hal: enable form factor based configuration
- for 8996 enable form factor based mixer path configuration
Change-Id: I75bf501ebafde9c43a473a6a3c8a8d70644073f7
diff --git a/hal/msm8974/hw_info.c b/hal/msm8974/hw_info.c
new file mode 100644
index 0000000..52ae974
--- /dev/null
+++ b/hal/msm8974/hw_info.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "hardware_info"
+/*#define LOG_NDEBUG 0*/
+#define LOG_NDDEBUG 0
+
+#include <stdlib.h>
+#include <cutils/log.h>
+#include "audio_hw.h"
+#include "platform.h"
+#include "audio_extn.h"
+
+struct hardware_info {
+ char name[HW_INFO_ARRAY_MAX_SIZE];
+ char type[HW_INFO_ARRAY_MAX_SIZE];
+ /* variables for handling target variants */
+ uint32_t num_snd_devices;
+ char dev_extn[HW_INFO_ARRAY_MAX_SIZE];
+ snd_device_t *snd_devices;
+};
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+
+
+static const snd_device_t tasha_db_variant_devices[] = {
+ SND_DEVICE_OUT_SPEAKER
+};
+
+static const snd_device_t tasha_fluid_variant_devices[] = {
+ SND_DEVICE_OUT_SPEAKER,
+ SND_DEVICE_OUT_SPEAKER_AND_HEADPHONES,
+ SND_DEVICE_OUT_VOICE_SPEAKER,
+ SND_DEVICE_OUT_SPEAKER_AND_HDMI,
+ SND_DEVICE_OUT_SPEAKER_PROTECTED,
+ SND_DEVICE_OUT_VOICE_SPEAKER_PROTECTED,
+};
+
+static const snd_device_t tasha_liquid_variant_devices[] = {
+ SND_DEVICE_OUT_SPEAKER,
+ SND_DEVICE_OUT_SPEAKER_AND_HEADPHONES,
+ SND_DEVICE_IN_SPEAKER_MIC,
+ SND_DEVICE_IN_HEADSET_MIC,
+ SND_DEVICE_IN_VOICE_DMIC,
+ SND_DEVICE_IN_VOICE_SPEAKER_DMIC,
+ SND_DEVICE_IN_VOICE_REC_DMIC_STEREO,
+ SND_DEVICE_IN_VOICE_REC_DMIC_FLUENCE,
+ SND_DEVICE_IN_QUAD_MIC,
+};
+
+struct snd_card_split cur_snd_card_split = {
+ .device = {0},
+ .snd_card = {0},
+ .form_factor = {0},
+};
+
+static void update_hardware_info_8996(struct hardware_info *hw_info)
+{
+ struct snd_card_split *tmp_handle = get_snd_card_split();
+ ALOGV("%s: device %s snd_card %s form_factor %s",
+ __func__, tmp_handle->device, tmp_handle->snd_card, tmp_handle->form_factor);
+
+ strlcpy(hw_info->name, tmp_handle->device, sizeof(hw_info->name));
+ snprintf(hw_info->type, sizeof(hw_info->type), " %s", tmp_handle->form_factor);
+ snprintf(hw_info->dev_extn, sizeof(hw_info->dev_extn), "-%s", tmp_handle->form_factor);
+
+ if (!strncmp(tmp_handle->form_factor, "fluid", sizeof("fluid"))) {
+ hw_info->snd_devices = (snd_device_t *)tasha_fluid_variant_devices;
+ hw_info->num_snd_devices = ARRAY_SIZE(tasha_fluid_variant_devices);
+ } else if (!strncmp(tmp_handle->form_factor, "liquid", sizeof("liquid"))) {
+ hw_info->snd_devices = (snd_device_t *)tasha_liquid_variant_devices;
+ hw_info->num_snd_devices = ARRAY_SIZE(tasha_liquid_variant_devices);
+ } else if (!strncmp(tmp_handle->form_factor, "db", sizeof("db"))) {
+ hw_info->snd_devices = (snd_device_t *)tasha_db_variant_devices;
+ hw_info->num_snd_devices = ARRAY_SIZE(tasha_db_variant_devices);
+ } else {
+ ALOGW("%s: %s form factor doesnt need mixer path over ride", __func__, tmp_handle->form_factor);
+ }
+
+ ALOGV("name %s type %s dev_extn %s", hw_info->name, hw_info->type, hw_info->dev_extn);
+}
+
+
+void *hw_info_init(const char *snd_card_name)
+{
+ struct hardware_info *hw_info = NULL;
+ bool hw_supported = false;
+
+ if (strstr(snd_card_name, "msm8996")) {
+ ALOGD("8996 - variant soundcard");
+ hw_supported = true;
+ } else {
+ ALOGE("%s: Unsupported target %s:",__func__, snd_card_name);
+ }
+
+ if (hw_supported) {
+ hw_info = malloc(sizeof(struct hardware_info));
+ if (!hw_info) {
+ ALOGE("failed to allocate mem for hardware info");
+ goto on_finish;
+ }
+
+ hw_info->snd_devices = NULL;
+ hw_info->num_snd_devices = 0;
+ strlcpy(hw_info->dev_extn, "", sizeof(hw_info->dev_extn));
+ strlcpy(hw_info->type, "", sizeof(hw_info->type));
+ strlcpy(hw_info->name, "", sizeof(hw_info->name));
+ update_hardware_info_8996(hw_info);
+ }
+
+on_finish:
+ return hw_info;
+}
+
+void hw_info_deinit(void *hw_info)
+{
+ free(hw_info);
+}
+
+void hw_info_append_hw_type(void *hw_info, snd_device_t snd_device,
+ char *device_name)
+{
+ struct hardware_info *my_data = (struct hardware_info*) hw_info;
+ uint32_t i = 0;
+
+ snd_device_t *snd_devices =
+ (snd_device_t *) my_data->snd_devices;
+
+ if (snd_devices != NULL) {
+ for (i = 0; i < my_data->num_snd_devices; i++) {
+ if (snd_device == (snd_device_t)snd_devices[i]) {
+ ALOGV("extract dev_extn device %d, device_name %s extn = %s ",
+ (snd_device_t)snd_devices[i], device_name, my_data->dev_extn);
+ CHECK(strlcat(device_name, my_data->dev_extn,
+ DEVICE_NAME_MAX_SIZE) < DEVICE_NAME_MAX_SIZE);
+ break;
+ }
+ }
+ }
+ ALOGD("%s : device_name = %s", __func__,device_name);
+}
+
+struct snd_card_split *get_snd_card_split()
+{
+ return &cur_snd_card_split;
+}
+
+void set_snd_card_split(const char* in_snd_card_name)
+{
+ /* sound card name follows below mentioned convention
+ <target name>-<sound card name>-<form factor>-snd-card
+ parse target name, sound card name and form factor
+ */
+ char *snd_card_name = strdup(in_snd_card_name);
+ char *tmp = NULL;
+ char *device = NULL;
+ char *snd_card = NULL;
+ char *form_factor = NULL;
+
+ if (in_snd_card_name == NULL) {
+ ALOGE("%s: snd_card_name passed is NULL", __func__);
+ goto on_error;
+ }
+
+ device = strtok_r(snd_card_name, "-", &tmp);
+ if (device == NULL) {
+ ALOGE("%s: called on invalid snd card name", __func__);
+ goto on_error;
+ }
+ strlcpy(cur_snd_card_split.device, device, HW_INFO_ARRAY_MAX_SIZE);
+
+ snd_card = strtok_r(NULL, "-", &tmp);
+ if (snd_card == NULL) {
+ ALOGE("%s: called on invalid snd card name", __func__);
+ goto on_error;
+ }
+ strlcpy(cur_snd_card_split.snd_card, snd_card, HW_INFO_ARRAY_MAX_SIZE);
+
+ form_factor = strtok_r(NULL, "-", &tmp);
+ if (form_factor == NULL) {
+ ALOGE("%s: called on invalid snd card name", __func__);
+ goto on_error;
+ }
+ strlcpy(cur_snd_card_split.form_factor, form_factor, HW_INFO_ARRAY_MAX_SIZE);
+
+ ALOGV("%s: snd_card_name(%s) device(%s) snd_card(%s) form_factor(%s)",
+ __func__, in_snd_card_name, device, snd_card, form_factor);
+
+on_error:
+ if (snd_card_name)
+ free(snd_card_name);
+}
+
diff --git a/hal/msm8974/platform.c b/hal/msm8974/platform.c
index 49e6801..7dc755c 100644
--- a/hal/msm8974/platform.c
+++ b/hal/msm8974/platform.c
@@ -129,6 +129,8 @@
char *snd_card_name;
int max_vol_index;
int max_mic_count;
+
+ void *hw_info;
};
static int pcm_device_table[AUDIO_USECASE_MAX][2] = {
@@ -932,7 +934,8 @@
char *snd_internal_name = NULL;
char *tmp = NULL;
char mixer_xml_file[MIXER_PATH_MAX_LENGTH]= {0};
-
+ char platform_info_file[MIXER_PATH_MAX_LENGTH]= {0};
+ struct snd_card_split *snd_split_handle = NULL;
my_data = calloc(1, sizeof(struct platform_data));
my_data->adev = adev;
@@ -941,9 +944,6 @@
set_platform_defaults(my_data);
- /* Initialize platform specific ids and/or backends*/
- platform_info_init(my_data);
-
while (snd_card_num < MAX_SND_CARD) {
adev->mixer = mixer_open(snd_card_num);
@@ -973,41 +973,67 @@
continue;
}
- if ((snd_internal_name = strtok_r(snd_card_name, "-", &tmp)) != NULL) {
- /* Get the codec internal name from the sound card name
- * and form the mixer paths file name dynamically. This
- * is generic way of picking any codec name based mixer
- * files in future with no code change. This code
- * assumes mixer files are formed with format as
- * mixer_paths_internalcodecname.xml
+ set_snd_card_split(snd_card_name);
+ snd_split_handle = get_snd_card_split();
- * If this dynamically read mixer files fails to open then it
- * falls back to default mixer file i.e mixer_paths.xml. This is
- * done to preserve backward compatibility but not mandatory as
- * long as the mixer files are named as per above assumption.
- */
+ my_data->hw_info = hw_info_init(snd_card_name);
- if ((snd_internal_name = strtok_r(NULL, "-", &tmp)) != NULL) {
- // need to carryforward old file name
- if (!strncmp(snd_card_name, TOMTOM_8226_SND_CARD_NAME,
+ /* Get the codec internal name from the sound card and/or form factor
+ * name and form the mixer paths and platfor info file name dynamically.
+ * This is generic way of picking any codec and forma factor name based
+ * mixer and platform info files in future with no code change.
+
+ * current code extends and looks for any of the exteneded mixer path and
+ * platform info file present based on codec and form factor.
+
+ * order of picking appropriate file is
+ * <i> mixer_paths_<codec_name>_<form_factor>.xml, if file not present
+ * <ii> mixer_paths_<codec_name>.xml, if file not present
+ * <iii> mixer_paths.xml
+
+ * same order is followed for audio_platform_info.xml as well
+ */
+
+ // need to carryforward old file name
+ if (!strncmp(snd_card_name, TOMTOM_8226_SND_CARD_NAME,
sizeof(TOMTOM_8226_SND_CARD_NAME))) {
- snprintf(mixer_xml_file, sizeof(mixer_xml_file), "%s_%s.xml",
+ snprintf(mixer_xml_file, sizeof(mixer_xml_file), "%s_%s.xml",
MIXER_XML_BASE_STRING, TOMTOM_MIXER_FILE_SUFFIX );
- } else {
- snprintf(mixer_xml_file, sizeof(mixer_xml_file), "%s_%s.xml",
- MIXER_XML_BASE_STRING, snd_internal_name);
- }
+ } else {
- if (F_OK == access(mixer_xml_file, 0)) {
- use_default_mixer_path = false;
+ snprintf(mixer_xml_file, sizeof(mixer_xml_file), "%s_%s_%s.xml",
+ MIXER_XML_BASE_STRING, snd_split_handle->snd_card,
+ snd_split_handle->form_factor);
+
+ if (F_OK != access(mixer_xml_file, 0)) {
+ memset(mixer_xml_file, 0, sizeof(mixer_xml_file));
+ snprintf(mixer_xml_file, sizeof(mixer_xml_file), "%s_%s.xml",
+ MIXER_XML_BASE_STRING, snd_split_handle->snd_card);
+
+ if (F_OK != access(mixer_xml_file, 0)) {
+ memset(mixer_xml_file, 0, sizeof(mixer_xml_file));
+ strlcpy(mixer_xml_file, MIXER_XML_DEFAULT_PATH, MIXER_PATH_MAX_LENGTH);
+ }
+ }
+
+ snprintf(platform_info_file, sizeof(platform_info_file), "%s_%s_%s.xml",
+ PLATFORM_INFO_XML_BASE_STRING, snd_split_handle->snd_card,
+ snd_split_handle->form_factor);
+
+ if (F_OK != access(platform_info_file, 0)) {
+ memset(platform_info_file, 0, sizeof(platform_info_file));
+ snprintf(platform_info_file, sizeof(platform_info_file), "%s_%s.xml",
+ PLATFORM_INFO_XML_BASE_STRING, snd_split_handle->snd_card);
+
+ if (F_OK != access(platform_info_file, 0)) {
+ memset(platform_info_file, 0, sizeof(platform_info_file));
+ strlcpy(platform_info_file, PLATFORM_INFO_XML_PATH, MIXER_PATH_MAX_LENGTH);
}
}
}
- if (use_default_mixer_path) {
- memset(mixer_xml_file, 0, sizeof(mixer_xml_file));
- strlcpy(mixer_xml_file, MIXER_XML_DEFAULT_PATH, MIXER_PATH_MAX_LENGTH);
- }
+ /* Initialize platform specific ids and/or backends*/
+ platform_info_init(platform_info_file, my_data);
ALOGD("%s: Loading mixer file: %s", __func__, mixer_xml_file);
adev->audio_route = audio_route_init(snd_card_num, mixer_xml_file);
@@ -1195,6 +1221,8 @@
struct platform_data *my_data = (struct platform_data *)platform;
close_csd_client(my_data->csd);
+ hw_info_deinit(my_data->hw_info);
+
for (dev = 0; dev < SND_DEVICE_MAX; dev++) {
if (backend_tag_table[dev])
free(backend_tag_table[dev]);
@@ -1239,6 +1267,29 @@
return "none";
}
+int platform_get_snd_device_name_extn(void *platform, snd_device_t snd_device,
+ char *device_name)
+{
+ struct platform_data *my_data = (struct platform_data *)platform;
+
+ if (platform == NULL || device_name == NULL) {
+ ALOGW("%s: something wrong, use legacy get_snd_device name", __func__);
+ device_name = platform_get_snd_device_name(snd_device);
+ } else if (snd_device >= SND_DEVICE_MIN && snd_device < SND_DEVICE_MAX) {
+ if (operator_specific_device_table[snd_device] != NULL) {
+ strlcpy(device_name, get_operator_specific_device_mixer_path(snd_device),
+ DEVICE_NAME_MAX_SIZE);
+ } else {
+ strlcpy(device_name, device_table[snd_device], DEVICE_NAME_MAX_SIZE);
+ }
+ hw_info_append_hw_type(my_data->hw_info, snd_device, device_name);
+ } else {
+ strlcpy(device_name, "none", DEVICE_NAME_MAX_SIZE);
+ }
+
+ return 0;
+}
+
void platform_add_backend_name(void *platform, char *mixer_path,
snd_device_t snd_device)
{
diff --git a/hal/msm8974/platform.h b/hal/msm8974/platform.h
index d6c9e8e..53474f6 100644
--- a/hal/msm8974/platform.h
+++ b/hal/msm8974/platform.h
@@ -149,6 +149,9 @@
};
+#define DEVICE_NAME_MAX_SIZE 128
+#define HW_INFO_ARRAY_MAX_SIZE 32
+
#define DEFAULT_OUTPUT_SAMPLING_RATE 48000
#define ALL_SESSION_VSID 0xFFFFFFFF
@@ -303,4 +306,6 @@
get_sample_rate_t get_sample_rate;
};
+#define PLATFORM_INFO_XML_PATH "/system/etc/audio_platform_info.xml"
+#define PLATFORM_INFO_XML_BASE_STRING "/system/etc/audio_platform_info"
#endif // QCOM_AUDIO_PLATFORM_H