diff --git a/configs/msm8937/mixer_paths_sdm439_pm8953.xml b/configs/msm8937/mixer_paths_sdm439_pm8953.xml
index 5099fff..328701c 100644
--- a/configs/msm8937/mixer_paths_sdm439_pm8953.xml
+++ b/configs/msm8937/mixer_paths_sdm439_pm8953.xml
@@ -1255,12 +1255,17 @@
         <ctl name="HPHR" value="Switch" />
     </path>
 
-    <path name="headset-mic">
+    <path name="headset-mic-default">
         <path name="adc2" />
         <ctl name="ADC2 MUX" value="INP2" />
         <ctl name="IIR1 INP1 MUX" value="DEC1" />
     </path>
 
+    <path name="headset-mic">
+        <path name="headset-mic-default" />
+        <ctl name="DEC1 Volume" value="74" />
+    </path>
+
     <path name="sidetone-iir">
         <ctl name="IIR1 Enable Band1" value="1" />
         <ctl name="IIR1 Enable Band2" value="1" />
@@ -1304,7 +1309,7 @@
     </path>
 
     <path name="voice-headset-mic">
-        <path name="headset-mic" />
+        <path name="headset-mic-default" />
     </path>
 
     <path name="speaker-and-headphones">
diff --git a/configs/msmnile/mixer_paths_tavil.xml b/configs/msmnile/mixer_paths_tavil.xml
index b2c8be2..381264c 100644
--- a/configs/msmnile/mixer_paths_tavil.xml
+++ b/configs/msmnile/mixer_paths_tavil.xml
@@ -2709,6 +2709,7 @@
     <path name="voice-tty-full-headset-mic">
         <path name="amic2" />
         <ctl name="ADC2 Volume" value="0" />
+        <ctl name="DEC0 Volume" value="84" />
     </path>
 
     <path name="voice-tty-hco-headset-mic">
diff --git a/configs/msmsteppe/sound_trigger_platform_info.xml b/configs/msmsteppe/sound_trigger_platform_info.xml
index ed9c08d..ff4152f 100644
--- a/configs/msmsteppe/sound_trigger_platform_info.xml
+++ b/configs/msmsteppe/sound_trigger_platform_info.xml
@@ -44,9 +44,13 @@
         <param transit_to_adsp_on_battery_charging="false" />
         <!-- Below backend params must match with port used in mixer path file -->
         <!-- param used to configure backend sample rate, format and channels -->
+        <!-- uncomment TX_CDC_DMA_TX_3 values for internal codec and comment SLIM_0_TX values -->
         <param backend_port_name="SLIM_0_TX" />
+        <!-- param backend_port_name="TX_CDC_DMA_TX_3" /-->
         <!-- Param used to match and obtain device backend index -->
         <param backend_dai_name="SLIMBUS_0_TX" />
+        <!-- param backend_dai_name="TX_CDC_DMA_TX_3" /-->
+
     </common_config>
     <acdb_ids>
         <param DEVICE_HANDSET_MIC_APE="100" />
@@ -58,6 +62,7 @@
         <param DEVICE_HEADSET_MIC_CPE="139" />
         <param DEVICE_HANDSET_DMIC_APE="149" />
         <param DEVICE_HANDSET_DMIC_CPE="153" />
+        <param DEVICE_HANDSET_TMIC_APE="157" />
     </acdb_ids>
     <!-- Multiple sound_model_config tags can be listed, each with unique   -->
     <!-- vendor_uuid. The below tag represents QTI SVA engine sound model   -->
@@ -76,10 +81,10 @@
         <param out_channels="1"/> <!-- Module output channels -->
         <!-- adm_cfg_profile should match with the one defined under adm_config -->
         <!-- Set it to NONE if LSM directly connects to AFE -->
-        <param adm_cfg_profile="NONE" />
+        <param adm_cfg_profile="FFECNS" />
         <!-- fluence_type: "FLUENCE", "FLUENCE_DMIC", "FLUENCE_TMIC", -->
         <!-- "FLUENCE_QMIC". param value is valid when adm_cfg_profile="FLUENCE"-->
-        <param fluence_type="FLUENCE_DMIC" />
+        <param fluence_type="FLUENCE_TMIC" />
         <!-- wdsp_fluence_type: fluence disabled: "NONE" -->
         <!-- fluence enabled: "FLUENCE_DMIC", "FLUENCE_TMIC", "FLUENCE_QMIC" -->
         <param wdsp_fluence_type="NONE" />
@@ -128,7 +133,7 @@
         <lsm_usecase>
             <param execution_mode="ADSP" />
             <param app_type="2" /> <!-- app type used in ACDB -->
-            <param in_channels="1"/> <!-- Module input channels -->
+            <param in_channels="5"/> <!-- Module input channels -->
             <param load_sound_model_ids="0x00012C1C, 0x00012C14" />
             <param unload_sound_model_ids="0x00012C1C, 0x00012C15" />
             <param confidence_levels_ids="0x00012C1C, 0x00012C07" />
@@ -310,6 +315,14 @@
         <param bit_width="16" />
     </adm_config>
 
+    <adm_config>
+        <param adm_cfg_profile="FFECNS" />
+        <param app_type="69947" />
+        <param sample_rate="16000" />
+        <param bit_width="16" />
+        <param out_channels="5"/>
+    </adm_config>
+
     <!-- backend_type tag defines backend type for each device -->
     <!-- Default value is assumed for devices that are not listed here -->
     <backend_type>