diff --git a/include/camera/CameraParameters.h b/include/camera/CameraParameters.h
new file mode 100644
index 0000000..7edf6b4
--- /dev/null
+++ b/include/camera/CameraParameters.h
@@ -0,0 +1,666 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_CAMERA_PARAMETERS_H
+#define ANDROID_HARDWARE_CAMERA_PARAMETERS_H
+
+#include <utils/KeyedVector.h>
+#include <utils/String8.h>
+
+namespace android {
+
+struct Size {
+    int width;
+    int height;
+
+    Size() {
+        width = 0;
+        height = 0;
+    }
+
+    Size(int w, int h) {
+        width = w;
+        height = h;
+    }
+};
+
+class CameraParameters
+{
+public:
+    CameraParameters();
+    CameraParameters(const String8 &params) { unflatten(params); }
+    ~CameraParameters();
+
+    String8 flatten() const;
+    void unflatten(const String8 &params);
+
+    void set(const char *key, const char *value);
+    void set(const char *key, int value);
+    void setFloat(const char *key, float value);
+    const char *get(const char *key) const;
+    int getInt(const char *key) const;
+    float getFloat(const char *key) const;
+
+    void remove(const char *key);
+
+    void setPreviewSize(int width, int height);
+    void getPreviewSize(int *width, int *height) const;
+    void getSupportedPreviewSizes(Vector<Size> &sizes) const;
+
+    // Set the dimensions in pixels to the given width and height
+    // for video frames. The given width and height must be one
+    // of the supported dimensions returned from
+    // getSupportedVideoSizes(). Must not be called if
+    // getSupportedVideoSizes() returns an empty Vector of Size.
+    void setVideoSize(int width, int height);
+    // Retrieve the current dimensions (width and height)
+    // in pixels for video frames, which must be one of the
+    // supported dimensions returned from getSupportedVideoSizes().
+    // Must not be called if getSupportedVideoSizes() returns an
+    // empty Vector of Size.
+    void getVideoSize(int *width, int *height) const;
+    // Retrieve a Vector of supported dimensions (width and height)
+    // in pixels for video frames. If sizes returned from the method
+    // is empty, the camera does not support calls to setVideoSize()
+    // or getVideoSize(). In adddition, it also indicates that
+    // the camera only has a single output, and does not have
+    // separate output for video frames and preview frame.
+    void getSupportedVideoSizes(Vector<Size> &sizes) const;
+    // Retrieve the preferred preview size (width and height) in pixels
+    // for video recording. The given width and height must be one of
+    // supported preview sizes returned from getSupportedPreviewSizes().
+    // Must not be called if getSupportedVideoSizes() returns an empty
+    // Vector of Size. If getSupportedVideoSizes() returns an empty
+    // Vector of Size, the width and height returned from this method
+    // is invalid, and is "-1x-1".
+    void getPreferredPreviewSizeForVideo(int *width, int *height) const;
+
+    void setPreviewFrameRate(int fps);
+    int getPreviewFrameRate() const;
+    void getPreviewFpsRange(int *min_fps, int *max_fps) const;
+    void setPreviewFormat(const char *format);
+    const char *getPreviewFormat() const;
+    void setPictureSize(int width, int height);
+    void getPictureSize(int *width, int *height) const;
+    void getSupportedPictureSizes(Vector<Size> &sizes) const;
+    void setPictureFormat(const char *format);
+    const char *getPictureFormat() const;
+
+    void dump() const;
+    status_t dump(int fd, const Vector<String16>& args) const;
+
+    // Parameter keys to communicate between camera application and driver.
+    // The access (read/write, read only, or write only) is viewed from the
+    // perspective of applications, not driver.
+
+    // Preview frame size in pixels (width x height).
+    // Example value: "480x320". Read/Write.
+    static const char KEY_PREVIEW_SIZE[];
+    // Supported preview frame sizes in pixels.
+    // Example value: "800x600,480x320". Read only.
+    static const char KEY_SUPPORTED_PREVIEW_SIZES[];
+    // The current minimum and maximum preview fps. This controls the rate of
+    // preview frames received (CAMERA_MSG_PREVIEW_FRAME). The minimum and
+    // maximum fps must be one of the elements from
+    // KEY_SUPPORTED_PREVIEW_FPS_RANGE parameter.
+    // Example value: "10500,26623"
+    static const char KEY_PREVIEW_FPS_RANGE[];
+    // The supported preview fps (frame-per-second) ranges. Each range contains
+    // a minimum fps and maximum fps. If minimum fps equals to maximum fps, the
+    // camera outputs frames in fixed frame rate. If not, the camera outputs
+    // frames in auto frame rate. The actual frame rate fluctuates between the
+    // minimum and the maximum. The list has at least one element. The list is
+    // sorted from small to large (first by maximum fps and then minimum fps).
+    // Example value: "(10500,26623),(15000,26623),(30000,30000)"
+    static const char KEY_SUPPORTED_PREVIEW_FPS_RANGE[];
+    // The image format for preview frames. See CAMERA_MSG_PREVIEW_FRAME in
+    // frameworks/base/include/camera/Camera.h.
+    // Example value: "yuv420sp" or PIXEL_FORMAT_XXX constants. Read/write.
+    static const char KEY_PREVIEW_FORMAT[];
+    // Supported image formats for preview frames.
+    // Example value: "yuv420sp,yuv422i-yuyv". Read only.
+    static const char KEY_SUPPORTED_PREVIEW_FORMATS[];
+    // Number of preview frames per second. This is the target frame rate. The
+    // actual frame rate depends on the driver.
+    // Example value: "15". Read/write.
+    static const char KEY_PREVIEW_FRAME_RATE[];
+    // Supported number of preview frames per second.
+    // Example value: "24,15,10". Read.
+    static const char KEY_SUPPORTED_PREVIEW_FRAME_RATES[];
+    // The dimensions for captured pictures in pixels (width x height).
+    // Example value: "1024x768". Read/write.
+    static const char KEY_PICTURE_SIZE[];
+    // Supported dimensions for captured pictures in pixels.
+    // Example value: "2048x1536,1024x768". Read only.
+    static const char KEY_SUPPORTED_PICTURE_SIZES[];
+    // The image format for captured pictures. See CAMERA_MSG_COMPRESSED_IMAGE
+    // in frameworks/base/include/camera/Camera.h.
+    // Example value: "jpeg" or PIXEL_FORMAT_XXX constants. Read/write.
+    static const char KEY_PICTURE_FORMAT[];
+    // Supported image formats for captured pictures.
+    // Example value: "jpeg,rgb565". Read only.
+    static const char KEY_SUPPORTED_PICTURE_FORMATS[];
+    // The width (in pixels) of EXIF thumbnail in Jpeg picture.
+    // Example value: "512". Read/write.
+    static const char KEY_JPEG_THUMBNAIL_WIDTH[];
+    // The height (in pixels) of EXIF thumbnail in Jpeg picture.
+    // Example value: "384". Read/write.
+    static const char KEY_JPEG_THUMBNAIL_HEIGHT[];
+    // Supported EXIF thumbnail sizes (width x height). 0x0 means not thumbnail
+    // in EXIF.
+    // Example value: "512x384,320x240,0x0". Read only.
+    static const char KEY_SUPPORTED_JPEG_THUMBNAIL_SIZES[];
+    // The quality of the EXIF thumbnail in Jpeg picture. The range is 1 to 100,
+    // with 100 being the best.
+    // Example value: "90". Read/write.
+    static const char KEY_JPEG_THUMBNAIL_QUALITY[];
+    // Jpeg quality of captured picture. The range is 1 to 100, with 100 being
+    // the best.
+    // Example value: "90". Read/write.
+    static const char KEY_JPEG_QUALITY[];
+    // The rotation angle in degrees relative to the orientation of the camera.
+    // This affects the pictures returned from CAMERA_MSG_COMPRESSED_IMAGE. The
+    // camera driver may set orientation in the EXIF header without rotating the
+    // picture. Or the driver may rotate the picture and the EXIF thumbnail. If
+    // the Jpeg picture is rotated, the orientation in the EXIF header will be
+    // missing or 1 (row #0 is top and column #0 is left side).
+    //
+    // Note that the JPEG pictures of front-facing cameras are not mirrored
+    // as in preview display.
+    //
+    // For example, suppose the natural orientation of the device is portrait.
+    // The device is rotated 270 degrees clockwise, so the device orientation is
+    // 270. Suppose a back-facing camera sensor is mounted in landscape and the
+    // top side of the camera sensor is aligned with the right edge of the
+    // display in natural orientation. So the camera orientation is 90. The
+    // rotation should be set to 0 (270 + 90).
+    //
+    // Example value: "0" or "90" or "180" or "270". Write only.
+    static const char KEY_ROTATION[];
+    // GPS latitude coordinate. GPSLatitude and GPSLatitudeRef will be stored in
+    // JPEG EXIF header.
+    // Example value: "25.032146" or "-33.462809". Write only.
+    static const char KEY_GPS_LATITUDE[];
+    // GPS longitude coordinate. GPSLongitude and GPSLongitudeRef will be stored
+    // in JPEG EXIF header.
+    // Example value: "121.564448" or "-70.660286". Write only.
+    static const char KEY_GPS_LONGITUDE[];
+    // GPS altitude. GPSAltitude and GPSAltitudeRef will be stored in JPEG EXIF
+    // header.
+    // Example value: "21.0" or "-5". Write only.
+    static const char KEY_GPS_ALTITUDE[];
+    // GPS timestamp (UTC in seconds since January 1, 1970). This should be
+    // stored in JPEG EXIF header.
+    // Example value: "1251192757". Write only.
+    static const char KEY_GPS_TIMESTAMP[];
+    // GPS Processing Method
+    // Example value: "GPS" or "NETWORK". Write only.
+    static const char KEY_GPS_PROCESSING_METHOD[];
+    // Current white balance setting.
+    // Example value: "auto" or WHITE_BALANCE_XXX constants. Read/write.
+    static const char KEY_WHITE_BALANCE[];
+    // Supported white balance settings.
+    // Example value: "auto,incandescent,daylight". Read only.
+    static const char KEY_SUPPORTED_WHITE_BALANCE[];
+    // Current color effect setting.
+    // Example value: "none" or EFFECT_XXX constants. Read/write.
+    static const char KEY_EFFECT[];
+    // Supported color effect settings.
+    // Example value: "none,mono,sepia". Read only.
+    static const char KEY_SUPPORTED_EFFECTS[];
+    // Current antibanding setting.
+    // Example value: "auto" or ANTIBANDING_XXX constants. Read/write.
+    static const char KEY_ANTIBANDING[];
+    // Supported antibanding settings.
+    // Example value: "auto,50hz,60hz,off". Read only.
+    static const char KEY_SUPPORTED_ANTIBANDING[];
+    // Current scene mode.
+    // Example value: "auto" or SCENE_MODE_XXX constants. Read/write.
+    static const char KEY_SCENE_MODE[];
+    // Supported scene mode settings.
+    // Example value: "auto,night,fireworks". Read only.
+    static const char KEY_SUPPORTED_SCENE_MODES[];
+    // Current flash mode.
+    // Example value: "auto" or FLASH_MODE_XXX constants. Read/write.
+    static const char KEY_FLASH_MODE[];
+    // Supported flash modes.
+    // Example value: "auto,on,off". Read only.
+    static const char KEY_SUPPORTED_FLASH_MODES[];
+    // Current focus mode. This will not be empty. Applications should call
+    // CameraHardwareInterface.autoFocus to start the focus if focus mode is
+    // FOCUS_MODE_AUTO or FOCUS_MODE_MACRO.
+    // Example value: "auto" or FOCUS_MODE_XXX constants. Read/write.
+    static const char KEY_FOCUS_MODE[];
+    // Supported focus modes.
+    // Example value: "auto,macro,fixed". Read only.
+    static const char KEY_SUPPORTED_FOCUS_MODES[];
+    // The maximum number of focus areas supported. This is the maximum length
+    // of KEY_FOCUS_AREAS.
+    // Example value: "0" or "2". Read only.
+    static const char KEY_MAX_NUM_FOCUS_AREAS[];
+    // Current focus areas.
+    //
+    // Before accessing this parameter, apps should check
+    // KEY_MAX_NUM_FOCUS_AREAS first to know the maximum number of focus areas
+    // first. If the value is 0, focus area is not supported.
+    //
+    // Each focus area is a five-element int array. The first four elements are
+    // the rectangle of the area (left, top, right, bottom). The direction is
+    // relative to the sensor orientation, that is, what the sensor sees. The
+    // direction is not affected by the rotation or mirroring of
+    // CAMERA_CMD_SET_DISPLAY_ORIENTATION. Coordinates range from -1000 to 1000.
+    // (-1000,-1000) is the upper left point. (1000, 1000) is the lower right
+    // point. The width and height of focus areas cannot be 0 or negative.
+    //
+    // The fifth element is the weight. Values for weight must range from 1 to
+    // 1000.  The weight should be interpreted as a per-pixel weight - all
+    // pixels in the area have the specified weight. This means a small area
+    // with the same weight as a larger area will have less influence on the
+    // focusing than the larger area. Focus areas can partially overlap and the
+    // driver will add the weights in the overlap region.
+    //
+    // A special case of single focus area (0,0,0,0,0) means driver to decide
+    // the focus area. For example, the driver may use more signals to decide
+    // focus areas and change them dynamically. Apps can set (0,0,0,0,0) if they
+    // want the driver to decide focus areas.
+    //
+    // Focus areas are relative to the current field of view (KEY_ZOOM). No
+    // matter what the zoom level is, (-1000,-1000) represents the top of the
+    // currently visible camera frame. The focus area cannot be set to be
+    // outside the current field of view, even when using zoom.
+    //
+    // Focus area only has effect if the current focus mode is FOCUS_MODE_AUTO,
+    // FOCUS_MODE_MACRO, FOCUS_MODE_CONTINUOUS_VIDEO, or
+    // FOCUS_MODE_CONTINUOUS_PICTURE.
+    // Example value: "(-10,-10,0,0,300),(0,0,10,10,700)". Read/write.
+    static const char KEY_FOCUS_AREAS[];
+    // Focal length in millimeter.
+    // Example value: "4.31". Read only.
+    static const char KEY_FOCAL_LENGTH[];
+    // Horizontal angle of view in degrees.
+    // Example value: "54.8". Read only.
+    static const char KEY_HORIZONTAL_VIEW_ANGLE[];
+    // Vertical angle of view in degrees.
+    // Example value: "42.5". Read only.
+    static const char KEY_VERTICAL_VIEW_ANGLE[];
+    // Exposure compensation index. 0 means exposure is not adjusted.
+    // Example value: "0" or "5". Read/write.
+    static const char KEY_EXPOSURE_COMPENSATION[];
+    // The maximum exposure compensation index (>=0).
+    // Example value: "6". Read only.
+    static const char KEY_MAX_EXPOSURE_COMPENSATION[];
+    // The minimum exposure compensation index (<=0).
+    // Example value: "-6". Read only.
+    static const char KEY_MIN_EXPOSURE_COMPENSATION[];
+    // The exposure compensation step. Exposure compensation index multiply by
+    // step eqals to EV. Ex: if exposure compensation index is 6 and step is
+    // 0.3333, EV is -2.
+    // Example value: "0.333333333" or "0.5". Read only.
+    static const char KEY_EXPOSURE_COMPENSATION_STEP[];
+    // The state of the auto-exposure lock. "true" means that
+    // auto-exposure is locked to its current value and will not
+    // change. "false" means the auto-exposure routine is free to
+    // change exposure values. If auto-exposure is already locked,
+    // setting this to true again has no effect (the driver will not
+    // recalculate exposure values). Changing exposure compensation
+    // settings will still affect the exposure settings while
+    // auto-exposure is locked. Stopping preview or taking a still
+    // image will not change the lock. In conjunction with
+    // exposure compensation, this allows for capturing multi-exposure
+    // brackets with known relative exposure values. Locking
+    // auto-exposure after open but before the first call to
+    // startPreview may result in severely over- or under-exposed
+    // images.  The driver will not change the AE lock after
+    // auto-focus completes.
+    static const char KEY_AUTO_EXPOSURE_LOCK[];
+    // Whether locking the auto-exposure is supported. "true" means it is, and
+    // "false" or this key not existing means it is not supported.
+    static const char KEY_AUTO_EXPOSURE_LOCK_SUPPORTED[];
+    // The state of the auto-white balance lock. "true" means that
+    // auto-white balance is locked to its current value and will not
+    // change. "false" means the auto-white balance routine is free to
+    // change white balance values. If auto-white balance is already
+    // locked, setting this to true again has no effect (the driver
+    // will not recalculate white balance values). Stopping preview or
+    // taking a still image will not change the lock. In conjunction
+    // with exposure compensation, this allows for capturing
+    // multi-exposure brackets with fixed white balance. Locking
+    // auto-white balance after open but before the first call to
+    // startPreview may result in severely incorrect color.  The
+    // driver will not change the AWB lock after auto-focus
+    // completes.
+    static const char KEY_AUTO_WHITEBALANCE_LOCK[];
+    // Whether locking the auto-white balance is supported. "true"
+    // means it is, and "false" or this key not existing means it is
+    // not supported.
+    static const char KEY_AUTO_WHITEBALANCE_LOCK_SUPPORTED[];
+
+    // The maximum number of metering areas supported. This is the maximum
+    // length of KEY_METERING_AREAS.
+    // Example value: "0" or "2". Read only.
+    static const char KEY_MAX_NUM_METERING_AREAS[];
+    // Current metering areas. Camera driver uses these areas to decide
+    // exposure.
+    //
+    // Before accessing this parameter, apps should check
+    // KEY_MAX_NUM_METERING_AREAS first to know the maximum number of metering
+    // areas first. If the value is 0, metering area is not supported.
+    //
+    // Each metering area is a rectangle with specified weight. The direction is
+    // relative to the sensor orientation, that is, what the sensor sees. The
+    // direction is not affected by the rotation or mirroring of
+    // CAMERA_CMD_SET_DISPLAY_ORIENTATION. Coordinates of the rectangle range
+    // from -1000 to 1000. (-1000, -1000) is the upper left point. (1000, 1000)
+    // is the lower right point. The width and height of metering areas cannot
+    // be 0 or negative.
+    //
+    // The fifth element is the weight. Values for weight must range from 1 to
+    // 1000.  The weight should be interpreted as a per-pixel weight - all
+    // pixels in the area have the specified weight. This means a small area
+    // with the same weight as a larger area will have less influence on the
+    // metering than the larger area. Metering areas can partially overlap and
+    // the driver will add the weights in the overlap region.
+    //
+    // A special case of all-zero single metering area means driver to decide
+    // the metering area. For example, the driver may use more signals to decide
+    // metering areas and change them dynamically. Apps can set all-zero if they
+    // want the driver to decide metering areas.
+    //
+    // Metering areas are relative to the current field of view (KEY_ZOOM).
+    // No matter what the zoom level is, (-1000,-1000) represents the top of the
+    // currently visible camera frame. The metering area cannot be set to be
+    // outside the current field of view, even when using zoom.
+    //
+    // No matter what metering areas are, the final exposure are compensated
+    // by KEY_EXPOSURE_COMPENSATION.
+    // Example value: "(-10,-10,0,0,300),(0,0,10,10,700)". Read/write.
+    static const char KEY_METERING_AREAS[];
+    // Current zoom value.
+    // Example value: "0" or "6". Read/write.
+    static const char KEY_ZOOM[];
+    // Maximum zoom value.
+    // Example value: "6". Read only.
+    static const char KEY_MAX_ZOOM[];
+    // The zoom ratios of all zoom values. The zoom ratio is in 1/100
+    // increments. Ex: a zoom of 3.2x is returned as 320. The number of list
+    // elements is KEY_MAX_ZOOM + 1. The first element is always 100. The last
+    // element is the zoom ratio of zoom value KEY_MAX_ZOOM.
+    // Example value: "100,150,200,250,300,350,400". Read only.
+    static const char KEY_ZOOM_RATIOS[];
+    // Whether zoom is supported. Zoom is supported if the value is "true". Zoom
+    // is not supported if the value is not "true" or the key does not exist.
+    // Example value: "true". Read only.
+    static const char KEY_ZOOM_SUPPORTED[];
+    // Whether if smooth zoom is supported. Smooth zoom is supported if the
+    // value is "true". It is not supported if the value is not "true" or the
+    // key does not exist.
+    // See CAMERA_CMD_START_SMOOTH_ZOOM, CAMERA_CMD_STOP_SMOOTH_ZOOM, and
+    // CAMERA_MSG_ZOOM in frameworks/base/include/camera/Camera.h.
+    // Example value: "true". Read only.
+    static const char KEY_SMOOTH_ZOOM_SUPPORTED[];
+
+    // The distances (in meters) from the camera to where an object appears to
+    // be in focus. The object is sharpest at the optimal focus distance. The
+    // depth of field is the far focus distance minus near focus distance.
+    //
+    // Focus distances may change after starting auto focus, canceling auto
+    // focus, or starting the preview. Applications can read this anytime to get
+    // the latest focus distances. If the focus mode is FOCUS_MODE_CONTINUOUS,
+    // focus distances may change from time to time.
+    //
+    // This is intended to estimate the distance between the camera and the
+    // subject. After autofocus, the subject distance may be within near and far
+    // focus distance. However, the precision depends on the camera hardware,
+    // autofocus algorithm, the focus area, and the scene. The error can be
+    // large and it should be only used as a reference.
+    //
+    // Far focus distance > optimal focus distance > near focus distance. If
+    // the far focus distance is infinity, the value should be "Infinity" (case
+    // sensitive). The format is three float values separated by commas. The
+    // first is near focus distance. The second is optimal focus distance. The
+    // third is far focus distance.
+    // Example value: "0.95,1.9,Infinity" or "0.049,0.05,0.051". Read only.
+    static const char KEY_FOCUS_DISTANCES[];
+
+    // The current dimensions in pixels (width x height) for video frames.
+    // The width and height must be one of the supported sizes retrieved
+    // via KEY_SUPPORTED_VIDEO_SIZES.
+    // Example value: "1280x720". Read/write.
+    static const char KEY_VIDEO_SIZE[];
+    // A list of the supported dimensions in pixels (width x height)
+    // for video frames. See CAMERA_MSG_VIDEO_FRAME for details in
+    // frameworks/base/include/camera/Camera.h.
+    // Example: "176x144,1280x720". Read only.
+    static const char KEY_SUPPORTED_VIDEO_SIZES[];
+
+    // The maximum number of detected faces supported by hardware face
+    // detection. If the value is 0, hardware face detection is not supported.
+    // Example: "5". Read only
+    static const char KEY_MAX_NUM_DETECTED_FACES_HW[];
+
+    // The maximum number of detected faces supported by software face
+    // detection. If the value is 0, software face detection is not supported.
+    // Example: "5". Read only
+    static const char KEY_MAX_NUM_DETECTED_FACES_SW[];
+
+    // Preferred preview frame size in pixels for video recording.
+    // The width and height must be one of the supported sizes retrieved
+    // via KEY_SUPPORTED_PREVIEW_SIZES. This key can be used only when
+    // getSupportedVideoSizes() does not return an empty Vector of Size.
+    // Camcorder applications are recommended to set the preview size
+    // to a value that is not larger than the preferred preview size.
+    // In other words, the product of the width and height of the
+    // preview size should not be larger than that of the preferred
+    // preview size. In addition, we recommend to choos a preview size
+    // that has the same aspect ratio as the resolution of video to be
+    // recorded.
+    // Example value: "800x600". Read only.
+    static const char KEY_PREFERRED_PREVIEW_SIZE_FOR_VIDEO[];
+
+    // The image format for video frames. See CAMERA_MSG_VIDEO_FRAME in
+    // frameworks/base/include/camera/Camera.h.
+    // Example value: "yuv420sp" or PIXEL_FORMAT_XXX constants. Read only.
+    static const char KEY_VIDEO_FRAME_FORMAT[];
+
+    // Sets the hint of the recording mode. If this is true, MediaRecorder.start
+    // may be faster or has less glitches. This should be called before starting
+    // the preview for the best result. But it is allowed to change the hint
+    // while the preview is active. The default value is false.
+    //
+    // The apps can still call Camera.takePicture when the hint is true. The
+    // apps can call MediaRecorder.start when the hint is false. But the
+    // performance may be worse.
+    // Example value: "true" or "false". Read/write.
+    static const char KEY_RECORDING_HINT[];
+
+    // Returns true if video snapshot is supported. That is, applications
+    // can call Camera.takePicture during recording. Applications do not need to
+    // call Camera.startPreview after taking a picture. The preview will be
+    // still active. Other than that, taking a picture during recording is
+    // identical to taking a picture normally. All settings and methods related
+    // to takePicture work identically. Ex: KEY_PICTURE_SIZE,
+    // KEY_SUPPORTED_PICTURE_SIZES, KEY_JPEG_QUALITY, KEY_ROTATION, and etc.
+    // The picture will have an EXIF header. FLASH_MODE_AUTO and FLASH_MODE_ON
+    // also still work, but the video will record the flash.
+    //
+    // Applications can set shutter callback as null to avoid the shutter
+    // sound. It is also recommended to set raw picture and post view callbacks
+    // to null to avoid the interrupt of preview display.
+    //
+    // Field-of-view of the recorded video may be different from that of the
+    // captured pictures.
+    // Example value: "true" or "false". Read only.
+    static const char KEY_VIDEO_SNAPSHOT_SUPPORTED[];
+
+    // The state of the video stabilization. If set to true, both the
+    // preview stream and the recorded video stream are stabilized by
+    // the camera. Only valid to set if KEY_VIDEO_STABILIZATION_SUPPORTED is
+    // set to true.
+    //
+    // The value of this key can be changed any time the camera is
+    // open. If preview or recording is active, it is acceptable for
+    // there to be a slight video glitch when video stabilization is
+    // toggled on and off.
+    //
+    // This only stabilizes video streams (between-frames stabilization), and
+    // has no effect on still image capture.
+    static const char KEY_VIDEO_STABILIZATION[];
+
+    // Returns true if video stabilization is supported. That is, applications
+    // can set KEY_VIDEO_STABILIZATION to true and have a stabilized preview
+    // stream and record stabilized videos.
+    static const char KEY_VIDEO_STABILIZATION_SUPPORTED[];
+
+    // Value for KEY_ZOOM_SUPPORTED or KEY_SMOOTH_ZOOM_SUPPORTED.
+    static const char TRUE[];
+    static const char FALSE[];
+
+    // Value for KEY_FOCUS_DISTANCES.
+    static const char FOCUS_DISTANCE_INFINITY[];
+
+    // Values for white balance settings.
+    static const char WHITE_BALANCE_AUTO[];
+    static const char WHITE_BALANCE_INCANDESCENT[];
+    static const char WHITE_BALANCE_FLUORESCENT[];
+    static const char WHITE_BALANCE_WARM_FLUORESCENT[];
+    static const char WHITE_BALANCE_DAYLIGHT[];
+    static const char WHITE_BALANCE_CLOUDY_DAYLIGHT[];
+    static const char WHITE_BALANCE_TWILIGHT[];
+    static const char WHITE_BALANCE_SHADE[];
+
+    // Values for effect settings.
+    static const char EFFECT_NONE[];
+    static const char EFFECT_MONO[];
+    static const char EFFECT_NEGATIVE[];
+    static const char EFFECT_SOLARIZE[];
+    static const char EFFECT_SEPIA[];
+    static const char EFFECT_POSTERIZE[];
+    static const char EFFECT_WHITEBOARD[];
+    static const char EFFECT_BLACKBOARD[];
+    static const char EFFECT_AQUA[];
+
+    // Values for antibanding settings.
+    static const char ANTIBANDING_AUTO[];
+    static const char ANTIBANDING_50HZ[];
+    static const char ANTIBANDING_60HZ[];
+    static const char ANTIBANDING_OFF[];
+
+    // Values for flash mode settings.
+    // Flash will not be fired.
+    static const char FLASH_MODE_OFF[];
+    // Flash will be fired automatically when required. The flash may be fired
+    // during preview, auto-focus, or snapshot depending on the driver.
+    static const char FLASH_MODE_AUTO[];
+    // Flash will always be fired during snapshot. The flash may also be
+    // fired during preview or auto-focus depending on the driver.
+    static const char FLASH_MODE_ON[];
+    // Flash will be fired in red-eye reduction mode.
+    static const char FLASH_MODE_RED_EYE[];
+    // Constant emission of light during preview, auto-focus and snapshot.
+    // This can also be used for video recording.
+    static const char FLASH_MODE_TORCH[];
+
+    // Values for scene mode settings.
+    static const char SCENE_MODE_AUTO[];
+    static const char SCENE_MODE_ACTION[];
+    static const char SCENE_MODE_PORTRAIT[];
+    static const char SCENE_MODE_LANDSCAPE[];
+    static const char SCENE_MODE_NIGHT[];
+    static const char SCENE_MODE_NIGHT_PORTRAIT[];
+    static const char SCENE_MODE_THEATRE[];
+    static const char SCENE_MODE_BEACH[];
+    static const char SCENE_MODE_SNOW[];
+    static const char SCENE_MODE_SUNSET[];
+    static const char SCENE_MODE_STEADYPHOTO[];
+    static const char SCENE_MODE_FIREWORKS[];
+    static const char SCENE_MODE_SPORTS[];
+    static const char SCENE_MODE_PARTY[];
+    static const char SCENE_MODE_CANDLELIGHT[];
+    // Applications are looking for a barcode. Camera driver will be optimized
+    // for barcode reading.
+    static const char SCENE_MODE_BARCODE[];
+
+    // Pixel color formats for KEY_PREVIEW_FORMAT, KEY_PICTURE_FORMAT,
+    // and KEY_VIDEO_FRAME_FORMAT
+    static const char PIXEL_FORMAT_YUV422SP[];
+    static const char PIXEL_FORMAT_YUV420SP[]; // NV21
+    static const char PIXEL_FORMAT_YUV422I[]; // YUY2
+    static const char PIXEL_FORMAT_YUV420P[]; // YV12
+    static const char PIXEL_FORMAT_RGB565[];
+    static const char PIXEL_FORMAT_RGBA8888[];
+    static const char PIXEL_FORMAT_JPEG[];
+    // Raw bayer format used for images, which is 10 bit precision samples
+    // stored in 16 bit words. The filter pattern is RGGB.
+    static const char PIXEL_FORMAT_BAYER_RGGB[];
+
+    // Values for focus mode settings.
+    // Auto-focus mode. Applications should call
+    // CameraHardwareInterface.autoFocus to start the focus in this mode.
+    static const char FOCUS_MODE_AUTO[];
+    // Focus is set at infinity. Applications should not call
+    // CameraHardwareInterface.autoFocus in this mode.
+    static const char FOCUS_MODE_INFINITY[];
+    // Macro (close-up) focus mode. Applications should call
+    // CameraHardwareInterface.autoFocus to start the focus in this mode.
+    static const char FOCUS_MODE_MACRO[];
+    // Focus is fixed. The camera is always in this mode if the focus is not
+    // adjustable. If the camera has auto-focus, this mode can fix the
+    // focus, which is usually at hyperfocal distance. Applications should
+    // not call CameraHardwareInterface.autoFocus in this mode.
+    static const char FOCUS_MODE_FIXED[];
+    // Extended depth of field (EDOF). Focusing is done digitally and
+    // continuously. Applications should not call
+    // CameraHardwareInterface.autoFocus in this mode.
+    static const char FOCUS_MODE_EDOF[];
+    // Continuous auto focus mode intended for video recording. The camera
+    // continuously tries to focus. This is the best choice for video
+    // recording because the focus changes smoothly . Applications still can
+    // call CameraHardwareInterface.takePicture in this mode but the subject may
+    // not be in focus. Auto focus starts when the parameter is set.
+    //
+    // Applications can call CameraHardwareInterface.autoFocus in this mode. The
+    // focus callback will immediately return with a boolean that indicates
+    // whether the focus is sharp or not. The focus position is locked after
+    // autoFocus call. If applications want to resume the continuous focus,
+    // cancelAutoFocus must be called. Restarting the preview will not resume
+    // the continuous autofocus. To stop continuous focus, applications should
+    // change the focus mode to other modes.
+    static const char FOCUS_MODE_CONTINUOUS_VIDEO[];
+    // Continuous auto focus mode intended for taking pictures. The camera
+    // continuously tries to focus. The speed of focus change is more aggressive
+    // than FOCUS_MODE_CONTINUOUS_VIDEO. Auto focus starts when the parameter is
+    // set.
+    //
+    // Applications can call CameraHardwareInterface.autoFocus in this mode. If
+    // the autofocus is in the middle of scanning, the focus callback will
+    // return when it completes. If the autofocus is not scanning, focus
+    // callback will immediately return with a boolean that indicates whether
+    // the focus is sharp or not. The apps can then decide if they want to take
+    // a picture immediately or to change the focus mode to auto, and run a full
+    // autofocus cycle. The focus position is locked after autoFocus call. If
+    // applications want to resume the continuous focus, cancelAutoFocus must be
+    // called. Restarting the preview will not resume the continuous autofocus.
+    // To stop continuous focus, applications should change the focus mode to
+    // other modes.
+    static const char FOCUS_MODE_CONTINUOUS_PICTURE[];
+
+private:
+    DefaultKeyedVector<String8,String8>    mMap;
+};
+
+}; // namespace android
+
+#endif
diff --git a/include/media/hardware/OMXPluginBase.h b/include/media/hardware/OMXPluginBase.h
index 2fd8e12..7bf4147 100644
--- a/include/media/hardware/OMXPluginBase.h
+++ b/include/media/hardware/OMXPluginBase.h
@@ -27,8 +27,6 @@
 
 namespace android {
 
-struct OMXComponentBase;
-
 struct OMXPluginBase {
     OMXPluginBase() {}
     virtual ~OMXPluginBase() {}
diff --git a/include/utils/AndroidThreads.h b/include/utils/AndroidThreads.h
index f9f7aa4..5bda0fd 100644
--- a/include/utils/AndroidThreads.h
+++ b/include/utils/AndroidThreads.h
@@ -73,6 +73,7 @@
 // Get pid for the current thread.
 extern pid_t androidGetTid();
 
+#ifdef HAVE_ANDROID_OS
 // Change the scheduling group of a particular thread.  The group
 // should be one of the ANDROID_TGROUP constants.  Returns BAD_VALUE if
 // grp is out of range, else another non-zero value with errno set if
@@ -95,6 +96,7 @@
 // scheduling groups are disabled.  Returns INVALID_OPERATION if unexpected error.
 // Thread ID zero means current thread.
 extern int androidGetThreadSchedulingGroup(pid_t tid);
+#endif
 
 #ifdef __cplusplus
 } // extern "C"
diff --git a/include/utils/BitSet.h b/include/utils/BitSet.h
index 9452e86..e189d0c 100644
--- a/include/utils/BitSet.h
+++ b/include/utils/BitSet.h
@@ -18,6 +18,7 @@
 #define UTILS_BITSET_H
 
 #include <stdint.h>
+#include <utils/TypeHelpers.h>
 
 /*
  * Contains some bit manipulation helpers.
@@ -102,6 +103,8 @@
     inline bool operator!= (const BitSet32& other) const { return value != other.value; }
 };
 
+ANDROID_BASIC_TYPES_TRAITS(BitSet32)
+
 } // namespace android
 
 #endif // UTILS_BITSET_H
diff --git a/include/utils/KeyedVector.h b/include/utils/KeyedVector.h
index 85535bd..20575ee 100644
--- a/include/utils/KeyedVector.h
+++ b/include/utils/KeyedVector.h
@@ -91,6 +91,13 @@
             SortedVector< key_value_pair_t<KEY, VALUE> >    mVector;
 };
 
+// KeyedVector<KEY, VALUE> can be trivially moved using memcpy() because its
+// underlying SortedVector can be trivially moved.
+template<typename KEY, typename VALUE> struct trait_trivial_move<KeyedVector<KEY, VALUE> > {
+    enum { value = trait_trivial_move<SortedVector< key_value_pair_t<KEY, VALUE> > >::value };
+};
+
+
 // ---------------------------------------------------------------------------
 
 /**
diff --git a/include/utils/RefBase.h b/include/utils/RefBase.h
index c7a9b78..99f5182 100644
--- a/include/utils/RefBase.h
+++ b/include/utils/RefBase.h
@@ -25,6 +25,7 @@
 #include <string.h>
 
 #include <utils/StrongPointer.h>
+#include <utils/TypeHelpers.h>
 
 // ---------------------------------------------------------------------------
 namespace android {
diff --git a/include/utils/SortedVector.h b/include/utils/SortedVector.h
index 0e98aeb..2445525 100644
--- a/include/utils/SortedVector.h
+++ b/include/utils/SortedVector.h
@@ -133,6 +133,9 @@
     virtual int     do_compare(const void* lhs, const void* rhs) const;
 };
 
+// SortedVector<T> can be trivially moved using memcpy() because moving does not
+// require any change to the underlying SharedBuffer contents or reference count.
+template<typename T> struct trait_trivial_move<SortedVector<T> > { enum { value = true }; };
 
 // ---------------------------------------------------------------------------
 // No user serviceable parts from here...
diff --git a/include/utils/String16.h b/include/utils/String16.h
index 360f407..fe06c57 100644
--- a/include/utils/String16.h
+++ b/include/utils/String16.h
@@ -20,6 +20,7 @@
 #include <utils/Errors.h>
 #include <utils/SharedBuffer.h>
 #include <utils/Unicode.h>
+#include <utils/TypeHelpers.h>
 
 // ---------------------------------------------------------------------------
 
@@ -112,6 +113,10 @@
             const char16_t*     mString;
 };
 
+// String16 can be trivially moved using memcpy() because moving does not
+// require any change to the underlying SharedBuffer contents or reference count.
+ANDROID_TRIVIAL_MOVE_TRAIT(String16)
+
 TextOutput& operator<<(TextOutput& to, const String16& val);
 
 // ---------------------------------------------------------------------------
diff --git a/include/utils/String8.h b/include/utils/String8.h
index 4163697..335e7f1 100644
--- a/include/utils/String8.h
+++ b/include/utils/String8.h
@@ -20,6 +20,7 @@
 #include <utils/Errors.h>
 #include <utils/SharedBuffer.h>
 #include <utils/Unicode.h>
+#include <utils/TypeHelpers.h>
 
 #include <string.h> // for strcmp
 #include <stdarg.h>
@@ -219,6 +220,10 @@
             const char* mString;
 };
 
+// String8 can be trivially moved using memcpy() because moving does not
+// require any change to the underlying SharedBuffer contents or reference count.
+ANDROID_TRIVIAL_MOVE_TRAIT(String8)
+
 TextOutput& operator<<(TextOutput& to, const String16& val);
 
 // ---------------------------------------------------------------------------
diff --git a/include/utils/TypeHelpers.h b/include/utils/TypeHelpers.h
index 1f2c2d5..2bf33c3 100644
--- a/include/utils/TypeHelpers.h
+++ b/include/utils/TypeHelpers.h
@@ -68,12 +68,24 @@
     };
 };
 
-#define ANDROID_BASIC_TYPES_TRAITS( T )                                     \
-    template<> struct trait_trivial_ctor< T >   { enum { value = true }; }; \
-    template<> struct trait_trivial_dtor< T >   { enum { value = true }; }; \
-    template<> struct trait_trivial_copy< T >   { enum { value = true }; }; \
+#define ANDROID_TRIVIAL_CTOR_TRAIT( T ) \
+    template<> struct trait_trivial_ctor< T >   { enum { value = true }; };
+
+#define ANDROID_TRIVIAL_DTOR_TRAIT( T ) \
+    template<> struct trait_trivial_dtor< T >   { enum { value = true }; };
+
+#define ANDROID_TRIVIAL_COPY_TRAIT( T ) \
+    template<> struct trait_trivial_copy< T >   { enum { value = true }; };
+
+#define ANDROID_TRIVIAL_MOVE_TRAIT( T ) \
     template<> struct trait_trivial_move< T >   { enum { value = true }; };
 
+#define ANDROID_BASIC_TYPES_TRAITS( T ) \
+    ANDROID_TRIVIAL_CTOR_TRAIT( T ) \
+    ANDROID_TRIVIAL_DTOR_TRAIT( T ) \
+    ANDROID_TRIVIAL_COPY_TRAIT( T ) \
+    ANDROID_TRIVIAL_MOVE_TRAIT( T )
+
 // ---------------------------------------------------------------------------
 
 /*
diff --git a/include/utils/Vector.h b/include/utils/Vector.h
index 5b5296b..e39a5b7 100644
--- a/include/utils/Vector.h
+++ b/include/utils/Vector.h
@@ -201,6 +201,9 @@
     virtual void    do_move_backward(void* dest, const void* from, size_t num) const;
 };
 
+// Vector<T> can be trivially moved using memcpy() because moving does not
+// require any change to the underlying SharedBuffer contents or reference count.
+template<typename T> struct trait_trivial_move<Vector<T> > { enum { value = true }; };
 
 // ---------------------------------------------------------------------------
 // No user serviceable parts from here...
diff --git a/include/utils/WorkQueue.h b/include/utils/WorkQueue.h
new file mode 100644
index 0000000..e3c75b2
--- /dev/null
+++ b/include/utils/WorkQueue.h
@@ -0,0 +1,119 @@
+/*]
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _LIBS_UTILS_WORK_QUEUE_H
+#define _LIBS_UTILS_WORK_QUEUE_H
+
+#include <utils/Errors.h>
+#include <utils/Vector.h>
+#include <utils/threads.h>
+
+namespace android {
+
+/*
+ * A threaded work queue.
+ *
+ * This class is designed to make it easy to run a bunch of isolated work
+ * units in parallel, using up to the specified number of threads.
+ * To use it, write a loop to post work units to the work queue, then synchronize
+ * on the queue at the end.
+ */
+class WorkQueue {
+public:
+    class WorkUnit {
+    public:
+        WorkUnit() { }
+        virtual ~WorkUnit() { }
+
+        /*
+         * Runs the work unit.
+         * If the result is 'true' then the work queue continues scheduling work as usual.
+         * If the result is 'false' then the work queue is canceled.
+         */
+        virtual bool run() = 0;
+    };
+
+    /* Creates a work queue with the specified maximum number of work threads. */
+    WorkQueue(size_t maxThreads, bool canCallJava = true);
+
+    /* Destroys the work queue.
+     * Cancels pending work and waits for all remaining threads to complete.
+     */
+    ~WorkQueue();
+
+    /* Posts a work unit to run later.
+     * If the work queue has been canceled or is already finished, returns INVALID_OPERATION
+     * and does not take ownership of the work unit (caller must destroy it itself).
+     * Otherwise, returns OK and takes ownership of the work unit (the work queue will
+     * destroy it automatically).
+     *
+     * For flow control, this method blocks when the size of the pending work queue is more
+     * 'backlog' times the number of threads.  This condition reduces the rate of entry into
+     * the pending work queue and prevents it from growing much more rapidly than the
+     * work threads can actually handle.
+     *
+     * If 'backlog' is 0, then no throttle is applied.
+     */
+    status_t schedule(WorkUnit* workUnit, size_t backlog = 2);
+
+    /* Cancels all pending work.
+     * If the work queue is already finished, returns INVALID_OPERATION.
+     * If the work queue is already canceled, returns OK and does nothing else.
+     * Otherwise, returns OK, discards all pending work units and prevents additional
+     * work units from being scheduled.
+     *
+     * Call finish() after cancel() to wait for all remaining work to complete.
+     */
+    status_t cancel();
+
+    /* Waits for all work to complete.
+     * If the work queue is already finished, returns INVALID_OPERATION.
+     * Otherwise, waits for all work to complete and returns OK.
+     */
+    status_t finish();
+
+private:
+    class WorkThread : public Thread {
+    public:
+        WorkThread(WorkQueue* workQueue, bool canCallJava);
+        virtual ~WorkThread();
+
+    private:
+        virtual bool threadLoop();
+
+        WorkQueue* const mWorkQueue;
+    };
+
+    status_t cancelLocked();
+    bool threadLoop(); // called from each work thread
+
+    const size_t mMaxThreads;
+    const bool mCanCallJava;
+
+    Mutex mLock;
+    Condition mWorkChangedCondition;
+    Condition mWorkDequeuedCondition;
+
+    bool mCanceled;
+    bool mFinished;
+    size_t mIdleThreads;
+    Vector<sp<WorkThread> > mWorkThreads;
+    Vector<WorkUnit*> mWorkUnits;
+};
+
+}; // namespace android
+
+#endif // _LIBS_UTILS_WORK_QUEUE_H
diff --git a/libs/utils/Android.mk b/libs/utils/Android.mk
index 87d0fb2..b4fc994 100644
--- a/libs/utils/Android.mk
+++ b/libs/utils/Android.mk
@@ -41,6 +41,7 @@
 	Tokenizer.cpp \
 	Unicode.cpp \
 	VectorImpl.cpp \
+	WorkQueue.cpp \
 	misc.cpp
 
 host_commonCflags := -DLIBUTILS_NATIVE=1 $(TOOL_CFLAGS)
diff --git a/libs/utils/Threads.cpp b/libs/utils/Threads.cpp
index ab207f5..f9277de 100644
--- a/libs/utils/Threads.cpp
+++ b/libs/utils/Threads.cpp
@@ -323,6 +323,7 @@
 #endif
 }
 
+#ifdef HAVE_ANDROID_OS
 int androidSetThreadSchedulingGroup(pid_t tid, int grp)
 {
     if (grp > ANDROID_TGROUP_MAX || grp < 0) { 
@@ -425,6 +426,7 @@
 
     return ret;
 }
+#endif
 
 namespace android {
 
diff --git a/libs/utils/WorkQueue.cpp b/libs/utils/WorkQueue.cpp
new file mode 100644
index 0000000..3bb99a1
--- /dev/null
+++ b/libs/utils/WorkQueue.cpp
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// #define LOG_NDEBUG 0
+#define LOG_TAG "WorkQueue"
+
+#include <utils/Log.h>
+#include <utils/WorkQueue.h>
+
+namespace android {
+
+// --- WorkQueue ---
+
+WorkQueue::WorkQueue(size_t maxThreads, bool canCallJava) :
+        mMaxThreads(maxThreads), mCanCallJava(canCallJava),
+        mCanceled(false), mFinished(false), mIdleThreads(0) {
+}
+
+WorkQueue::~WorkQueue() {
+    if (!cancel()) {
+        finish();
+    }
+}
+
+status_t WorkQueue::schedule(WorkUnit* workUnit, size_t backlog) {
+    AutoMutex _l(mLock);
+
+    if (mFinished || mCanceled) {
+        return INVALID_OPERATION;
+    }
+
+    if (mWorkThreads.size() < mMaxThreads
+            && mIdleThreads < mWorkUnits.size() + 1) {
+        sp<WorkThread> workThread = new WorkThread(this, mCanCallJava);
+        status_t status = workThread->run("WorkQueue::WorkThread");
+        if (status) {
+            return status;
+        }
+        mWorkThreads.add(workThread);
+        mIdleThreads += 1;
+    } else if (backlog) {
+        while (mWorkUnits.size() >= mMaxThreads * backlog) {
+            mWorkDequeuedCondition.wait(mLock);
+            if (mFinished || mCanceled) {
+                return INVALID_OPERATION;
+            }
+        }
+    }
+
+    mWorkUnits.add(workUnit);
+    mWorkChangedCondition.broadcast();
+    return OK;
+}
+
+status_t WorkQueue::cancel() {
+    AutoMutex _l(mLock);
+
+    return cancelLocked();
+}
+
+status_t WorkQueue::cancelLocked() {
+    if (mFinished) {
+        return INVALID_OPERATION;
+    }
+
+    if (!mCanceled) {
+        mCanceled = true;
+
+        size_t count = mWorkUnits.size();
+        for (size_t i = 0; i < count; i++) {
+            delete mWorkUnits.itemAt(i);
+        }
+        mWorkUnits.clear();
+        mWorkChangedCondition.broadcast();
+        mWorkDequeuedCondition.broadcast();
+    }
+    return OK;
+}
+
+status_t WorkQueue::finish() {
+    { // acquire lock
+        AutoMutex _l(mLock);
+
+        if (mFinished) {
+            return INVALID_OPERATION;
+        }
+
+        mFinished = true;
+        mWorkChangedCondition.broadcast();
+    } // release lock
+
+    // It is not possible for the list of work threads to change once the mFinished
+    // flag has been set, so we can access mWorkThreads outside of the lock here.
+    size_t count = mWorkThreads.size();
+    for (size_t i = 0; i < count; i++) {
+        mWorkThreads.itemAt(i)->join();
+    }
+    mWorkThreads.clear();
+    return OK;
+}
+
+bool WorkQueue::threadLoop() {
+    WorkUnit* workUnit;
+    { // acquire lock
+        AutoMutex _l(mLock);
+
+        for (;;) {
+            if (mCanceled) {
+                return false;
+            }
+
+            if (!mWorkUnits.isEmpty()) {
+                workUnit = mWorkUnits.itemAt(0);
+                mWorkUnits.removeAt(0);
+                mIdleThreads -= 1;
+                mWorkDequeuedCondition.broadcast();
+                break;
+            }
+
+            if (mFinished) {
+                return false;
+            }
+
+            mWorkChangedCondition.wait(mLock);
+        }
+    } // release lock
+
+    bool shouldContinue = workUnit->run();
+    delete workUnit;
+
+    { // acquire lock
+        AutoMutex _l(mLock);
+
+        mIdleThreads += 1;
+
+        if (!shouldContinue) {
+            cancelLocked();
+            return false;
+        }
+    } // release lock
+
+    return true;
+}
+
+// --- WorkQueue::WorkThread ---
+
+WorkQueue::WorkThread::WorkThread(WorkQueue* workQueue, bool canCallJava) :
+        Thread(canCallJava), mWorkQueue(workQueue) {
+}
+
+WorkQueue::WorkThread::~WorkThread() {
+}
+
+bool WorkQueue::WorkThread::threadLoop() {
+    return mWorkQueue->threadLoop();
+}
+
+};  // namespace android
diff --git a/opengl/libs/GLES_trace/src/gltrace_transport.cpp b/opengl/libs/GLES_trace/src/gltrace_transport.cpp
index 5251b12..5c73456 100644
--- a/opengl/libs/GLES_trace/src/gltrace_transport.cpp
+++ b/opengl/libs/GLES_trace/src/gltrace_transport.cpp
@@ -23,6 +23,7 @@
 #include <netinet/in.h>
 
 #include <cutils/log.h>
+#include <private/android_filesystem_config.h>
 
 #include "gltrace_transport.h"
 
@@ -67,6 +68,19 @@
         return -1;
     }
 
+    struct ucred cr;
+    socklen_t cr_len = sizeof(cr);
+    if (getsockopt(clientSocket, SOL_SOCKET, SO_PEERCRED, &cr, &cr_len) != 0) {
+        ALOGE("Error obtaining credentials of peer");
+        return -1;
+    }
+
+    // Only accept connects from the shell (adb forward comes to us as shell user)
+    if (cr.uid != AID_SHELL) {
+        ALOGE("Unknown peer type (%d), expected shell to be the peer", cr.uid);
+        return -1;
+    }
+
     ALOGD("gltrace::waitForClientConnection: client connected.");
 
     // do not accept any more incoming connections