diff --git a/bluetooth/1.0/default/Android.bp b/bluetooth/1.0/default/Android.bp
new file mode 100644
index 0000000..4c7017c
--- /dev/null
+++ b/bluetooth/1.0/default/Android.bp
@@ -0,0 +1,36 @@
+//
+// Copyright (C) 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+cc_library_shared {
+    name: "android.hardware.bluetooth@1.0-impl",
+    relative_install_path: "hw",
+    srcs: [
+        "async_fd_watcher.cc",
+        "bluetooth_hci.cc",
+        "vendor_interface.cc",
+    ],
+    shared_libs: [
+        "liblog",
+        "libcutils",
+        "libhardware",
+        "libhwbinder",
+        "libbase",
+        "libcutils",
+        "libutils",
+        "libhidlbase",
+        "libhidltransport",
+        "android.hardware.bluetooth@1.0",
+    ],
+}
diff --git a/bluetooth/1.0/default/Android.mk b/bluetooth/1.0/default/Android.mk
new file mode 100644
index 0000000..08bfb4e
--- /dev/null
+++ b/bluetooth/1.0/default/Android.mk
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2016 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE_RELATIVE_PATH := hw
+LOCAL_MODULE := android.hardware.bluetooth@1.0-service
+LOCAL_INIT_RC := android.hardware.bluetooth@1.0-service.rc
+LOCAL_SRC_FILES := \
+  service.cpp
+
+LOCAL_SHARED_LIBRARIES := \
+  liblog \
+  libcutils \
+  libdl \
+  libbase \
+  libutils \
+  libhardware_legacy \
+  libhardware \
+
+LOCAL_SHARED_LIBRARIES += \
+  libhwbinder \
+  libhidlbase \
+  libhidltransport \
+  android.hardware.bluetooth@1.0 \
+
+include $(BUILD_EXECUTABLE)
diff --git a/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc b/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc
new file mode 100644
index 0000000..8c5c02a
--- /dev/null
+++ b/bluetooth/1.0/default/android.hardware.bluetooth@1.0-service.rc
@@ -0,0 +1,4 @@
+service bluetooth-1-0 /system/bin/hw/android.hardware.bluetooth@1.0-service
+    class hal
+    user bluetooth
+    group bluetooth
diff --git a/bluetooth/1.0/default/async_fd_watcher.cc b/bluetooth/1.0/default/async_fd_watcher.cc
new file mode 100644
index 0000000..636b4b6
--- /dev/null
+++ b/bluetooth/1.0/default/async_fd_watcher.cc
@@ -0,0 +1,133 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#include "async_fd_watcher.h"
+
+#include <algorithm>
+#include <atomic>
+#include <condition_variable>
+#include <mutex>
+#include <thread>
+#include <vector>
+#include "fcntl.h"
+#include "sys/select.h"
+#include "unistd.h"
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace implementation {
+
+int AsyncFdWatcher::WatchFdForNonBlockingReads(
+    int file_descriptor, const ReadCallback& on_read_fd_ready_callback) {
+  // Add file descriptor and callback
+  {
+    std::unique_lock<std::mutex> guard(internal_mutex_);
+    read_fd_ = file_descriptor;
+    cb_ = on_read_fd_ready_callback;
+  }
+
+  // Start the thread if not started yet
+  int started = tryStartThread();
+  if (started != 0) {
+    return started;
+  }
+
+  return 0;
+}
+
+void AsyncFdWatcher::StopWatchingFileDescriptor() { stopThread(); }
+
+AsyncFdWatcher::~AsyncFdWatcher() {}
+
+// Make sure to call this with at least one file descriptor ready to be
+// watched upon or the thread routine will return immediately
+int AsyncFdWatcher::tryStartThread() {
+  if (std::atomic_exchange(&running_, true)) return 0;
+
+  // Set up the communication channel
+  int pipe_fds[2];
+  if (pipe2(pipe_fds, O_NONBLOCK)) return -1;
+
+  notification_listen_fd_ = pipe_fds[0];
+  notification_write_fd_ = pipe_fds[1];
+
+  thread_ = std::thread([this]() { ThreadRoutine(); });
+  if (!thread_.joinable()) return -1;
+
+  return 0;
+}
+
+int AsyncFdWatcher::stopThread() {
+  if (!std::atomic_exchange(&running_, false)) return 0;
+
+  notifyThread();
+  if (std::this_thread::get_id() != thread_.get_id()) {
+    thread_.join();
+  }
+
+  {
+    std::unique_lock<std::mutex> guard(internal_mutex_);
+    cb_ = nullptr;
+    read_fd_ = -1;
+  }
+
+  return 0;
+}
+
+int AsyncFdWatcher::notifyThread() {
+  uint8_t buffer[] = {0};
+  if (TEMP_FAILURE_RETRY(write(notification_write_fd_, &buffer, 1)) < 0) {
+    return -1;
+  }
+  return 0;
+}
+
+void AsyncFdWatcher::ThreadRoutine() {
+  while (running_) {
+    fd_set read_fds;
+    FD_ZERO(&read_fds);
+    FD_SET(notification_listen_fd_, &read_fds);
+    FD_SET(read_fd_, &read_fds);
+
+    // Wait until there is data available to read on some FD
+    int nfds = std::max(notification_listen_fd_, read_fd_);
+    int retval = select(nfds + 1, &read_fds, NULL, NULL, NULL);
+    if (retval <= 0) continue;  // there was some error or a timeout
+
+    // Read data from the notification FD
+    if (FD_ISSET(notification_listen_fd_, &read_fds)) {
+      char buffer[] = {0};
+      TEMP_FAILURE_RETRY(read(notification_listen_fd_, buffer, 1));
+    }
+
+    // Make sure we're still running
+    if (!running_) break;
+
+    // Invoke the data ready callback if appropriate
+    if (FD_ISSET(read_fd_, &read_fds)) {
+      std::unique_lock<std::mutex> guard(internal_mutex_);
+      if (cb_) cb_(read_fd_);
+    }
+  }
+}
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace bluetooth
+} // namespace hardware
+} // namespace android
diff --git a/bluetooth/1.0/default/async_fd_watcher.h b/bluetooth/1.0/default/async_fd_watcher.h
new file mode 100644
index 0000000..1e4da8c
--- /dev/null
+++ b/bluetooth/1.0/default/async_fd_watcher.h
@@ -0,0 +1,63 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#pragma once
+
+#include <mutex>
+#include <thread>
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace implementation {
+
+using ReadCallback = std::function<void(int)>;
+
+class AsyncFdWatcher {
+ public:
+  AsyncFdWatcher() = default;
+  ~AsyncFdWatcher();
+
+  int WatchFdForNonBlockingReads(int file_descriptor,
+                                 const ReadCallback& on_read_fd_ready_callback);
+  void StopWatchingFileDescriptor();
+
+ private:
+  AsyncFdWatcher(const AsyncFdWatcher&) = delete;
+  AsyncFdWatcher& operator=(const AsyncFdWatcher&) = delete;
+
+  int tryStartThread();
+  int stopThread();
+  int notifyThread();
+  void ThreadRoutine();
+
+  std::atomic_bool running_{false};
+  std::thread thread_;
+  std::mutex internal_mutex_;
+
+  int read_fd_;
+  int notification_listen_fd_;
+  int notification_write_fd_;
+  ReadCallback cb_;
+};
+
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace bluetooth
+} // namespace hardware
+} // namespace android
diff --git a/bluetooth/1.0/default/bluetooth_hci.cc b/bluetooth/1.0/default/bluetooth_hci.cc
new file mode 100644
index 0000000..d12bfb9
--- /dev/null
+++ b/bluetooth/1.0/default/bluetooth_hci.cc
@@ -0,0 +1,95 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#define LOG_TAG "android.hardware.bluetooth@1.0-impl"
+#include <utils/Log.h>
+
+#include "bluetooth_hci.h"
+#include "vendor_interface.h"
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace implementation {
+
+static const uint8_t HCI_DATA_TYPE_COMMAND = 1;
+static const uint8_t HCI_DATA_TYPE_ACL = 2;
+static const uint8_t HCI_DATA_TYPE_SCO = 3;
+
+Return<Status> BluetoothHci::initialize(
+    const ::android::sp<IBluetoothHciCallbacks>& cb) {
+  ALOGW("BluetoothHci::initialize()");
+  event_cb_ = cb;
+
+  bool rc = VendorInterface::Initialize(
+      [this](HciPacketType type, const hidl_vec<uint8_t>& packet) {
+        switch (type) {
+          case HCI_PACKET_TYPE_EVENT:
+            event_cb_->hciEventReceived(packet);
+            break;
+          case HCI_PACKET_TYPE_ACL_DATA:
+            event_cb_->aclDataReceived(packet);
+            break;
+          case HCI_PACKET_TYPE_SCO_DATA:
+            event_cb_->scoDataReceived(packet);
+            break;
+          default:
+            ALOGE("%s Unexpected event type %d", __func__, type);
+            break;
+        }
+      });
+  if (!rc) return Status::INITIALIZATION_ERROR;
+
+  return Status::SUCCESS;
+}
+
+Return<void> BluetoothHci::close() {
+  ALOGW("BluetoothHci::close()");
+  VendorInterface::Shutdown();
+  return Void();
+}
+
+Return<void> BluetoothHci::sendHciCommand(const hidl_vec<uint8_t>& command) {
+  sendDataToController(HCI_DATA_TYPE_COMMAND, command);
+  return Void();
+}
+
+Return<void> BluetoothHci::sendAclData(const hidl_vec<uint8_t>& data) {
+  sendDataToController(HCI_DATA_TYPE_ACL, data);
+  return Void();
+}
+
+Return<void> BluetoothHci::sendScoData(const hidl_vec<uint8_t>& data) {
+  sendDataToController(HCI_DATA_TYPE_SCO, data);
+  return Void();
+}
+
+void BluetoothHci::sendDataToController(const uint8_t type,
+                                        const hidl_vec<uint8_t>& data) {
+  VendorInterface::get()->Send(&type, 1);
+  VendorInterface::get()->Send(data.data(), data.size());
+}
+
+IBluetoothHci* HIDL_FETCH_IBluetoothHci(const char* /* name */) {
+  return new BluetoothHci();
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
diff --git a/bluetooth/1.0/default/bluetooth_hci.h b/bluetooth/1.0/default/bluetooth_hci.h
new file mode 100644
index 0000000..d297570
--- /dev/null
+++ b/bluetooth/1.0/default/bluetooth_hci.h
@@ -0,0 +1,55 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#ifndef HIDL_GENERATED_android_hardware_bluetooth_V1_0_BluetoothHci_H_
+#define HIDL_GENERATED_android_hardware_bluetooth_V1_0_BluetoothHci_H_
+
+#include <android/hardware/bluetooth/1.0/IBluetoothHci.h>
+
+#include <hidl/MQDescriptor.h>
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::Return;
+using ::android::hardware::hidl_vec;
+
+class BluetoothHci : public IBluetoothHci {
+ public:
+  Return<Status> initialize(
+      const ::android::sp<IBluetoothHciCallbacks>& cb) override;
+  Return<void> sendHciCommand(const hidl_vec<uint8_t>& packet) override;
+  Return<void> sendAclData(const hidl_vec<uint8_t>& data) override;
+  Return<void> sendScoData(const hidl_vec<uint8_t>& data) override;
+  Return<void> close() override;
+
+ private:
+  void sendDataToController(const uint8_t type, const hidl_vec<uint8_t>& data);
+  ::android::sp<IBluetoothHciCallbacks> event_cb_;
+};
+
+extern "C" IBluetoothHci* HIDL_FETCH_IBluetoothHci(const char* name);
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
+
+#endif  // HIDL_GENERATED_android_hardware_bluetooth_V1_0_BluetoothHci_H_
diff --git a/bluetooth/1.0/default/bt_vendor_lib.h b/bluetooth/1.0/default/bt_vendor_lib.h
new file mode 100644
index 0000000..c140e52
--- /dev/null
+++ b/bluetooth/1.0/default/bt_vendor_lib.h
@@ -0,0 +1,435 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BT_VENDOR_LIB_H
+#define BT_VENDOR_LIB_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Struct types */
+
+/** Typedefs and defines */
+
+/** Vendor specific operations OPCODE */
+typedef enum {
+  /*  [operation]
+   *      Power on or off the BT Controller.
+   *  [input param]
+   *      A pointer to int type with content of bt_vendor_power_state_t.
+   *      Typecasting conversion: (int *) param.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      None.
+   */
+  BT_VND_OP_POWER_CTRL,
+
+  /*  [operation]
+   *      Perform any vendor specific initialization or configuration
+   *      on the BT Controller. This is called before stack initialization.
+   *  [input param]
+   *      None.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      Must call fwcfg_cb to notify the stack of the completion of vendor
+   *      specific initialization once it has been done.
+   */
+  BT_VND_OP_FW_CFG,
+
+  /*  [operation]
+   *      Perform any vendor specific SCO/PCM configuration on the BT
+   * Controller.
+   *      This is called after stack initialization.
+   *  [input param]
+   *      None.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      Must call scocfg_cb to notify the stack of the completion of vendor
+   *      specific SCO configuration once it has been done.
+   */
+  BT_VND_OP_SCO_CFG,
+
+  /*  [operation]
+   *      Open UART port on where the BT Controller is attached.
+   *      This is called before stack initialization.
+   *  [input param]
+   *      A pointer to int array type for open file descriptors.
+   *      The mapping of HCI channel to fd slot in the int array is given in
+   *      bt_vendor_hci_channels_t.
+   *      And, it requires the vendor lib to fill up the content before
+   * returning
+   *      the call.
+   *      Typecasting conversion: (int (*)[]) param.
+   *  [return]
+   *      Numbers of opened file descriptors.
+   *      Valid number:
+   *          1 - CMD/EVT/ACL-In/ACL-Out via the same fd (e.g. UART)
+   *          2 - CMD/EVT on one fd, and ACL-In/ACL-Out on the other fd
+   *          4 - CMD, EVT, ACL-In, ACL-Out are on their individual fd
+   *  [callback]
+   *      None.
+   */
+  BT_VND_OP_USERIAL_OPEN,
+
+  /*  [operation]
+   *      Close the previously opened UART port.
+   *  [input param]
+   *      None.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      None.
+   */
+  BT_VND_OP_USERIAL_CLOSE,
+
+  /*  [operation]
+   *      Get the LPM idle timeout in milliseconds.
+   *      The stack uses this information to launch a timer delay before it
+   *      attempts to de-assert LPM WAKE signal once downstream HCI packet
+   *      has been delivered.
+   *  [input param]
+   *      A pointer to uint32_t type which is passed in by the stack. And, it
+   *      requires the vendor lib to fill up the content before returning
+   *      the call.
+   *      Typecasting conversion: (uint32_t *) param.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      None.
+   */
+  BT_VND_OP_GET_LPM_IDLE_TIMEOUT,
+
+  /*  [operation]
+   *      Enable or disable LPM mode on BT Controller.
+   *  [input param]
+   *      A pointer to uint8_t type with content of bt_vendor_lpm_mode_t.
+   *      Typecasting conversion: (uint8_t *) param.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      Must call lpm_cb to notify the stack of the completion of LPM
+   *      disable/enable process once it has been done.
+   */
+  BT_VND_OP_LPM_SET_MODE,
+
+  /*  [operation]
+   *      Assert or Deassert LPM WAKE on BT Controller.
+   *  [input param]
+   *      A pointer to uint8_t type with content of bt_vendor_lpm_wake_state_t.
+   *      Typecasting conversion: (uint8_t *) param.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      None.
+   */
+  BT_VND_OP_LPM_WAKE_SET_STATE,
+
+  /*  [operation]
+   *      Perform any vendor specific commands related to audio state changes.
+   *  [input param]
+   *      a pointer to bt_vendor_op_audio_state_t indicating what audio state is
+   *      set.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      None.
+   */
+  BT_VND_OP_SET_AUDIO_STATE,
+
+  /*  [operation]
+   *      The epilog call to the vendor module so that it can perform any
+   *      vendor-specific processes (e.g. send a HCI_RESET to BT Controller)
+   *      before the caller calls for cleanup().
+   *  [input param]
+   *      None.
+   *  [return]
+   *      0 - default, don't care.
+   *  [callback]
+   *      Must call epilog_cb to notify the stack of the completion of vendor
+   *      specific epilog process once it has been done.
+   */
+  BT_VND_OP_EPILOG,
+
+  /*  [operation]
+   *      Call to the vendor module so that it can perform all vendor-specific
+   *      operations to start offloading a2dp media encode & tx.
+   *  [input param]
+   *      pointer to bt_vendor_op_a2dp_offload_start_t containing elements
+   *      required for VND FW to setup a2dp offload.
+   *  [return]
+   *      0  - default, dont care.
+   *  [callback]
+   *      Must call a2dp_offload_start_cb to notify the stack of the
+   *      completion of vendor specific setup process once it has been done.
+   */
+  BT_VND_OP_A2DP_OFFLOAD_START,
+
+  /*  [operation]
+   *      Call to the vendor module so that it can perform all vendor-specific
+   *      operations to suspend offloading a2dp media encode & tx.
+   *  [input param]
+   *      pointer to bt_vendor_op_a2dp_offload_t containing elements
+   *      required for VND FW to setup a2dp offload.
+   *  [return]
+   *      0  - default, dont care.
+   *  [callback]
+   *      Must call a2dp_offload_cb to notify the stack of the
+   *      completion of vendor specific setup process once it has been done.
+   */
+  BT_VND_OP_A2DP_OFFLOAD_STOP,
+
+} bt_vendor_opcode_t;
+
+/** Power on/off control states */
+typedef enum {
+  BT_VND_PWR_OFF,
+  BT_VND_PWR_ON,
+} bt_vendor_power_state_t;
+
+/** Define HCI channel identifier in the file descriptors array
+    used in BT_VND_OP_USERIAL_OPEN operation.
+ */
+typedef enum {
+  CH_CMD,      // HCI Command channel
+  CH_EVT,      // HCI Event channel
+  CH_ACL_OUT,  // HCI ACL downstream channel
+  CH_ACL_IN,   // HCI ACL upstream channel
+
+  CH_MAX  // Total channels
+} bt_vendor_hci_channels_t;
+
+/** LPM disable/enable request */
+typedef enum {
+  BT_VND_LPM_DISABLE,
+  BT_VND_LPM_ENABLE,
+} bt_vendor_lpm_mode_t;
+
+/** LPM WAKE set state request */
+typedef enum {
+  BT_VND_LPM_WAKE_ASSERT,
+  BT_VND_LPM_WAKE_DEASSERT,
+} bt_vendor_lpm_wake_state_t;
+
+/** Callback result values */
+typedef enum {
+  BT_VND_OP_RESULT_SUCCESS,
+  BT_VND_OP_RESULT_FAIL,
+} bt_vendor_op_result_t;
+
+/** audio (SCO) state changes triggering VS commands for configuration */
+typedef struct {
+  uint16_t handle;
+  uint16_t peer_codec;
+  uint16_t state;
+} bt_vendor_op_audio_state_t;
+
+/*
+ * Bluetooth Host/Controller Vendor callback structure.
+ */
+
+/* vendor initialization/configuration callback */
+typedef void (*cfg_result_cb)(bt_vendor_op_result_t result);
+
+/* datapath buffer allocation callback (callout)
+ *
+ *  Vendor lib needs to request a buffer through the alloc callout function
+ *  from HCI lib if the buffer is for constructing a HCI Command packet which
+ *  will be sent through xmit_cb to BT Controller.
+ *
+ *  For each buffer allocation, the requested size needs to be big enough to
+ *  accommodate the below header plus a complete HCI packet --
+ *      typedef struct
+ *      {
+ *          uint16_t          event;
+ *          uint16_t          len;
+ *          uint16_t          offset;
+ *          uint16_t          layer_specific;
+ *      } HC_BT_HDR;
+ *
+ *  HCI lib returns a pointer to the buffer where Vendor lib should use to
+ *  construct a HCI command packet as below format:
+ *
+ *  --------------------------------------------
+ *  |  HC_BT_HDR  |  HCI command               |
+ *  --------------------------------------------
+ *  where
+ *      HC_BT_HDR.event = 0x2000;
+ *      HC_BT_HDR.len = Length of HCI command;
+ *      HC_BT_HDR.offset = 0;
+ *      HC_BT_HDR.layer_specific = 0;
+ *
+ *  For example, a HCI_RESET Command will be formed as
+ *  ------------------------
+ *  |  HC_BT_HDR  |03|0c|00|
+ *  ------------------------
+ *  with
+ *      HC_BT_HDR.event = 0x2000;
+ *      HC_BT_HDR.len = 3;
+ *      HC_BT_HDR.offset = 0;
+ *      HC_BT_HDR.layer_specific = 0;
+ */
+typedef void* (*malloc_cb)(int size);
+
+/* datapath buffer deallocation callback (callout) */
+typedef void (*mdealloc_cb)(void* p_buf);
+
+/* define callback of the cmd_xmit_cb
+ *
+ *  The callback function which HCI lib will call with the return of command
+ *  complete packet. Vendor lib is responsible for releasing the buffer passed
+ *  in at the p_mem parameter by calling dealloc callout function.
+ */
+typedef void (*tINT_CMD_CBACK)(void* p_mem);
+
+/* hci command packet transmit callback (callout)
+ *
+ *  Vendor lib calls xmit_cb callout function in order to send a HCI Command
+ *  packet to BT Controller. The buffer carrying HCI Command packet content
+ *  needs to be first allocated through the alloc callout function.
+ *  HCI lib will release the buffer for Vendor lib once it has delivered the
+ *  packet content to BT Controller.
+ *
+ *  Vendor lib needs also provide a callback function (p_cback) which HCI lib
+ *  will call with the return of command complete packet.
+ *
+ *  The opcode parameter gives the HCI OpCode (combination of OGF and OCF) of
+ *  HCI Command packet. For example, opcode = 0x0c03 for the HCI_RESET command
+ *  packet.
+ */
+typedef uint8_t (*cmd_xmit_cb)(uint16_t opcode, void* p_buf,
+                               tINT_CMD_CBACK p_cback);
+
+typedef void (*cfg_a2dp_cb)(bt_vendor_op_result_t result, bt_vendor_opcode_t op,
+                            uint8_t bta_av_handle);
+
+typedef struct {
+  /** set to sizeof(bt_vendor_callbacks_t) */
+  size_t size;
+
+  /*
+   * Callback and callout functions have implemented in HCI libray
+   * (libbt-hci.so).
+   */
+
+  /* notifies caller result of firmware configuration request */
+  cfg_result_cb fwcfg_cb;
+
+  /* notifies caller result of sco configuration request */
+  cfg_result_cb scocfg_cb;
+
+  /* notifies caller result of lpm enable/disable */
+  cfg_result_cb lpm_cb;
+
+  /* notifies the result of codec setting */
+  cfg_result_cb audio_state_cb;
+
+  /* buffer allocation request */
+  malloc_cb alloc;
+
+  /* buffer deallocation request */
+  mdealloc_cb dealloc;
+
+  /* hci command packet transmit request */
+  cmd_xmit_cb xmit_cb;
+
+  /* notifies caller completion of epilog process */
+  cfg_result_cb epilog_cb;
+
+  /* notifies status of a2dp offload cmd's */
+  cfg_a2dp_cb a2dp_offload_cb;
+} bt_vendor_callbacks_t;
+
+/** A2DP offload request */
+typedef struct {
+  uint8_t bta_av_handle;  /* BTA_AV Handle for callbacks */
+  uint16_t xmit_quota;    /* Total ACL quota for light stack */
+  uint16_t acl_data_size; /* Max ACL data size across HCI transport */
+  uint16_t stream_mtu;
+  uint16_t local_cid;
+  uint16_t remote_cid;
+  uint16_t lm_handle;
+  uint8_t is_flushable; /* true if flushable channel */
+  uint32_t stream_source;
+  uint8_t codec_info[10]; /* Codec capabilities array */
+} bt_vendor_op_a2dp_offload_t;
+
+/*
+ * Bluetooth Host/Controller VENDOR Interface
+ */
+typedef struct {
+  /** Set to sizeof(bt_vndor_interface_t) */
+  size_t size;
+
+  /*
+   * Functions need to be implemented in Vendor libray (libbt-vendor.so).
+   */
+
+  /**
+   * Caller will open the interface and pass in the callback routines
+   * to the implemenation of this interface.
+   */
+  int (*init)(const bt_vendor_callbacks_t* p_cb, unsigned char* local_bdaddr);
+
+  /**  Vendor specific operations */
+  int (*op)(bt_vendor_opcode_t opcode, void* param);
+
+  /** Closes the interface */
+  void (*cleanup)(void);
+} bt_vendor_interface_t;
+
+/*
+ * External shared lib functions/data
+ */
+
+/* Entry point of DLib --
+ *      Vendor library needs to implement the body of bt_vendor_interface_t
+ *      structure and uses the below name as the variable name. HCI library
+ *      will use this symbol name to get address of the object through the
+ *      dlsym call.
+ */
+extern const bt_vendor_interface_t BLUETOOTH_VENDOR_LIB_INTERFACE;
+
+// MODIFICATION FOR NEW HAL/HIDL IMPLEMENTATION:
+// EXPOSE THE BT_HDR STRUCT HERE FOR THE VENDOR INTERFACE
+// ONLY, WITHOUT REQUIRING INCLUDES FROM system/bt OR OTHER
+// DIRECTORIES.
+// ONLY USED INSIDE transmit_cb.
+// DO NOT USE IN NEW HAL IMPLEMENTATIONS GOING FORWARD
+typedef struct
+{
+    uint16_t          event;
+    uint16_t          len;
+    uint16_t          offset;
+    uint16_t          layer_specific;
+    uint8_t           data[];
+} HC_BT_HDR;
+// /MODIFICATION
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BT_VENDOR_LIB_H */
diff --git a/bluetooth/1.0/default/hci_internals.h b/bluetooth/1.0/default/hci_internals.h
new file mode 100644
index 0000000..d839590
--- /dev/null
+++ b/bluetooth/1.0/default/hci_internals.h
@@ -0,0 +1,44 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#pragma once
+
+// HCI UART transport packet types (Volume 4, Part A, 2)
+enum HciPacketType {
+  HCI_PACKET_TYPE_UNKNOWN = 0,
+  HCI_PACKET_TYPE_COMMAND = 1,
+  HCI_PACKET_TYPE_ACL_DATA = 2,
+  HCI_PACKET_TYPE_SCO_DATA = 3,
+  HCI_PACKET_TYPE_EVENT = 4
+};
+
+// 2 bytes for opcode, 1 byte for parameter length (Volume 2, Part E, 5.4.1)
+const size_t HCI_COMMAND_PREAMBLE_SIZE = 3;
+const size_t HCI_LENGTH_OFFSET_CMD = 2;
+
+// 2 bytes for handle, 2 bytes for data length (Volume 2, Part E, 5.4.2)
+const size_t HCI_ACL_PREAMBLE_SIZE = 4;
+const size_t HCI_LENGTH_OFFSET_ACL = 2;
+
+// 2 bytes for handle, 1 byte for data length (Volume 2, Part E, 5.4.3)
+const size_t HCI_SCO_PREAMBLE_SIZE = 3;
+const size_t HCI_LENGTH_OFFSET_SCO = 2;
+
+// 1 byte for event code, 1 byte for parameter length (Volume 2, Part E, 5.4.4)
+const size_t HCI_EVENT_PREAMBLE_SIZE = 2;
+const size_t HCI_LENGTH_OFFSET_EVT = 1;
+
+const size_t HCI_PREAMBLE_SIZE_MAX = HCI_ACL_PREAMBLE_SIZE;
diff --git a/bluetooth/1.0/default/service.cpp b/bluetooth/1.0/default/service.cpp
new file mode 100644
index 0000000..a3c3cad
--- /dev/null
+++ b/bluetooth/1.0/default/service.cpp
@@ -0,0 +1,29 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#define LOG_TAG "android.hardware.bluetooth@1.0-service"
+
+#include <android/hardware/bluetooth/1.0/IBluetoothHci.h>
+
+#include <hidl/LegacySupport.h>
+
+// Generated HIDL files
+using android::hardware::bluetooth::V1_0::IBluetoothHci;
+using android::hardware::defaultPassthroughServiceImplementation;
+
+int main() {
+  return defaultPassthroughServiceImplementation<IBluetoothHci>("bluetooth");
+}
diff --git a/bluetooth/1.0/default/vendor_interface.cc b/bluetooth/1.0/default/vendor_interface.cc
new file mode 100644
index 0000000..7efd5bd
--- /dev/null
+++ b/bluetooth/1.0/default/vendor_interface.cc
@@ -0,0 +1,351 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#include "vendor_interface.h"
+
+#define LOG_TAG "android.hardware.bluetooth@1.0-impl"
+#include <android-base/logging.h>
+#include <utils/Log.h>
+
+#include <dlfcn.h>
+
+static const char* VENDOR_LIBRARY_NAME = "libbt-vendor.so";
+static const char* VENDOR_LIBRARY_SYMBOL_NAME =
+    "BLUETOOTH_VENDOR_LIB_INTERFACE";
+
+static const int INVALID_FD = -1;
+
+namespace {
+
+using android::hardware::bluetooth::V1_0::implementation::VendorInterface;
+
+tINT_CMD_CBACK internal_command_cb;
+VendorInterface* g_vendor_interface = nullptr;
+
+const size_t preamble_size_for_type[] = {
+    0, HCI_COMMAND_PREAMBLE_SIZE, HCI_ACL_PREAMBLE_SIZE, HCI_SCO_PREAMBLE_SIZE,
+    HCI_EVENT_PREAMBLE_SIZE};
+const size_t packet_length_offset_for_type[] = {
+    0, HCI_LENGTH_OFFSET_CMD, HCI_LENGTH_OFFSET_ACL, HCI_LENGTH_OFFSET_SCO,
+    HCI_LENGTH_OFFSET_EVT};
+
+size_t HciGetPacketLengthForType(
+    HciPacketType type, const android::hardware::hidl_vec<uint8_t>& packet) {
+  size_t offset = packet_length_offset_for_type[type];
+  if (type == HCI_PACKET_TYPE_ACL_DATA) {
+    return (((packet[offset + 1]) << 8) | packet[offset]);
+  }
+  return packet[offset];
+}
+
+HC_BT_HDR* WrapPacketAndCopy(uint16_t event,
+                             const android::hardware::hidl_vec<uint8_t>& data) {
+  size_t packet_size = data.size() + sizeof(HC_BT_HDR);
+  HC_BT_HDR* packet = reinterpret_cast<HC_BT_HDR*>(new uint8_t[packet_size]);
+  packet->offset = 0;
+  packet->len = data.size();
+  packet->layer_specific = 0;
+  packet->event = event;
+  // TODO(eisenbach): Avoid copy here; if BT_HDR->data can be enusred to
+  // be the only way the data is accessed, a pointer could be passed here...
+  memcpy(packet->data, data.data(), data.size());
+  return packet;
+}
+
+uint8_t transmit_cb(uint16_t opcode, void* buffer, tINT_CMD_CBACK callback) {
+  ALOGV("%s opcode: 0x%04x, ptr: %p", __func__, opcode, buffer);
+  HC_BT_HDR* bt_hdr = reinterpret_cast<HC_BT_HDR*>(buffer);
+
+  internal_command_cb = callback;
+  uint8_t type = HCI_PACKET_TYPE_COMMAND;
+  VendorInterface::get()->SendPrivate(&type, 1);
+  VendorInterface::get()->SendPrivate(bt_hdr->data, bt_hdr->len);
+  return true;
+}
+
+void firmware_config_cb(bt_vendor_op_result_t result) {
+  ALOGD("%s result: %d", __func__, result);
+  VendorInterface::get()->OnFirmwareConfigured(result);
+}
+
+void sco_config_cb(bt_vendor_op_result_t result) {
+  ALOGD("%s result: %d", __func__, result);
+}
+
+void low_power_mode_cb(bt_vendor_op_result_t result) {
+  ALOGD("%s result: %d", __func__, result);
+}
+
+void sco_audiostate_cb(bt_vendor_op_result_t result) {
+  ALOGD("%s result: %d", __func__, result);
+}
+
+void* buffer_alloc_cb(int size) {
+  void* p = new uint8_t[size];
+  ALOGV("%s pts: %p, size: %d", __func__, p, size);
+  return p;
+}
+
+void buffer_free_cb(void* buffer) {
+  ALOGV("%s ptr: %p", __func__, buffer);
+  delete[] reinterpret_cast<uint8_t*>(buffer);
+}
+
+void epilog_cb(bt_vendor_op_result_t result) {
+  ALOGD("%s result: %d", __func__, result);
+}
+
+void a2dp_offload_cb(bt_vendor_op_result_t result, bt_vendor_opcode_t op,
+                     uint8_t av_handle) {
+  ALOGD("%s result: %d, op: %d, handle: %d", __func__, result, op, av_handle);
+}
+
+const bt_vendor_callbacks_t lib_callbacks = {
+    sizeof(lib_callbacks), firmware_config_cb, sco_config_cb,
+    low_power_mode_cb,     sco_audiostate_cb,  buffer_alloc_cb,
+    buffer_free_cb,        transmit_cb,        epilog_cb,
+    a2dp_offload_cb};
+
+}  // namespace
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace implementation {
+
+bool VendorInterface::Initialize(PacketReadCallback packet_read_cb) {
+  assert(!g_vendor_interface);
+  g_vendor_interface = new VendorInterface();
+  return g_vendor_interface->Open(packet_read_cb);
+}
+
+void VendorInterface::Shutdown() {
+  CHECK(g_vendor_interface);
+  g_vendor_interface->Close();
+  delete g_vendor_interface;
+  g_vendor_interface = nullptr;
+}
+
+VendorInterface* VendorInterface::get() { return g_vendor_interface; }
+
+bool VendorInterface::Open(PacketReadCallback packet_read_cb) {
+  // TODO(eisenbach): P0 - get local BD address somehow
+  uint8_t local_bda[] = {0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff};
+
+  firmware_configured_ = false;
+  packet_read_cb_ = packet_read_cb;
+
+  // Initialize vendor interface
+
+  lib_handle_ = dlopen(VENDOR_LIBRARY_NAME, RTLD_NOW);
+  if (!lib_handle_) {
+    ALOGE("%s unable to open %s (%s)", __func__, VENDOR_LIBRARY_NAME,
+          dlerror());
+    return false;
+  }
+
+  lib_interface_ = reinterpret_cast<bt_vendor_interface_t*>(
+      dlsym(lib_handle_, VENDOR_LIBRARY_SYMBOL_NAME));
+  if (!lib_interface_) {
+    ALOGE("%s unable to find symbol %s in %s (%s)", __func__,
+          VENDOR_LIBRARY_SYMBOL_NAME, VENDOR_LIBRARY_NAME, dlerror());
+    return false;
+  }
+
+  int status = lib_interface_->init(&lib_callbacks, (unsigned char*)local_bda);
+  if (status) {
+    ALOGE("%s unable to initialize vendor library: %d", __func__, status);
+    return false;
+  }
+
+  ALOGD("%s vendor library loaded", __func__);
+
+  // Power cycle chip
+
+  int power_state = BT_VND_PWR_OFF;
+  lib_interface_->op(BT_VND_OP_POWER_CTRL, &power_state);
+  power_state = BT_VND_PWR_ON;
+  lib_interface_->op(BT_VND_OP_POWER_CTRL, &power_state);
+
+  // Get the UART socket
+
+  int fd_list[CH_MAX] = {0};
+  int fd_count = lib_interface_->op(BT_VND_OP_USERIAL_OPEN, &fd_list);
+
+  if (fd_count != 1) {
+    ALOGE("%s fd count %d != 1; we can't handle this currently...", __func__,
+          fd_count);
+    return false;
+  }
+
+  uart_fd_ = fd_list[0];
+  if (uart_fd_ == INVALID_FD) {
+    ALOGE("%s unable to determine UART fd", __func__);
+    return false;
+  }
+
+  ALOGD("%s UART fd: %d", __func__, uart_fd_);
+
+  fd_watcher_.WatchFdForNonBlockingReads(uart_fd_,
+                                         [this](int fd) { OnDataReady(fd); });
+
+  // Start configuring the firmware
+  lib_interface_->op(BT_VND_OP_FW_CFG, nullptr);
+
+  return true;
+}
+
+void VendorInterface::Close() {
+  fd_watcher_.StopWatchingFileDescriptor();
+
+  if (lib_interface_ != nullptr) {
+    lib_interface_->op(BT_VND_OP_USERIAL_CLOSE, nullptr);
+    uart_fd_ = INVALID_FD;
+    int power_state = BT_VND_PWR_OFF;
+    lib_interface_->op(BT_VND_OP_POWER_CTRL, &power_state);
+  }
+
+  if (lib_handle_ != nullptr) {
+    dlclose(lib_handle_);
+    lib_handle_ = nullptr;
+  }
+
+  firmware_configured_ = false;
+}
+
+size_t VendorInterface::Send(const uint8_t* data, size_t length) {
+  if (firmware_configured_ && queued_data_.size() == 0)
+    return SendPrivate(data, length);
+
+  if (!firmware_configured_) {
+    ALOGI("%s queueing command", __func__);
+    queued_data_.resize(queued_data_.size() + length);
+    uint8_t* append_ptr = &queued_data_[queued_data_.size() - length];
+    memcpy(append_ptr, data, length);
+    return length;
+  }
+
+  ALOGI("%s sending queued command", __func__);
+  SendPrivate(queued_data_.data(), queued_data_.size());
+  queued_data_.resize(0);
+
+  ALOGI("%s done sending queued command", __func__);
+
+  return SendPrivate(data, length);
+}
+
+size_t VendorInterface::SendPrivate(const uint8_t* data, size_t length) {
+  if (uart_fd_ == INVALID_FD) return 0;
+
+  size_t transmitted_length = 0;
+  while (length > 0) {
+    ssize_t ret =
+        TEMP_FAILURE_RETRY(write(uart_fd_, data + transmitted_length, length));
+
+    if (ret == -1) {
+      if (errno == EAGAIN) continue;
+      ALOGE("%s error writing to UART (%s)", __func__, strerror(errno));
+      break;
+
+    } else if (ret == 0) {
+      // Nothing written :(
+      ALOGE("%s zero bytes written - something went wrong...", __func__);
+      break;
+    }
+
+    transmitted_length += ret;
+    length -= ret;
+  }
+
+  return transmitted_length;
+}
+
+void VendorInterface::OnFirmwareConfigured(uint8_t result) {
+  ALOGI("%s: result = %d", __func__, result);
+  firmware_configured_ = true;
+  VendorInterface::get()->Send(NULL, 0);
+}
+
+void VendorInterface::OnDataReady(int fd) {
+  switch (hci_parser_state_) {
+    case HCI_IDLE: {
+      uint8_t buffer[1] = {0};
+      size_t bytes_read = TEMP_FAILURE_RETRY(read(fd, buffer, 1));
+      CHECK(bytes_read == 1);
+      hci_packet_type_ = static_cast<HciPacketType>(buffer[0]);
+      // TODO(eisenbach): Check for workaround(s)
+      CHECK(hci_packet_type_ >= HCI_PACKET_TYPE_ACL_DATA &&
+            hci_packet_type_ <= HCI_PACKET_TYPE_EVENT)
+          << "buffer[0] = " << buffer[0];
+      hci_parser_state_ = HCI_TYPE_READY;
+      hci_packet_.resize(HCI_PREAMBLE_SIZE_MAX);
+      hci_packet_bytes_remaining_ = preamble_size_for_type[hci_packet_type_];
+      hci_packet_bytes_read_ = 0;
+      break;
+    }
+
+    case HCI_TYPE_READY: {
+      size_t bytes_read = TEMP_FAILURE_RETRY(
+          read(fd, hci_packet_.data() + hci_packet_bytes_read_,
+               hci_packet_bytes_remaining_));
+      CHECK(bytes_read > 0);
+      hci_packet_bytes_remaining_ -= bytes_read;
+      hci_packet_bytes_read_ += bytes_read;
+      if (hci_packet_bytes_remaining_ == 0) {
+        size_t packet_length =
+            HciGetPacketLengthForType(hci_packet_type_, hci_packet_);
+        hci_packet_.resize(preamble_size_for_type[hci_packet_type_] +
+                           packet_length);
+        hci_packet_bytes_remaining_ = packet_length;
+        hci_parser_state_ = HCI_PAYLOAD;
+        hci_packet_bytes_read_ = 0;
+      }
+      break;
+    }
+
+    case HCI_PAYLOAD: {
+      size_t bytes_read = TEMP_FAILURE_RETRY(
+          read(fd,
+               hci_packet_.data() + preamble_size_for_type[hci_packet_type_] +
+                   hci_packet_bytes_read_,
+               hci_packet_bytes_remaining_));
+      hci_packet_bytes_remaining_ -= bytes_read;
+      hci_packet_bytes_read_ += bytes_read;
+      if (hci_packet_bytes_remaining_ == 0) {
+        if (firmware_configured_) {
+          if (packet_read_cb_ != nullptr) {
+            packet_read_cb_(hci_packet_type_, hci_packet_);
+          }
+        } else {
+          if (internal_command_cb != nullptr) {
+            HC_BT_HDR* bt_hdr =
+                WrapPacketAndCopy(HCI_PACKET_TYPE_EVENT, hci_packet_);
+            internal_command_cb(bt_hdr);
+          }
+        }
+        hci_parser_state_ = HCI_IDLE;
+      }
+      break;
+    }
+  }
+}
+
+}  // namespace implementation
+}  // namespace V1_0
+}  // namespace bluetooth
+}  // namespace hardware
+}  // namespace android
diff --git a/bluetooth/1.0/default/vendor_interface.h b/bluetooth/1.0/default/vendor_interface.h
new file mode 100644
index 0000000..133c51b
--- /dev/null
+++ b/bluetooth/1.0/default/vendor_interface.h
@@ -0,0 +1,82 @@
+//
+// Copyright 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+#pragma once
+
+#include <hidl/HidlSupport.h>
+
+#include "async_fd_watcher.h"
+#include "bt_vendor_lib.h"
+#include "hci_internals.h"
+
+namespace android {
+namespace hardware {
+namespace bluetooth {
+namespace V1_0 {
+namespace implementation {
+
+using ::android::hardware::hidl_vec;
+using PacketReadCallback = std::function<void(HciPacketType, const hidl_vec<uint8_t>&)>;
+
+class VendorInterface {
+ public:
+  static bool Initialize(PacketReadCallback packet_read_cb);
+  static void Shutdown();
+  static VendorInterface* get();
+
+  size_t Send(const uint8_t *data, size_t length);
+
+  void OnFirmwareConfigured(uint8_t result);
+
+  // Actually send the data.
+  size_t SendPrivate(const uint8_t *data, size_t length);
+
+ private:
+  VendorInterface() { queued_data_.resize(0); }
+  virtual ~VendorInterface() = default;
+
+  bool Open(PacketReadCallback packet_read_cb);
+  void Close();
+
+  void OnDataReady(int fd);
+
+  // Queue data from Send() until the interface is ready.
+  hidl_vec<uint8_t> queued_data_;
+
+  void *lib_handle_;
+  bt_vendor_interface_t *lib_interface_;
+  AsyncFdWatcher fd_watcher_;
+  int uart_fd_;
+  PacketReadCallback packet_read_cb_;
+  bool firmware_configured_;
+
+  enum HciParserState {
+    HCI_IDLE,
+    HCI_TYPE_READY,
+    HCI_PAYLOAD
+  };
+  HciParserState hci_parser_state_{HCI_IDLE};
+  HciPacketType hci_packet_type_{HCI_PACKET_TYPE_UNKNOWN};
+  hidl_vec<uint8_t> hci_packet_;
+  size_t hci_packet_bytes_remaining_;
+  size_t hci_packet_bytes_read_;
+};
+
+} // namespace implementation
+} // namespace V1_0
+} // namespace bluetooth
+} // namespace hardware
+} // namespace android
diff --git a/bluetooth/1.0/vts/functional/Android.bp b/bluetooth/1.0/vts/functional/Android.bp
new file mode 100644
index 0000000..7d04736
--- /dev/null
+++ b/bluetooth/1.0/vts/functional/Android.bp
@@ -0,0 +1,41 @@
+//
+// Copyright (C) 2016 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+
+cc_test {
+    name: "bluetooth_hidl_hal_test",
+    gtest: true,
+    srcs: ["bluetooth_hidl_hal_test.cpp"],
+    shared_libs: [
+        "libbase",
+        "liblog",
+        "libcutils",
+        "libhidlbase",
+        "libhidltransport",
+        "libhwbinder",
+        "libnativehelper",
+        "libutils",
+        "android.hardware.bluetooth@1.0",
+    ],
+    static_libs: ["libgtest"],
+    cflags: [
+        "--coverage",
+        "-O0",
+        "-g",
+    ],
+    ldflags: [
+        "--coverage",
+    ],
+}
diff --git a/bluetooth/1.0/vts/functional/bluetooth_hidl_hal_test.cpp b/bluetooth/1.0/vts/functional/bluetooth_hidl_hal_test.cpp
new file mode 100644
index 0000000..b05e22b
--- /dev/null
+++ b/bluetooth/1.0/vts/functional/bluetooth_hidl_hal_test.cpp
@@ -0,0 +1,692 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "bluetooth_hidl_hal_test"
+#include <android-base/logging.h>
+
+#include <android/hardware/bluetooth/1.0/IBluetoothHci.h>
+#include <android/hardware/bluetooth/1.0/IBluetoothHciCallbacks.h>
+#include <android/hardware/bluetooth/1.0/types.h>
+#include <hardware/bluetooth.h>
+#include <hwbinder/ProcessState.h>
+#include <utils/Log.h>
+
+#include <gtest/gtest.h>
+#include <condition_variable>
+#include <mutex>
+#include <queue>
+
+using ::android::hardware::bluetooth::V1_0::IBluetoothHci;
+using ::android::hardware::bluetooth::V1_0::IBluetoothHciCallbacks;
+using ::android::hardware::bluetooth::V1_0::Status;
+using ::android::hardware::hidl_vec;
+using ::android::hardware::Return;
+using ::android::hardware::Void;
+using ::android::sp;
+
+#define Bluetooth_HCI_SERVICE_NAME "bluetooth"
+
+#define HCI_MINIMUM_HCI_VERSION 5  // Bluetooth Core Specification 3.0 + HS
+#define HCI_MINIMUM_LMP_VERSION 5  // Bluetooth Core Specification 3.0 + HS
+#define NUM_HCI_COMMANDS_BANDWIDTH 1000
+#define NUM_SCO_PACKETS_BANDWIDTH 1000
+#define NUM_ACL_PACKETS_BANDWIDTH 1000
+#define WAIT_FOR_HCI_EVENT_TIMEOUT std::chrono::milliseconds(2000)
+#define WAIT_FOR_SCO_DATA_TIMEOUT std::chrono::milliseconds(1000)
+#define WAIT_FOR_ACL_DATA_TIMEOUT std::chrono::milliseconds(1000)
+
+#define COMMAND_HCI_SHOULD_BE_UNKNOWN \
+  { 0xff, 0x3B, 0x08, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }
+#define COMMAND_HCI_READ_LOCAL_VERSION_INFORMATION \
+  { 0x01, 0x10, 0x00 }
+#define COMMAND_HCI_READ_BUFFER_SIZE \
+  { 0x05, 0x10, 0x00 }
+#define COMMAND_HCI_WRITE_LOOPBACK_MODE_LOCAL \
+  { 0x02, 0x18, 0x01, 0x01 }
+#define COMMAND_HCI_RESET \
+  { 0x03, 0x0c, 0x00 }
+#define COMMAND_HCI_WRITE_LOCAL_NAME \
+  { 0x13, 0x0c, 0xf8 }
+#define HCI_STATUS_SUCCESS 0x00
+#define HCI_STATUS_UNKNOWN_HCI_COMMAND 0x01
+
+#define EVENT_CONNECTION_COMPLETE 0x03
+#define EVENT_COMMAND_COMPLETE 0x0e
+#define EVENT_COMMAND_STATUS 0x0f
+#define EVENT_NUMBER_OF_COMPLETED_PACKETS 0x13
+#define EVENT_LOOPBACK_COMMAND 0x19
+
+#define EVENT_CODE_BYTE 0
+#define EVENT_LENGTH_BYTE 1
+#define EVENT_FIRST_PAYLOAD_BYTE 2
+#define EVENT_COMMAND_STATUS_STATUS_BYTE 2
+#define EVENT_COMMAND_STATUS_ALLOWED_PACKETS_BYTE 3
+#define EVENT_COMMAND_STATUS_OPCODE_LSBYTE 4  // Bytes 4 and 5
+#define EVENT_COMMAND_COMPLETE_ALLOWED_PACKETS_BYTE 2
+#define EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE 3  // Bytes 3 and 4
+#define EVENT_COMMAND_COMPLETE_STATUS_BYTE 5
+#define EVENT_COMMAND_COMPLETE_FIRST_PARAM_BYTE 6
+#define EVENT_LOCAL_HCI_VERSION_BYTE EVENT_COMMAND_COMPLETE_FIRST_PARAM_BYTE
+#define EVENT_LOCAL_LMP_VERSION_BYTE EVENT_LOCAL_HCI_VERSION_BYTE + 3
+
+#define EVENT_CONNECTION_COMPLETE_PARAM_LENGTH 11
+#define EVENT_CONNECTION_COMPLETE_TYPE 11
+#define EVENT_CONNECTION_COMPLETE_TYPE_SCO 0
+#define EVENT_CONNECTION_COMPLETE_TYPE_ACL 1
+#define EVENT_CONNECTION_COMPLETE_HANDLE_LSBYTE 3
+#define EVENT_COMMAND_STATUS_LENGTH 4
+
+#define EVENT_NUMBER_OF_COMPLETED_PACKETS_NUM_HANDLES 2
+
+#define ACL_BROADCAST_ACTIVE_SLAVE (0x1 << 4)
+#define ACL_PACKET_BOUNDARY_COMPLETE (0x3 << 6)
+
+class ThroughputLogger {
+ public:
+  ThroughputLogger(std::string task)
+      : task_(task), start_time_(std::chrono::steady_clock::now()) {}
+
+  ~ThroughputLogger() {
+    if (total_bytes_ == 0) return;
+    std::chrono::duration<double> duration =
+        std::chrono::steady_clock::now() - start_time_;
+    double s = duration.count();
+    if (s == 0) return;
+    double rate_kb = (static_cast<double>(total_bytes_) / s) / 1024;
+    ALOGD("%s %.1f KB/s (%zu bytes in %.3fs)", task_.c_str(), rate_kb,
+          total_bytes_, s);
+  }
+
+  void setTotalBytes(size_t total_bytes) { total_bytes_ = total_bytes; }
+
+ private:
+  size_t total_bytes_;
+  std::string task_;
+  std::chrono::steady_clock::time_point start_time_;
+};
+
+// The main test class for Bluetooth HIDL HAL.
+class BluetoothHidlTest : public ::testing::Test {
+ public:
+  virtual void SetUp() override {
+    // currently test passthrough mode only
+    bluetooth = IBluetoothHci::getService(Bluetooth_HCI_SERVICE_NAME);
+    ALOGW("%s: getService(%s) is %s", __func__, Bluetooth_HCI_SERVICE_NAME,
+          bluetooth->isRemote() ? "remote" : "local");
+    ASSERT_NE(bluetooth, nullptr);
+
+    // TODO(b/31748996) A client must be completely unaware of the
+    // implementation details of its HAL: whether the HAL is passthrough, or
+    // whether it uses HWbinder or some other transport.
+    if (bluetooth->isRemote()) {
+      ::android::hardware::ProcessState::self()->setThreadPoolMaxThreadCount(1);
+      ::android::hardware::ProcessState::self()->startThreadPool();
+    }
+
+    bluetooth_cb = new BluetoothHciCallbacks(*this);
+    ASSERT_NE(bluetooth_cb, nullptr);
+
+    max_acl_data_packet_length = 0;
+    max_sco_data_packet_length = 0;
+    max_acl_data_packets = 0;
+    max_sco_data_packets = 0;
+
+    event_count = 0;
+    acl_count = 0;
+    sco_count = 0;
+    event_cb_count = 0;
+    acl_cb_count = 0;
+    sco_cb_count = 0;
+
+    // Collision with android::hardware::Status
+    EXPECT_EQ(android::hardware::bluetooth::V1_0::Status::SUCCESS,
+              bluetooth->initialize(bluetooth_cb));
+  }
+
+  virtual void TearDown() override {
+    bluetooth->close();
+    EXPECT_EQ(static_cast<size_t>(0), event_queue.size());
+    EXPECT_EQ(static_cast<size_t>(0), sco_queue.size());
+    EXPECT_EQ(static_cast<size_t>(0), acl_queue.size());
+  }
+
+  void setBufferSizes();
+
+  // Functions called from within tests in loopback mode
+  void sendAndCheckHCI(int num_packets);
+  void sendAndCheckSCO(int num_packets, size_t size, uint16_t handle);
+  void sendAndCheckACL(int num_packets, size_t size, uint16_t handle);
+
+  // Helper functions to try to get a handle on verbosity
+  void enterLoopbackMode(std::vector<uint16_t>& sco_handles,
+                         std::vector<uint16_t>& acl_handles);
+  void wait_for_command_complete_event(hidl_vec<uint8_t> cmd);
+  int wait_for_completed_packets_event(uint16_t handle);
+
+  // Inform the test about an event callback
+  inline void notify_event_received() {
+    std::unique_lock<std::mutex> lock(event_mutex);
+    event_count++;
+    event_condition.notify_one();
+  }
+
+  // Test code calls this function to wait for an event callback
+  inline void wait_for_event() {
+    std::unique_lock<std::mutex> lock(event_mutex);
+
+    auto start_time = std::chrono::steady_clock::now();
+    while (event_count == 0)
+      if (event_condition.wait_until(lock,
+                                     start_time + WAIT_FOR_HCI_EVENT_TIMEOUT) ==
+          std::cv_status::timeout)
+        return;
+    event_count--;
+  }
+
+  // Inform the test about an acl data callback
+  inline void notify_acl_data_received() {
+    std::unique_lock<std::mutex> lock(acl_mutex);
+    acl_count++;
+    acl_condition.notify_one();
+  }
+
+  // Test code calls this function to wait for an acl data callback
+  inline void wait_for_acl() {
+    std::unique_lock<std::mutex> lock(acl_mutex);
+
+    while (acl_count == 0)
+      acl_condition.wait_until(
+          lock, std::chrono::steady_clock::now() + WAIT_FOR_ACL_DATA_TIMEOUT);
+    acl_count--;
+  }
+
+  // Inform the test about a sco data callback
+  inline void notify_sco_data_received() {
+    std::unique_lock<std::mutex> lock(sco_mutex);
+    sco_count++;
+    sco_condition.notify_one();
+  }
+
+  // Test code calls this function to wait for a sco data callback
+  inline void wait_for_sco() {
+    std::unique_lock<std::mutex> lock(sco_mutex);
+
+    while (sco_count == 0)
+      sco_condition.wait_until(
+          lock, std::chrono::steady_clock::now() + WAIT_FOR_SCO_DATA_TIMEOUT);
+    sco_count--;
+  }
+
+  // A simple test implementation of BluetoothHciCallbacks.
+  class BluetoothHciCallbacks : public IBluetoothHciCallbacks {
+    BluetoothHidlTest& parent_;
+
+   public:
+    BluetoothHciCallbacks(BluetoothHidlTest& parent) : parent_(parent){};
+
+    virtual ~BluetoothHciCallbacks() = default;
+
+    Return<void> hciEventReceived(
+        const ::android::hardware::hidl_vec<uint8_t>& event) override {
+      parent_.event_cb_count++;
+      parent_.event_queue.push(event);
+      parent_.notify_event_received();
+      ALOGV("Event received (length = %d)", static_cast<int>(event.size()));
+      return Void();
+    };
+
+    Return<void> aclDataReceived(
+        const ::android::hardware::hidl_vec<uint8_t>& data) override {
+      parent_.acl_cb_count++;
+      parent_.acl_queue.push(data);
+      parent_.notify_acl_data_received();
+      return Void();
+    };
+
+    Return<void> scoDataReceived(
+        const ::android::hardware::hidl_vec<uint8_t>& data) override {
+      parent_.sco_cb_count++;
+      parent_.sco_queue.push(data);
+      parent_.notify_sco_data_received();
+      return Void();
+    };
+  };
+
+  sp<IBluetoothHci> bluetooth;
+  sp<IBluetoothHciCallbacks> bluetooth_cb;
+  std::queue<hidl_vec<uint8_t>> event_queue;
+  std::queue<hidl_vec<uint8_t>> acl_queue;
+  std::queue<hidl_vec<uint8_t>> sco_queue;
+
+  int event_cb_count;
+  int sco_cb_count;
+  int acl_cb_count;
+
+  int max_acl_data_packet_length;
+  int max_sco_data_packet_length;
+  int max_acl_data_packets;
+  int max_sco_data_packets;
+
+ private:
+  std::mutex event_mutex;
+  std::mutex sco_mutex;
+  std::mutex acl_mutex;
+  std::condition_variable event_condition;
+  std::condition_variable sco_condition;
+  std::condition_variable acl_condition;
+  int event_count;
+  int sco_count;
+  int acl_count;
+};
+
+// A class for test environment setup (kept since this file is a template).
+class BluetoothHidlEnvironment : public ::testing::Environment {
+ public:
+  virtual void SetUp() {}
+  virtual void TearDown() {}
+
+ private:
+};
+
+// Receive and check status events until a COMMAND_COMPLETE is received.
+void BluetoothHidlTest::wait_for_command_complete_event(hidl_vec<uint8_t> cmd) {
+  // Allow intermediate COMMAND_STATUS events
+  int status_event_count = 0;
+  hidl_vec<uint8_t> event;
+  do {
+    wait_for_event();
+    EXPECT_LT(static_cast<size_t>(0), event_queue.size());
+    if (event_queue.size() == 0) {
+      event.resize(0);
+      break;
+    }
+    event = event_queue.front();
+    event_queue.pop();
+    EXPECT_GT(event.size(),
+              static_cast<size_t>(EVENT_COMMAND_STATUS_OPCODE_LSBYTE + 1));
+    if (event[EVENT_CODE_BYTE] == EVENT_COMMAND_STATUS) {
+      EXPECT_EQ(EVENT_COMMAND_STATUS_LENGTH, event[EVENT_LENGTH_BYTE]);
+      EXPECT_EQ(cmd[0], event[EVENT_COMMAND_STATUS_OPCODE_LSBYTE]);
+      EXPECT_EQ(cmd[1], event[EVENT_COMMAND_STATUS_OPCODE_LSBYTE + 1]);
+      EXPECT_EQ(event[EVENT_COMMAND_STATUS_STATUS_BYTE], HCI_STATUS_SUCCESS);
+      status_event_count++;
+    }
+  } while (event.size() > 0 && event[EVENT_CODE_BYTE] == EVENT_COMMAND_STATUS);
+
+  EXPECT_GT(event.size(),
+            static_cast<size_t>(EVENT_COMMAND_COMPLETE_STATUS_BYTE));
+  EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]);
+  EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]);
+  EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]);
+  EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]);
+}
+
+// Send the command to read the controller's buffer sizes.
+void BluetoothHidlTest::setBufferSizes() {
+  hidl_vec<uint8_t> cmd = COMMAND_HCI_READ_BUFFER_SIZE;
+  bluetooth->sendHciCommand(cmd);
+
+  wait_for_event();
+
+  EXPECT_LT(static_cast<size_t>(0), event_queue.size());
+  if (event_queue.size() == 0) return;
+
+  hidl_vec<uint8_t> event = event_queue.front();
+  event_queue.pop();
+
+  EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]);
+  EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]);
+  EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]);
+  EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]);
+
+  max_acl_data_packet_length =
+      event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 1] +
+      (event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 2] << 8);
+  max_sco_data_packet_length = event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 3];
+  max_acl_data_packets = event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 4] +
+                         (event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 5] << 8);
+  max_sco_data_packets = event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 6] +
+                         (event[EVENT_COMMAND_COMPLETE_STATUS_BYTE + 7] << 8);
+
+  ALOGD("%s: ACL max %d num %d SCO max %d num %d", __func__,
+        static_cast<int>(max_acl_data_packet_length),
+        static_cast<int>(max_acl_data_packets),
+        static_cast<int>(max_sco_data_packet_length),
+        static_cast<int>(max_sco_data_packets));
+}
+
+// Send an HCI command (in Loopback mode) and check the response.
+void BluetoothHidlTest::sendAndCheckHCI(int num_packets) {
+  ThroughputLogger logger = {__func__};
+  for (int n = 0; n < num_packets; n++) {
+    // Send an HCI packet
+    std::vector<uint8_t> write_name = COMMAND_HCI_WRITE_LOCAL_NAME;
+    // With a name
+    char new_name[] = "John Jacob Jingleheimer Schmidt ___________________0";
+    size_t new_name_length = strlen(new_name);
+    for (size_t i = 0; i < new_name_length; i++)
+      write_name.push_back(static_cast<uint8_t>(new_name[i]));
+    // And the packet number
+    {
+      size_t i = new_name_length - 1;
+      for (int digits = n; digits > 0; digits = digits / 10, i--)
+        write_name[i] = static_cast<uint8_t>('0' + digits % 10);
+    }
+    // And padding
+    for (size_t i = 0; i < 248 - new_name_length; i++)
+      write_name.push_back(static_cast<uint8_t>(0));
+
+    hidl_vec<uint8_t> cmd = write_name;
+    bluetooth->sendHciCommand(cmd);
+
+    // Check the loopback of the HCI packet
+    wait_for_event();
+    hidl_vec<uint8_t> event = event_queue.front();
+    event_queue.pop();
+    size_t compare_length =
+        (cmd.size() > static_cast<size_t>(0xff) ? static_cast<size_t>(0xff)
+                                                : cmd.size());
+    EXPECT_GT(event.size(), compare_length + EVENT_FIRST_PAYLOAD_BYTE - 1);
+
+    EXPECT_EQ(EVENT_LOOPBACK_COMMAND, event[EVENT_CODE_BYTE]);
+    EXPECT_EQ(compare_length, event[EVENT_LENGTH_BYTE]);
+    if (n == 0) logger.setTotalBytes(cmd.size() * num_packets * 2);
+
+    for (size_t i = 0; i < compare_length; i++)
+      EXPECT_EQ(cmd[i], event[EVENT_FIRST_PAYLOAD_BYTE + i]);
+  }
+}
+
+// Send a SCO data packet (in Loopback mode) and check the response.
+void BluetoothHidlTest::sendAndCheckSCO(int num_packets, size_t size,
+                                        uint16_t handle) {
+  ThroughputLogger logger = {__func__};
+  for (int n = 0; n < num_packets; n++) {
+    // Send a SCO packet
+    hidl_vec<uint8_t> sco_packet;
+    std::vector<uint8_t> sco_vector;
+    sco_vector.push_back(static_cast<uint8_t>(handle & 0xff));
+    sco_vector.push_back(static_cast<uint8_t>((handle & 0x0f00) >> 8));
+    sco_vector.push_back(static_cast<uint8_t>(size & 0xff));
+    sco_vector.push_back(static_cast<uint8_t>((size & 0xff00) >> 8));
+    for (size_t i = 0; i < size; i++) {
+      sco_vector.push_back(static_cast<uint8_t>(i + n));
+    }
+    sco_packet = sco_vector;
+    bluetooth->sendScoData(sco_vector);
+
+    // Check the loopback of the SCO packet
+    wait_for_sco();
+    hidl_vec<uint8_t> sco_loopback = sco_queue.front();
+    sco_queue.pop();
+
+    EXPECT_EQ(sco_packet.size(), sco_loopback.size());
+    size_t successful_bytes = 0;
+
+    if (n == 0) logger.setTotalBytes(num_packets * size * 2);
+
+    for (size_t i = 0; i < sco_packet.size(); i++) {
+      if (sco_packet[i] == sco_loopback[i]) {
+        successful_bytes = i;
+      } else {
+        ALOGE("Miscompare at %d (expected %x, got %x)", static_cast<int>(i),
+              sco_packet[i], sco_loopback[i]);
+        ALOGE("At %d (expected %x, got %x)", static_cast<int>(i + 1),
+              sco_packet[i + 1], sco_loopback[i + 1]);
+        break;
+      }
+    }
+    EXPECT_EQ(sco_packet.size(), successful_bytes + 1);
+  }
+}
+
+// Send an ACL data packet (in Loopback mode) and check the response.
+void BluetoothHidlTest::sendAndCheckACL(int num_packets, size_t size,
+                                        uint16_t handle) {
+  ThroughputLogger logger = {__func__};
+  for (int n = 0; n < num_packets; n++) {
+    // Send an ACL packet
+    hidl_vec<uint8_t> acl_packet;
+    std::vector<uint8_t> acl_vector;
+    acl_vector.push_back(static_cast<uint8_t>(handle & 0xff));
+    acl_vector.push_back(static_cast<uint8_t>((handle & 0x0f00) >> 8) |
+                         ACL_BROADCAST_ACTIVE_SLAVE |
+                         ACL_PACKET_BOUNDARY_COMPLETE);
+    acl_vector.push_back(static_cast<uint8_t>(size & 0xff));
+    acl_vector.push_back(static_cast<uint8_t>((size & 0xff00) >> 8));
+    for (size_t i = 0; i < size; i++) {
+      acl_vector.push_back(static_cast<uint8_t>(i + n));
+    }
+    acl_packet = acl_vector;
+    bluetooth->sendAclData(acl_vector);
+
+    // Check the loopback of the ACL packet
+    wait_for_acl();
+    hidl_vec<uint8_t> acl_loopback = acl_queue.front();
+    acl_queue.pop();
+
+    EXPECT_EQ(acl_packet.size(), acl_loopback.size());
+    size_t successful_bytes = 0;
+
+    if (n == 0) logger.setTotalBytes(num_packets * size * 2);
+
+    for (size_t i = 0; i < acl_packet.size(); i++) {
+      if (acl_packet[i] == acl_loopback[i]) {
+        successful_bytes = i;
+      } else {
+        ALOGE("Miscompare at %d (expected %x, got %x)", static_cast<int>(i),
+              acl_packet[i], acl_loopback[i]);
+        ALOGE("At %d (expected %x, got %x)", static_cast<int>(i + 1),
+              acl_packet[i + 1], acl_loopback[i + 1]);
+        break;
+      }
+    }
+    EXPECT_EQ(acl_packet.size(), successful_bytes + 1);
+  }
+}
+
+// Return the number of completed packets reported by the controller.
+int BluetoothHidlTest::wait_for_completed_packets_event(uint16_t handle) {
+  wait_for_event();
+  int packets_processed = 0;
+  while (event_queue.size() > 0) {
+    hidl_vec<uint8_t> event = event_queue.front();
+    event_queue.pop();
+
+    EXPECT_EQ(EVENT_NUMBER_OF_COMPLETED_PACKETS, event[EVENT_CODE_BYTE]);
+    EXPECT_EQ(1, event[EVENT_NUMBER_OF_COMPLETED_PACKETS_NUM_HANDLES]);
+
+    uint16_t event_handle = event[3] + (event[4] << 8);
+    EXPECT_EQ(handle, event_handle);
+
+    packets_processed += event[5] + (event[6] << 8);
+  }
+  return packets_processed;
+}
+
+// Send local loopback command and initialize SCO and ACL handles.
+void BluetoothHidlTest::enterLoopbackMode(std::vector<uint16_t>& sco_handles,
+                                          std::vector<uint16_t>& acl_handles) {
+  hidl_vec<uint8_t> cmd = COMMAND_HCI_WRITE_LOOPBACK_MODE_LOCAL;
+  bluetooth->sendHciCommand(cmd);
+
+  // Receive connection complete events with data channels
+  int connection_event_count = 0;
+  hidl_vec<uint8_t> event;
+  do {
+    wait_for_event();
+    event = event_queue.front();
+    event_queue.pop();
+    EXPECT_GT(event.size(),
+              static_cast<size_t>(EVENT_COMMAND_COMPLETE_STATUS_BYTE));
+    if (event[EVENT_CODE_BYTE] == EVENT_CONNECTION_COMPLETE) {
+      EXPECT_GT(event.size(),
+                static_cast<size_t>(EVENT_CONNECTION_COMPLETE_TYPE));
+      EXPECT_EQ(event[EVENT_LENGTH_BYTE],
+                EVENT_CONNECTION_COMPLETE_PARAM_LENGTH);
+      uint8_t connection_type = event[EVENT_CONNECTION_COMPLETE_TYPE];
+
+      EXPECT_TRUE(connection_type == EVENT_CONNECTION_COMPLETE_TYPE_SCO ||
+                  connection_type == EVENT_CONNECTION_COMPLETE_TYPE_ACL);
+
+      // Save handles
+      uint16_t handle = event[EVENT_CONNECTION_COMPLETE_HANDLE_LSBYTE] |
+                        event[EVENT_CONNECTION_COMPLETE_HANDLE_LSBYTE + 1] << 8;
+      if (connection_type == EVENT_CONNECTION_COMPLETE_TYPE_SCO)
+        sco_handles.push_back(handle);
+      else
+        acl_handles.push_back(handle);
+
+      ALOGD("Connect complete type = %d handle = %d",
+            event[EVENT_CONNECTION_COMPLETE_TYPE], handle);
+      connection_event_count++;
+    }
+  } while (event[EVENT_CODE_BYTE] == EVENT_CONNECTION_COMPLETE);
+
+  EXPECT_GT(connection_event_count, 0);
+
+  EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]);
+  EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]);
+  EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]);
+  EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]);
+}
+
+// Empty test: Initialize()/Close() are called in SetUp()/TearDown().
+TEST_F(BluetoothHidlTest, InitializeAndClose) { }
+
+// Send an HCI Reset with sendHciCommand and wait for a command complete event.
+TEST_F(BluetoothHidlTest, HciReset) {
+  hidl_vec<uint8_t> cmd = COMMAND_HCI_RESET;
+  bluetooth->sendHciCommand(cmd);
+
+  wait_for_command_complete_event(cmd);
+}
+
+// Read and check the HCI version of the controller.
+TEST_F(BluetoothHidlTest, HciVersionTest) {
+  hidl_vec<uint8_t> cmd = COMMAND_HCI_READ_LOCAL_VERSION_INFORMATION;
+  bluetooth->sendHciCommand(cmd);
+
+  wait_for_event();
+
+  hidl_vec<uint8_t> event = event_queue.front();
+  event_queue.pop();
+  EXPECT_GT(event.size(), static_cast<size_t>(EVENT_LOCAL_LMP_VERSION_BYTE));
+
+  EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]);
+  EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]);
+  EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]);
+  EXPECT_EQ(HCI_STATUS_SUCCESS, event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]);
+
+  EXPECT_LE(HCI_MINIMUM_HCI_VERSION, event[EVENT_LOCAL_HCI_VERSION_BYTE]);
+  EXPECT_LE(HCI_MINIMUM_LMP_VERSION, event[EVENT_LOCAL_LMP_VERSION_BYTE]);
+}
+
+// Send an unknown HCI command and wait for the error message.
+TEST_F(BluetoothHidlTest, HciUnknownCommand) {
+  hidl_vec<uint8_t> cmd = COMMAND_HCI_SHOULD_BE_UNKNOWN;
+  bluetooth->sendHciCommand(cmd);
+
+  wait_for_event();
+
+  hidl_vec<uint8_t> event = event_queue.front();
+  event_queue.pop();
+  EXPECT_GT(event.size(),
+            static_cast<size_t>(EVENT_COMMAND_STATUS_OPCODE_LSBYTE + 1));
+
+  EXPECT_EQ(EVENT_COMMAND_COMPLETE, event[EVENT_CODE_BYTE]);
+  EXPECT_EQ(cmd[0], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE]);
+  EXPECT_EQ(cmd[1], event[EVENT_COMMAND_COMPLETE_OPCODE_LSBYTE + 1]);
+  EXPECT_EQ(HCI_STATUS_UNKNOWN_HCI_COMMAND,
+            event[EVENT_COMMAND_COMPLETE_STATUS_BYTE]);
+}
+
+// Enter loopback mode, but don't send any packets.
+TEST_F(BluetoothHidlTest, WriteLoopbackMode) {
+  std::vector<uint16_t> sco_connection_handles;
+  std::vector<uint16_t> acl_connection_handles;
+  enterLoopbackMode(sco_connection_handles, acl_connection_handles);
+}
+
+// Enter loopback mode and send single packets.
+TEST_F(BluetoothHidlTest, LoopbackModeSinglePackets) {
+  setBufferSizes();
+  EXPECT_LT(0, max_sco_data_packet_length);
+  EXPECT_LT(0, max_acl_data_packet_length);
+
+  std::vector<uint16_t> sco_connection_handles;
+  std::vector<uint16_t> acl_connection_handles;
+  enterLoopbackMode(sco_connection_handles, acl_connection_handles);
+
+  sendAndCheckHCI(1);
+
+  // This should work, but breaks on some current platforms.  Figure out how to
+  // grandfather older devices but test new ones.
+  int sco_packets_sent = 0;
+  if (0 && sco_connection_handles.size() > 0) {
+    sendAndCheckSCO(1, max_sco_data_packet_length, sco_connection_handles[0]);
+    sco_packets_sent = 1;
+    EXPECT_EQ(sco_packets_sent,
+              wait_for_completed_packets_event(sco_connection_handles[0]));
+  }
+
+  int acl_packets_sent = 0;
+  if (acl_connection_handles.size() > 0) {
+    sendAndCheckACL(1, max_acl_data_packet_length, acl_connection_handles[0]);
+    acl_packets_sent = 1;
+    EXPECT_EQ(acl_packets_sent,
+              wait_for_completed_packets_event(acl_connection_handles[0]));
+  }
+}
+
+// Enter loopback mode and send packets for bandwidth measurements.
+TEST_F(BluetoothHidlTest, LoopbackModeBandwidth) {
+  setBufferSizes();
+
+  std::vector<uint16_t> sco_connection_handles;
+  std::vector<uint16_t> acl_connection_handles;
+  enterLoopbackMode(sco_connection_handles, acl_connection_handles);
+
+  sendAndCheckHCI(NUM_HCI_COMMANDS_BANDWIDTH);
+
+  // This should work, but breaks on some current platforms.  Figure out how to
+  // grandfather older devices but test new ones.
+  int sco_packets_sent = 0;
+  if (0 && sco_connection_handles.size() > 0) {
+    sendAndCheckSCO(NUM_SCO_PACKETS_BANDWIDTH, max_sco_data_packet_length,
+                    sco_connection_handles[0]);
+    sco_packets_sent = NUM_SCO_PACKETS_BANDWIDTH;
+    EXPECT_EQ(sco_packets_sent,
+              wait_for_completed_packets_event(sco_connection_handles[0]));
+  }
+
+  int acl_packets_sent = 0;
+  if (acl_connection_handles.size() > 0) {
+    sendAndCheckACL(NUM_ACL_PACKETS_BANDWIDTH, max_acl_data_packet_length,
+                    acl_connection_handles[0]);
+    acl_packets_sent = NUM_ACL_PACKETS_BANDWIDTH;
+    EXPECT_EQ(acl_packets_sent,
+              wait_for_completed_packets_event(acl_connection_handles[0]));
+  }
+}
+
+int main(int argc, char** argv) {
+  ::testing::AddGlobalTestEnvironment(new BluetoothHidlEnvironment);
+  ::testing::InitGoogleTest(&argc, argv);
+  int status = RUN_ALL_TESTS();
+  ALOGI("Test result = %d", status);
+  return status;
+}
diff --git a/bluetooth/Android.bp b/bluetooth/Android.bp
index bbb3e4b..ed19a37 100644
--- a/bluetooth/Android.bp
+++ b/bluetooth/Android.bp
@@ -1,4 +1,6 @@
 // This is an autogenerated file, do not edit.
 subdirs = [
     "1.0",
+    "1.0/default",
+    "1.0/vts/functional",
 ]
diff --git a/tests/baz/1.0/IBaz.hal b/tests/baz/1.0/IBaz.hal
index 7c5d63a..a2d961a 100644
--- a/tests/baz/1.0/IBaz.hal
+++ b/tests/baz/1.0/IBaz.hal
@@ -52,6 +52,7 @@
 
     callMeLater(IBazCallback cb);
     iAmFreeNow();
+    dieNow();
 
     useAnEnum(SomeEnum zzz) generates (SomeEnum kkk);