD_VNDK_VERSION),current)
-    $(error BOARD_VNDK_VERSION: Only "current" is implemented)
-  endif
-
-  TARGET_VENDOR_TEST_SUFFIX := /vendor
-else
-  TARGET_VENDOR_TEST_SUFFIX :=
-endif
-
-ifeq (,$(TARGET_BUILD_APPS))
-ifdef PRODUCT_EXTRA_VNDK_VERSIONS
-  $(foreach v,$(PRODUCT_EXTRA_VNDK_VERSIONS),$(call check_vndk_version,$(v)))
-endif
-endif
-
-# Ensure that BOARD_SYSTEMSDK_VERSIONS are all within PLATFORM_SYSTEMSDK_VERSIONS
-_unsupported_systemsdk_versions := $(filter-out $(PLATFORM_SYSTEMSDK_VERSIONS),$(BOARD_SYSTEMSDK_VERSIONS))
-ifneq (,$(_unsupported_systemsdk_versions))
-  $(error System SDK versions '$(_unsupported_systemsdk_versions)' in BOARD_SYSTEMSDK_VERSIONS are not supported.\
-          Supported versions are $(PLATFORM_SYSTEMSDK_VERSIONS))
-endif
-
-# ---------------------------------------------------------------
-# Set up configuration for target machine.
-# The following must be set:
-# 		TARGET_OS = { linux }
-# 		TARGET_ARCH = { arm | x86 | mips }
-
 TARGET_OS := linux
-# TARGET_ARCH should be set by BoardConfig.mk and will be checked later
-ifneq ($(filter %64,$(TARGET_ARCH)),)
-TARGET_IS_64_BIT := true
-endif
+
+include $(BUILD_SYSTEM)/board_config.mk
 
 # the target build type defaults to release
 ifneq ($(TARGET_BUILD_TYPE),debug)
@@ -681,8 +380,6 @@
 .KATI_READONLY := HOST_OUT_TEST_CONFIG
 
 # Out for HOST_2ND_ARCH
-HOST_2ND_ARCH_VAR_PREFIX := 2ND_
-HOST_2ND_ARCH_MODULE_SUFFIX := _32
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATES := $(HOST_OUT)/obj32
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES := $(HOST_OUT)/lib
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_EXECUTABLES := $(HOST_OUT_EXECUTABLES)
@@ -690,8 +387,6 @@
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_NATIVE_TESTS := $(HOST_OUT)/nativetest
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_TESTCASES := $(HOST_OUT_TESTCASES)
 .KATI_READONLY := \
-  HOST_2ND_ARCH_VAR_PREFIX \
-  HOST_2ND_ARCH_MODULE_SUFFIX \
   $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATES \
   $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES \
   $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_EXECUTABLES \
@@ -705,15 +400,11 @@
 .KATI_READONLY := HOST_LIBRARY_PATH
 
 # Out for HOST_CROSS_2ND_ARCH
-HOST_CROSS_2ND_ARCH_VAR_PREFIX := 2ND_
-HOST_CROSS_2ND_ARCH_MODULE_SUFFIX := _64
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_INTERMEDIATES := $(HOST_CROSS_OUT)/obj64
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_SHARED_LIBRARIES := $(HOST_CROSS_OUT)/lib64
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_EXECUTABLES := $(HOST_CROSS_OUT_EXECUTABLES)
 $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_NATIVE_TESTS := $(HOST_CROSS_OUT)/nativetest64
 .KATI_READONLY := \
-  HOST_CROSS_2ND_ARCH_VAR_PREFIX \
-  HOST_CROSS_2ND_ARCH_MODULE_SUFFIX \
   $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_INTERMEDIATES \
   $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_SHARED_LIBRARIES \
   $(HOST_CROSS_2ND_ARCH_VAR_PREFIX)HOST_CROSS_OUT_EXECUTABLES \
@@ -800,14 +491,13 @@
 .KATI_READONLY := TARGET_OUT_SYSTEM_OTHER
 
 # Out for TARGET_2ND_ARCH
-TARGET_2ND_ARCH_VAR_PREFIX := $(HOST_2ND_ARCH_VAR_PREFIX)
 ifeq ($(TARGET_TRANSLATE_2ND_ARCH),true)
 # With this you can reference the arm binary translation library with libfoo_arm in PRODUCT_PACKAGES.
 TARGET_2ND_ARCH_MODULE_SUFFIX := _$(TARGET_2ND_ARCH)
 else
 TARGET_2ND_ARCH_MODULE_SUFFIX := $(HOST_2ND_ARCH_MODULE_SUFFIX)
 endif
-.KATI_READONLY := TARGET_2ND_ARCH_VAR_PREFIX TARGET_2ND_ARCH_MODULE_SUFFIX
+.KATI_READONLY := TARGET_2ND_ARCH_MODULE_SUFFIX
 
 ifneq ($(filter address,$(SANITIZE_TARGET)),)
   $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES := $(PRODUCT_OUT)/obj_$(TARGET_2ND_ARCH)_asan
diff --git a/core/main.mk b/core/main.mk
index b63fd61..8b43867 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -1031,6 +1031,8 @@
 define auto-included-modules
   $(if $(BOARD_VNDK_VERSION),vndk_package) \
   $(if $(DEVICE_MANIFEST_FILE),device_manifest.xml) \
+  $(if $(ODM_MANIFEST_FILES),odm_manifest.xml) \
+  $(if $(ODM_MANIFEST_SKUS),$(foreach sku, $(ODM_MANIFEST_SKUS),odm_manifest_$(sku).xml)) \
 
 endef
 
diff --git a/core/native_test_config_template.xml b/core/native_test_config_template.xml
index a88d57c..f3d3231 100644
--- a/core/native_test_config_template.xml
+++ b/core/native_test_config_template.xml
@@ -17,6 +17,9 @@
 <configuration description="Runs {MODULE}.">
     <option name="test-suite-tag" value="apct" />
     <option name="test-suite-tag" value="apct-native" />
+
+    {EXTRA_OPTIONS}
+
     <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
         <option name="cleanup" value="true" />
         <option name="push" value="{MODULE}->/data/local/tmp/{MODULE}" />
diff --git a/core/product.mk b/core/product.mk
index efe029b..fba2ed3 100644
--- a/core/product.mk
+++ b/core/product.mk
@@ -366,80 +366,10 @@
 $(strip $(call _resolve-short-product-name,$(1)))
 endef
 
-
-_product_stash_var_list := $(_product_var_list) \
-  PRODUCT_BOOTCLASSPATH \
-  PRODUCT_SYSTEM_SERVER_CLASSPATH \
-  TARGET_ARCH \
-  TARGET_ARCH_VARIANT \
-  TARGET_CPU_ABI \
-  TARGET_CPU_ABI2 \
-  TARGET_CPU_VARIANT \
-  TARGET_CPU_VARIANT_RUNTIME \
-  TARGET_2ND_ARCH \
-  TARGET_2ND_ARCH_VARIANT \
-  TARGET_2ND_CPU_ABI \
-  TARGET_2ND_CPU_ABI2 \
-  TARGET_2ND_CPU_VARIANT \
-  TARGET_2ND_CPU_VARIANT_RUNTIME \
-  TARGET_BOARD_PLATFORM \
-  TARGET_BOARD_PLATFORM_GPU \
-  TARGET_BOARD_KERNEL_HEADERS \
-  TARGET_DEVICE_KERNEL_HEADERS \
-  TARGET_PRODUCT_KERNEL_HEADERS \
-  TARGET_BOOTLOADER_BOARD_NAME \
-  TARGET_NO_BOOTLOADER \
-  TARGET_NO_KERNEL \
-  TARGET_NO_RECOVERY \
-  TARGET_NO_RADIOIMAGE \
-  TARGET_HARDWARE_3D \
-
-_product_stash_var_list += \
-  BOARD_WPA_SUPPLICANT_DRIVER \
-  BOARD_WLAN_DEVICE \
-  BOARD_USES_GENERIC_AUDIO \
-  BOARD_KERNEL_CMDLINE \
-  BOARD_KERNEL_BASE \
-  BOARD_HAVE_BLUETOOTH \
-  BOARD_VENDOR_USE_AKMD \
-  BOARD_EGL_CFG \
-  BOARD_BOOTIMAGE_PARTITION_SIZE \
-  BOARD_RECOVERYIMAGE_PARTITION_SIZE \
-  BOARD_SYSTEMIMAGE_PARTITION_SIZE \
-  BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_USERDATAIMAGE_PARTITION_SIZE \
-  BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_CACHEIMAGE_PARTITION_SIZE \
-  BOARD_FLASH_BLOCK_SIZE \
-  BOARD_VENDORIMAGE_PARTITION_SIZE \
-  BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_PRODUCTIMAGE_PARTITION_SIZE \
-  BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE \
-  BOARD_PRODUCT_SERVICESIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_ODMIMAGE_PARTITION_SIZE \
-  BOARD_ODMIMAGE_FILE_SYSTEM_TYPE \
-  BOARD_INSTALLER_CMDLINE \
-
-
-_product_stash_var_list += \
-  DEFAULT_SYSTEM_DEV_CERTIFICATE \
-  WITH_DEXPREOPT \
-  WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY
-
-# Logical partitions related variables.
-_dynamic_partitions_var_list += \
-  BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE \
-  BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE \
-  BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE \
-  BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE \
-  BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE \
-  BOARD_SUPER_PARTITION_SIZE \
-  BOARD_SUPER_PARTITION_GROUPS \
-
-_product_stash_var_list += $(_dynamic_partitions_var_list)
-_product_strip_var_list := $(_dynamic_partitions_var_list)
+_product_stash_var_list := $(_product_var_list)
+# TODO: Move this to board_config.mk when no longer set in product makefiles
+_product_stash_var_list += WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY
+_product_strip_var_list :=
 
 #
 # Mark the variables in _product_stash_var_list as readonly
diff --git a/target/board/Android.mk b/target/board/Android.mk
index 7fe45eb..971a7b2 100644
--- a/target/board/Android.mk
+++ b/target/board/Android.mk
@@ -52,3 +52,59 @@
 include $(BUILD_PREBUILT)
 BUILT_VENDOR_MANIFEST := $(LOCAL_BUILT_MODULE)
 endif
+
+# ODM manifest
+ifdef ODM_MANIFEST_FILES
+# ODM_MANIFEST_FILES is a list of files that is combined and installed as the default ODM manifest.
+include $(CLEAR_VARS)
+LOCAL_MODULE := odm_manifest.xml
+LOCAL_MODULE_STEM := manifest.xml
+LOCAL_MODULE_CLASS := ETC
+LOCAL_MODULE_RELATIVE_PATH := vintf
+LOCAL_ODM_MODULE := true
+
+GEN := $(local-generated-sources-dir)/manifest.xml
+$(GEN): PRIVATE_SRC_FILES := $(ODM_MANIFEST_FILES)
+$(GEN): $(ODM_MANIFEST_FILES) $(HOST_OUT_EXECUTABLES)/assemble_vintf
+	# Set VINTF_IGNORE_TARGET_FCM_VERSION to true because it should only be in device manifest.
+	VINTF_IGNORE_TARGET_FCM_VERSION=true \
+	$(HOST_OUT_EXECUTABLES)/assemble_vintf -o $@ \
+		-i $(call normalize-path-list,$(PRIVATE_SRC_FILES))
+
+LOCAL_PREBUILT_MODULE_FILE := $(GEN)
+include $(BUILD_PREBUILT)
+endif # ODM_MANIFEST_FILES
+
+# ODM_MANIFEST_SKUS: a list of SKUS where ODM_MANIFEST_<sku>_FILES are defined.
+ifdef ODM_MANIFEST_SKUS
+
+# Install /odm/etc/vintf/manifest_$(sku).xml
+# $(1): sku
+define _add_odm_sku_manifest
+my_fragment_files_var := ODM_MANIFEST_$$(call to-upper,$(1))_FILES
+ifndef $$(my_fragment_files_var)
+$$(error $(1) is in ODM_MANIFEST_SKUS but $$(my_fragment_files_var) is not defined)
+endif
+my_fragment_files := $$($$(my_fragment_files_var))
+include $$(CLEAR_VARS)
+LOCAL_MODULE := odm_manifest_$(1).xml
+LOCAL_MODULE_STEM := manifest_$(1).xml
+LOCAL_MODULE_CLASS := ETC
+LOCAL_MODULE_RELATIVE_PATH := vintf
+LOCAL_ODM_MODULE := true
+GEN := $$(local-generated-sources-dir)/manifest_$(1).xml
+$$(GEN): PRIVATE_SRC_FILES := $$(my_fragment_files)
+$$(GEN): $$(my_fragment_files) $$(HOST_OUT_EXECUTABLES)/assemble_vintf
+	VINTF_IGNORE_TARGET_FCM_VERSION=true \
+	$$(HOST_OUT_EXECUTABLES)/assemble_vintf -o $$@ \
+		-i $$(call normalize-path-list,$$(PRIVATE_SRC_FILES))
+LOCAL_PREBUILT_MODULE_FILE := $$(GEN)
+include $$(BUILD_PREBUILT)
+my_fragment_files_var :=
+my_fragment_files :=
+endef
+
+$(foreach sku, $(ODM_MANIFEST_SKUS), $(eval $(call _add_odm_sku_manifest,$(sku))))
+_add_odm_sku_manifest :=
+
+endif # ODM_MANIFEST_SKUS
diff --git a/target/product/runtime_libart.mk b/target/product/runtime_libart.mk
index c337e91..fa35d43 100644
--- a/target/product/runtime_libart.mk
+++ b/target/product/runtime_libart.mk
@@ -38,11 +38,6 @@
     libicui18n \
     libicuuc \
 
-# TODO(b/124498388): This currently needs to be in /system/lib for the debugger
-# transport to work.
-PRODUCT_PACKAGES += \
-    libnpt
-
 # Android Runtime APEX module.
 PRODUCT_PACKAGES += com.android.runtime