diff --git a/configs/kona/sound_trigger_platform_info.xml b/configs/kona/sound_trigger_platform_info.xml
index 18f15ff..09ebdce 100644
--- a/configs/kona/sound_trigger_platform_info.xml
+++ b/configs/kona/sound_trigger_platform_info.xml
@@ -40,9 +40,7 @@
         <param max_ape_sessions="8" />
         <param enable_failure_detection="false" />
         <param support_device_switch="false" />
-        <!-- Transition will only occur if execution_type="DYNAMIC" -->
-        <param transit_to_adsp_on_playback="false" />
-        <param transit_to_adsp_on_battery_charging="false" />
+        <param transit_to_non_lpi_on_battery_charging="false" />
         <!-- Below backend params must match with port used in mixer path file -->
         <!-- param used to configure backend sample rate, format and channels -->
         <param backend_port_name="VA_CDC_DMA_TX_0" />
@@ -50,6 +48,7 @@
         <param backend_dai_name="VA_CDC_DMA_TX_0" />
         <!-- Param used to indicate if SVA has dedicated SLIM ports -->
         <param dedicated_sva_path="true" />
+        <param disable_lpi_budget="true" />
     </common_config>
     <acdb_ids>
         <param DEVICE_HANDSET_MIC_APE="100" />
@@ -212,6 +211,7 @@
         <param sample_rate="16000" />
         <param bit_width="16" />
         <param out_channels="1"/> <!-- Module output channels -->
+        <param lpi_enable="true" />
         <lsm_usecase>
             <param capture_device="HANDSET" />
             <!-- adm_cfg_profile should match with the one defined under adm_config -->
@@ -259,9 +259,52 @@
         <param vendor_uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" />
         <param execution_type="ADSP" /> <!-- value: "ADSP" "DYNAMIC" -->
         <param library="none" />
+        <param max_ape_phrases="1" />
+        <param max_ape_users="1" />
+        <!-- Profile specific data which the algorithm can support -->
+        <param sample_rate="16000" />
+        <param bit_width="16" />
+        <param out_channels="1"/> <!-- Module output channels -->
+        <param lpi_enable="true" />
+        <lsm_usecase>
+            <param capture_device="HANDSET" />
+            <!-- adm_cfg_profile should match with the one defined under adm_config -->
+            <!-- Set it to NONE if LSM directly connects to AFE -->
+            <param adm_cfg_profile="NONE" />
+            <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC"   -->
+            <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile -->
+            <!-- is FFECNS -->
+            <param fluence_type="NONE" />
+            <param execution_mode="ADSP" />
+            <param app_type="3" /> <!-- app type used in ACDB -->
+            <param in_channels="1"/> <!-- Module input channels -->
+            <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" />
+            <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" />
+            <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" />
+            <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" />
+            <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" />
+            <param custom_config_ids="0x18000001, 0x0, 0x00012C20" />
+        </lsm_usecase>
+        <lsm_usecase>
+            <param capture_device="HEADSET" />
+            <param adm_cfg_profile="NONE" />
+            <param fluence_type="NONE" />
+            <param execution_mode="ADSP" />
+            <param app_type="3" /> <!-- app type used in ACDB -->
+            <param in_channels="1"/> <!-- Module input channels -->
+            <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" />
+            <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" />
+            <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" />
+            <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" />
+            <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" />
+            <param custom_config_ids="0x18000001, 0x0, 0x00012C20" />
+        </lsm_usecase>
+
+        <!-- format: "ADPCM_packet" or "PCM_packet" !-->
+        <!-- transfer_mode: "FTRT" or "RT" -->
         <!--  kw_duration is in milli seconds. It is valid only for FTRT
             transfer mode -->
-        <param capture_keyword="MULAW_raw, FTRT, 5000" />
+        <param capture_keyword="PCM_raw, FTRT, 5000" />
         <param client_capture_read_delay="2000" />
     </sound_model_config>