Merge "supplicant(interface): Support P2P operations" am: 849d24ccbf am: ef6f1a48af am: c36bc0e8a7
am: a505643770
Change-Id: Ic0c0d571d7bc8674992f7193101edb31c4574874
diff --git a/wifi/supplicant/1.0/ISupplicant.hal b/wifi/supplicant/1.0/ISupplicant.hal
index 64bbd7b..32d73da 100644
--- a/wifi/supplicant/1.0/ISupplicant.hal
+++ b/wifi/supplicant/1.0/ISupplicant.hal
@@ -141,4 +141,19 @@
* @return enabled true if set, false otherwise.
*/
isDebugShowKeysEnabled() generates (bool enabled);
+
+ /**
+ * Set concurrency priority.
+ *
+ * When both P2P and STA mode ifaces are active, this must be used
+ * to prioritize either STA or P2P connection to resolve conflicts
+ * arising during single channel concurrency.
+ *
+ * @param type The type of iface to prioritize.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|
+ */
+ setConcurrencyPriority(IfaceType type) generates (SupplicantStatus status);
};
diff --git a/wifi/supplicant/1.0/ISupplicantP2pIface.hal b/wifi/supplicant/1.0/ISupplicantP2pIface.hal
index 06cd30e..48a4f5b 100644
--- a/wifi/supplicant/1.0/ISupplicantP2pIface.hal
+++ b/wifi/supplicant/1.0/ISupplicantP2pIface.hal
@@ -24,6 +24,36 @@
* interface (e.g p2p0) it controls.
*/
interface ISupplicantP2pIface extends ISupplicantIface {
+ enum WpsProvisionMethod : uint32_t {
+ /**
+ * Push button method.
+ */
+ PBC,
+ /**
+ * Display pin method configuration - pin is generated and displayed on
+ * device.
+ */
+ DISPLAY,
+ /**
+ * Keypad pin method configuration - pin is entered on device.
+ */
+ KEYPAD,
+ /**
+ * Label pin method configuration - pin is labelled on device.
+ */
+ LABEL
+ };
+
+ enum GroupCapabilityMask : uint32_t {
+ GROUP_OWNER = 1 << 0,
+ PERSISTENT_GROUP = 1 << 1,
+ GROUP_LIMIT = 1 << 2,
+ INTRA_BSS_DIST = 1 << 3,
+ CROSS_CONN = 1 << 4,
+ PERSISTENT_RECONN = 1 << 5,
+ GROUP_FORMATION = 1 << 6
+ };
+
/**
* Register for callbacks from this interface.
*
@@ -42,4 +72,419 @@
*/
registerCallback(ISupplicantP2pIfaceCallback callback)
generates (SupplicantStatus status);
+
+ /**
+ * Gets the MAC address of the device.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ * @return deviceAddress MAC address of the device.
+ */
+ getDeviceAddress()
+ generates (SupplicantStatus status, MacAddress deviceAddress);
+
+ /**
+ * Set the postfix to be used for P2P SSID's.
+ *
+ * @param postfix String to be appended to SSID.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ setSsidPostfix(string postfix) generates (SupplicantStatus status);
+
+ /**
+ * Set the Maximum idle time in seconds for P2P groups.
+ * This value controls how long a P2P group is maintained after there
+ * is no other members in the group. As a group owner, this means no
+ * associated stations in the group. As a P2P client, this means no
+ * group owner seen in scan results.
+ *
+ * @param timeoutInSec Timeout value in seconds.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ setGroupIdle(uint32_t timeoutInSec) generates (SupplicantStatus status);
+
+ /**
+ * Turn on/off power save mode for the interface.
+ *
+ * @param enable Indicate if power save is to be turned on/off.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|,
+ * |SupplicantStatusCode.FAILURE_IFACE_DISABLED|
+ */
+ setPowerSave(bool enable) generates (SupplicantStatus status);
+
+ /**
+ * Initiate a P2P service discovery with an optional timeout.
+ *
+ * @param timeoutInSec Max time to be spent is peforming discovery.
+ * Set to 0 to indefinely continue discovery untill and explicit
+ * |stopFind| is sent.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ find(uint32_t timeoutInSec) generates (SupplicantStatus status);
+
+ /**
+ * Stop an ongoing P2P service discovery.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ stopFind() generates (SupplicantStatus status);
+
+ /**
+ * Flush P2P peer table and state.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ flush() generates (SupplicantStatus status);
+
+ /**
+ * Start P2P group formation with a discovered P2P peer. This includes
+ * optional group owner negotiation, group interface setup, provisioning,
+ * and establishing data connection.
+ *
+ * @param peerAddress MAC address of the device to connect to.
+ * @method provisionMethod Provisioning method to use.
+ * @param preSelectedPin Pin to be used, if |provisionMethod| uses one of the
+ * preselected |PIN*| methods.
+ * @param joinExistingGroup Indicates that this is a command to join an
+ * existing group as a client. It skips the group owner negotiation
+ * part. This must send a Provision Discovery Request message to the
+ * target group owner before associating for WPS provisioning.
+ * @param persistent Used to request a persistent group to be formed.
+ * @param goIntent Used to override the default Intent for this group owner
+ * negotiation (Values from 1-15). Refer to section 4.1.6 in
+ * Wi-Fi Peer-to-Peer (P2P) Technical Specification Version 1.7.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ * @return generatedPin Pin generated, if |provisionMethod| uses one of the
+ * generated |PIN*| methods.
+ */
+ connect(MacAddress peerAddress,
+ WpsProvisionMethod provisionMethod,
+ vec<uint8_t> preSelectedPin,
+ bool joinExistingGroup,
+ bool persistent,
+ uint32_t goIntent)
+ generates (SupplicantStatus status, vec<uint8_t> generatedPin);
+
+ /**
+ * Cancel an ongoing P2P group formation and joining-a-group related
+ * operation. This operation unauthorizes the specific peer device (if any
+ * had been authorized to start group formation), stops P2P find (if in
+ * progress), stops pending operations for join-a-group, and removes the
+ * P2P group interface (if one was used) that is in the WPS provisioning
+ * step. If the WPS provisioning step has been completed, the group is not
+ * terminated.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_NOT_STARTED|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ cancelConnect() generates (SupplicantStatus status);
+
+ /**
+ * Send P2P provision discovery request to the specified peer. The
+ * parameters for this command are the P2P device address of the peer and the
+ * desired configuration method.
+ *
+ * @param peerAddress MAC address of the device to send discovery.
+ * @method provisionMethod Provisioning method to use.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ provisionDiscovery(MacAddress peerAddress,
+ WpsProvisionMethod provisionMethod)
+ generates (SupplicantStatus status);
+
+ /**
+ * Set up a P2P group owner manually (i.e., without group owner
+ * negotiation with a specific peer). This is also known as autonomous
+ * group owner. Optional |persistent| may be used to specify restart of a
+ * persistent group.
+ *
+ * @param persistent Used to request a persistent group to be formed.
+ * @param persistentNetworkId Used to specify the restart of a persistent
+ * group.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ addGroup(bool persistent, SupplicantNetworkId persistentNetworkId)
+ generates (SupplicantStatus status);
+
+ /**
+ * Terminate a P2P group. If a new virtual network interface was used for
+ * the group, it must also be removed. The network interface name of the
+ * group interface is used as a parameter for this command.
+ *
+ * @param groupIfName Group interface name to use.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ removeGroup(string groupIfName) generates (SupplicantStatus status);
+
+ /**
+ * Reject connection attempt from a peer (specified with a device
+ * address). This is a mechanism to reject a pending group owner negotiation
+ * with a peer and request to automatically block any further connection or
+ * discovery of the peer.
+ *
+ * @param peerAddress MAC address of the device to reject.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ reject(MacAddress peerAddress) generates (SupplicantStatus status);
+
+ /**
+ * Invite a device to a persistent group.
+ * If the peer device is the group owner of the persistent group, the peer
+ * parameter is not needed. Otherwise it is used to specify which
+ * device to invite. |goDeviceAddress| parameter may be used to override
+ * the group owner device address for Invitation Request should it not be
+ * known for some reason (this should not be needed in most cases).
+ *
+ * @param groupIfName Group interface name to use.
+ * @param goDeviceAddress MAC address of the group owner device.
+ * @param peerAddress MAC address of the device to invite.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ invite(string groupIfName, MacAddress goDeviceAddress, MacAddress peerAddress)
+ generates (SupplicantStatus status);
+
+ /**
+ * Reinvoke a device from a persistent group.
+ *
+ * @param persistentNetworkId Used to specify the persistent group.
+ * @param peerAddress MAC address of the device to reinvoke.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ reinvoke(SupplicantNetworkId persistentNetworkId, MacAddress peerAddress)
+ generates (SupplicantStatus status);
+
+ /**
+ * Configure Extended Listen Timing.
+ *
+ * If enabled, listen state must be entered every |intervalInMillis| for at
+ * least |periodInMillis|. Both values have acceptable range of 1-65535
+ * (with interval obviously having to be larger than or equal to duration).
+ * If the P2P module is not idle at the time the Extended Listen Timing
+ * timeout occurs, the Listen State operation must be skipped.
+ *
+ * @param periodInMillis Period in milliseconds.
+ * @param intervalInMillis Interval in milliseconds.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ configureExtListen(bool enable,
+ uint32_t periodInMillis,
+ uint32_t intervalInMillis)
+ generates (SupplicantStatus status);
+
+ /**
+ * Set P2P Listen channel.
+ *
+ * When specifying a social channel on the 2.4 GHz band (1/6/11) there is no
+ * need to specify the operating class since it defaults to 81. When
+ * specifying a social channel on the 60 GHz band (2), specify the 60 GHz
+ * operating class (180).
+ *
+ * @param channel Wifi channel. eg, 1, 6, 11.
+ * @param operatingClass Operating Class indicates the channel set of the AP
+ * indicated by this BSSID
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ setListenChannel(uint32_t channel, uint32_t operatingClass)
+ generates (SupplicantStatus status);
+
+ /**
+ * Gets the operational SSID of the device.
+ *
+ * @param peerAddress MAC address of the peer.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ * @return ssid SSID of the device
+ */
+ getSsid(MacAddress peerAddress)
+ generates (SupplicantStatus status, Ssid ssid);
+
+ /**
+ * Gets the capability of the group which the device is a
+ * member of.
+ *
+ * @param peerAddress MAC address of the peer.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ * @return capabilityMask Combination of |GroupCapabilityMask| values.
+ */
+ getGroupCapability(MacAddress peerAddress)
+ generates (SupplicantStatus status, uint32_t capabilities);
+
+ /**
+ * This command can be used to add a bonjour service.
+ *
+ * @param query Hex dump of the query data.
+ * @param return Hex dump of the response data.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ addBonjourService(vec<uint8_t> query, vec<uint8_t> response)
+ generates (SupplicantStatus status);
+
+ /**
+ * This command can be used to remove a bonjour service.
+ *
+ * @param query Hex dump of the query data.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NOT_STARTED|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ removeBonjourService(vec<uint8_t> query) generates (SupplicantStatus status);
+
+ /**
+ * This command can be used to add a UPNP service.
+ *
+ * @param version Version to be used.
+ * @package serviceName Service name to be used.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ addUpnpService(uint32_t version, string serviceName)
+ generates (SupplicantStatus status);
+
+ /**
+ * This command can be used to remove a UPNP service.
+ *
+ * @param version Version to be used.
+ * @package serviceName Service name to be used.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_NOT_STARTED|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ removeUpnpService(uint32_t version, string serviceName)
+ generates (SupplicantStatus status);
+
+ /**
+ * This command can be used to flush all services from the
+ * device.
+ *
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ flushServices(uint32_t version, string serviceName)
+ generates (SupplicantStatus status);
+
+ /**
+ * Schedule a P2P service discovery request. The parameters for this command
+ * are the device address of the peer device (or 00:00:00:00:00:00 for
+ * wildcard query that is sent to every discovered P2P peer that supports
+ * service discovery) and P2P Service Query TLV(s) as hexdump.
+ *
+ * @param peerAddress MAC address of the device to discover.
+ * @param query Hex dump of the query data.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ * @return identifier Identifier for the request. Can be used to cancel the
+ * request.
+ */
+ requestServiceDiscovery(MacAddress peerAddress, vec<uint8_t> query)
+ generates (SupplicantStatus status, uint64_t identifier);
+
+ /**
+ * Cancel a previous service discovery request.
+ *
+ * @return identifier Identifier for the request to cancel.
+ * @return status Status of the operation.
+ * Possible status codes:
+ * |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_NOT_STARTED|,
+ * |SupplicantStatusCode.FAILURE_UNKNOWN|,
+ * |SupplicantStatusCode.FAILURE_IFACE_INVALID|
+ */
+ cancelServiceDiscovery(uint64_t identifier)
+ generates (SupplicantStatus status);
};
diff --git a/wifi/supplicant/1.0/ISupplicantStaNetwork.hal b/wifi/supplicant/1.0/ISupplicantStaNetwork.hal
index d159c57..e414a07 100644
--- a/wifi/supplicant/1.0/ISupplicantStaNetwork.hal
+++ b/wifi/supplicant/1.0/ISupplicantStaNetwork.hal
@@ -150,6 +150,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -162,6 +163,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -187,6 +189,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -200,6 +203,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -213,6 +217,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -226,6 +231,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -240,6 +246,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -255,6 +262,7 @@
* |ParamSizeLimits.PSK_PASSPHRASE_MAX_LEN_IN_BYTES|.
* @return status Status of the operation.
* Possible status codes:
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.SUCCESS|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
@@ -273,6 +281,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -287,6 +296,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -313,6 +323,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -327,6 +338,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -340,6 +352,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -353,6 +366,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -366,6 +380,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -379,6 +394,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -391,6 +407,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -403,6 +420,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -415,6 +433,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -427,6 +446,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -439,6 +459,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -464,6 +485,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/
@@ -476,6 +498,7 @@
* @return status Status of the operation.
* Possible status codes:
* |SupplicantStatusCode.SUCCESS|,
+ * |SupplicantStatusCode.FAILURE_ARGS_INVALID|,
* |SupplicantStatusCode.FAILURE_UNKNOWN|,
* |SupplicantStatusCode.FAILURE_NETWORK_INVALID|
*/