diff --git a/alsa_sound/Android.mk b/alsa_sound/Android.mk
index 656758c..9c04a44 100644
--- a/alsa_sound/Android.mk
+++ b/alsa_sound/Android.mk
@@ -103,15 +103,6 @@
 include $(BUILD_SHARED_LIBRARY)
 endif
 
-# Load audio_policy.conf to system/etc/
-include $(CLEAR_VARS)
-LOCAL_MODULE       := audio_policy.conf
-LOCAL_MODULE_TAGS  := optional
-LOCAL_MODULE_CLASS := ETC
-LOCAL_MODULE_PATH  := $(TARGET_OUT_ETC)/
-LOCAL_SRC_FILES    := audio_policy.conf
-include $(BUILD_PREBUILT)
-
 # This is the ALSA module which behaves closely like the original
 
 include $(CLEAR_VARS)
diff --git a/alsa_sound/CleanSpec.mk b/alsa_sound/CleanSpec.mk
new file mode 100755
index 0000000..d2bc78b
--- /dev/null
+++ b/alsa_sound/CleanSpec.mk
@@ -0,0 +1,51 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list.  These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list.  E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+
+$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/audio_policy.conf)
+
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
diff --git a/alsa_sound/audio_policy.conf b/alsa_sound/audio_policy.conf
deleted file mode 100644
index be2da9d..0000000
--- a/alsa_sound/audio_policy.conf
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# Audio policy configuration for generic device builds (goldfish audio HAL - emulator)
-#
-
-# Global configuration section: lists input and output devices always present on the device
-# as well as the output device selected by default.
-# Devices are designated by a string that corresponds to the enum in audio.h
-
-global_configuration {
-  attached_output_devices AUDIO_DEVICE_OUT_SPEAKER
-  default_output_device AUDIO_DEVICE_OUT_SPEAKER
-  attached_input_devices AUDIO_DEVICE_IN_BUILTIN_MIC
-}
-
-# audio hardware module section: contains descriptors for all audio hw modules present on the
-# device. Each hw module node is named after the corresponding hw module library base name.
-# For instance, "primary" corresponds to audio.primary.<device>.so.
-# The "primary" module is mandatory and must include at least one output with
-# AUDIO_OUTPUT_FLAG_PRIMARY flag.
-# Each module descriptor contains one or more output profile descriptors and zero or more
-# input profile descriptors. Each profile lists all the parameters supported by a given output
-# or input stream category.
-# The "channel_masks", "formats", "devices" and "flags" are specified using strings corresponding
-# to enums in audio.h and audio_policy.h. They are concatenated by use of "|" without space or "\n".
-
-audio_hw_modules {
-  primary {
-    outputs {
-      primary {
-        sampling_rates 44100|48000
-        channel_masks AUDIO_CHANNEL_OUT_STEREO
-        formats AUDIO_FORMAT_PCM_16_BIT
-        devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL
-        flags AUDIO_OUTPUT_FLAG_PRIMARY
-      }
-      deep_buffer {
-        sampling_rates 8000|11025|12000|16000|22050|24000|32000|44100|48000
-        channel_masks AUDIO_CHANNEL_OUT_STEREO
-        formats AUDIO_FORMAT_PCM_16_BIT
-        devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_AUX_DIGITAL
-        flags AUDIO_OUTPUT_FLAG_DEEP_BUFFER
-      }
-    }
-    inputs {
-      primary {
-        sampling_rates 8000|11025|12000|16000|22050|24000|32000|44100|48000
-        channel_masks AUDIO_CHANNEL_IN_MONO|AUDIO_CHANNEL_IN_STEREO
-        formats AUDIO_FORMAT_PCM_16_BIT
-        devices AUDIO_DEVICE_IN_BUILTIN_MIC|AUDIO_DEVICE_IN_WIRED_HEADSET|AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET|AUDIO_DEVICE_IN_AUX_DIGITAL|AUDIO_DEVICE_IN_VOICE_CALL
-      }
-    }
-  }
-}