allow separate source and target files for applypatch
Allow applypatch to use different filenames for the source and target.
(Using the same filename is still fine; in fact the target filename
can be specified as "-" to mean "same as the source file.) This will
allow us to still use diffs in the case of files being renamed, and
will allow us to use diffs for the boot and recovery images.
diff --git a/tools/applypatch/applypatch.sh b/tools/applypatch/applypatch.sh
index 181cd5c..88f3025 100755
--- a/tools/applypatch/applypatch.sh
+++ b/tools/applypatch/applypatch.sh
@@ -24,16 +24,22 @@
# partition that WORK_DIR is located on, without the leading slash
WORK_FS=system
+# set to 0 to use a device instead
+USE_EMULATOR=1
+
# ------------------------
tmpdir=$(mktemp -d)
-emulator -wipe-data -noaudio -no-window -port $EMULATOR_PORT &
-pid_emulator=$!
+if [ "$USE_EMULATOR" == 1 ]; then
+ emulator -wipe-data -noaudio -no-window -port $EMULATOR_PORT &
+ pid_emulator=$!
+ ADB="adb -s emulator-$EMULATOR_PORT "
+else
+ ADB="adb -d "
+fi
-ADB="adb -s emulator-$EMULATOR_PORT "
-
-echo "emulator is $pid_emulator; waiting for startup"
+echo "waiting to connect to device"
$ADB wait-for-device
echo "device is available"
$ADB remount
@@ -56,7 +62,8 @@
echo
echo FAIL: $testname
echo
- kill $pid_emulator
+ [ "$open_pid" == "" ] || kill $open_pid
+ [ "$pid_emulator" == "" ] || kill $pid_emulator
exit 1
}
@@ -68,6 +75,23 @@
run_command df | awk "/$1/ {print gensub(/K/, \"\", \"g\", \$6)}"
}
+cleanup() {
+ # not necessary if we're about to kill the emulator, but nice for
+ # running on real devices or already-running emulators.
+ testname "removing test files"
+ run_command rm $WORK_DIR/bloat.dat
+ run_command rm $WORK_DIR/old.file
+ run_command rm $WORK_DIR/patch.bsdiff
+ run_command rm $WORK_DIR/applypatch
+ run_command rm $CACHE_TEMP_SOURCE
+ run_command rm /cache/bloat*.dat
+
+ [ "$pid_emulator" == "" ] || kill $pid_emulator
+
+ rm -rf $tmpdir
+}
+
+cleanup
$ADB push $ANDROID_PRODUCT_OUT/system/bin/applypatch $WORK_DIR/applypatch
@@ -146,16 +170,71 @@
fi
testname "apply bsdiff patch"
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
testname "reapply bsdiff patch"
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+# --------------- apply patch in new location ----------------------
+
+$ADB push $DATA_DIR/old.file $WORK_DIR
+$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
+
+# Check that the partition has enough space to apply the patch without
+# copying. If it doesn't, we'll be testing the low-space condition
+# when we intend to test the not-low-space condition.
+testname "apply patch to new location (with enough space)"
+free_kb=$(free_space $WORK_FS)
+echo "${free_kb}kb free on /$WORK_FS."
+if (( free_kb * 1024 < NEW_SIZE * 3 / 2 )); then
+ echo "Not enough space on /$WORK_FS to patch test file."
+ echo
+ echo "This doesn't mean that applypatch is necessarily broken;"
+ echo "just that /$WORK_FS doesn't have enough free space to"
+ echo "properly run this test."
+ exit 1
+fi
+
+run_command rm $WORK_DIR/new.file
+run_command rm $CACHE_TEMP_SOURCE
+
+testname "apply bsdiff patch to new location"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/new.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+testname "reapply bsdiff patch to new location"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/new.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
+# put some junk in the old file
+run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
+
+testname "apply bsdiff patch to new location with corrupted source"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo || fail
+$ADB pull $WORK_DIR/new.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+# put some junk in the cache copy, too
+run_command dd if=/dev/urandom of=$CACHE_TEMP_SOURCE count=100 bs=1024 || fail
+
+run_command rm $WORK_DIR/new.file
+testname "apply bsdiff patch to new location with corrupted source and copy (no new file)"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo && fail
+
+# put some junk in the new file
+run_command dd if=/dev/urandom of=$WORK_DIR/new.file count=100 bs=1024 || fail
+
+testname "apply bsdiff patch to new location with corrupted source and copy (bad new file)"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo && fail
+
# --------------- apply patch with low space on /system ----------------------
$ADB push $DATA_DIR/old.file $WORK_DIR
@@ -169,12 +248,12 @@
echo "${free_kb}kb free on /$WORK_FS now."
testname "apply bsdiff patch with low space"
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
testname "reapply bsdiff patch with low space"
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
@@ -213,7 +292,7 @@
run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
# should fail; not enough files can be deleted
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff && fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff && fail
run_command ls /cache/bloat_large.dat || fail # wasn't deleted because it was open
run_command ls /cache/subdir/a.file || fail # wasn't deleted because it's in a subdir
run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
@@ -229,7 +308,7 @@
run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
# should succeed
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
run_command ls /cache/subdir/a.file || fail # still wasn't deleted because it's in a subdir
@@ -242,7 +321,7 @@
run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
testname "apply bsdiff patch from cache (corrupted source) with low space"
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
@@ -251,20 +330,14 @@
run_command rm $WORK_DIR/old.file
testname "apply bsdiff patch from cache (missing source) with low space"
-run_command $WORK_DIR/applypatch $WORK_DIR/old.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
# --------------- cleanup ----------------------
-# not necessary if we're about to kill the emulator, but nice for
-# running on real devices or already-running emulators.
-run_command rm /cache/bloat*.dat $WORK_DIR/bloat.dat $CACHE_TEMP_SOURCE $WORK_DIR/old.file $WORK_DIR/patch.xdelta3 $WORK_DIR/patch.bsdiff $WORK_DIR/applypatch
-
-kill $pid_emulator
-
-rm -rf $tmpdir
+cleanup
echo
echo PASS