liboverlay: Add support for MDSS Rotator.
Acked-by: Sushil Chauhan <sushilchauhan@codeaurora.org>
Change-Id: I60a2b0ce2b491d03b2b1a04966113e253b7f3dd8
diff --git a/liboverlay/mdssRotator.cpp b/liboverlay/mdssRotator.cpp
new file mode 100755
index 0000000..16b866a
--- /dev/null
+++ b/liboverlay/mdssRotator.cpp
@@ -0,0 +1,211 @@
+/*
+* Copyright (C) 2008 The Android Open Source Project
+* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+
+#include "overlayUtils.h"
+#include "overlayRotator.h"
+
+namespace ovutils = overlay::utils;
+
+namespace overlay {
+
+bool MdssRot::init() {
+ if(!utils::openDev(mFd, 0, Res::fbPath, O_RDWR)) {
+ ALOGE("MdssRot failed to init fb0");
+ return false;
+ }
+ return true;
+}
+
+void MdssRot::setSource(const overlay::utils::Whf& awhf) {
+ utils::Whf whf(awhf);
+
+ mRotInfo.src.format = whf.format;
+ if(whf.format == MDP_Y_CRCB_H2V2_TILE ||
+ whf.format == MDP_Y_CBCR_H2V2_TILE) {
+ whf.w = utils::alignup(awhf.w, 64);
+ whf.h = utils::alignup(awhf.h, 32);
+ }
+
+ mRotInfo.src.width = whf.w;
+ mRotInfo.src.height = whf.h;
+
+ mRotInfo.src_rect.w = whf.w;
+ mRotInfo.src_rect.h = whf.h;
+
+ mRotInfo.dst_rect.w = whf.w;
+ mRotInfo.dst_rect.h = whf.h;
+
+ mBufSize = awhf.size;
+}
+
+void MdssRot::setFlags(const utils::eMdpFlags& flags) {
+ // TODO
+}
+
+void MdssRot::setTransform(const utils::eTransform& rot, const bool& rotUsed)
+{
+ int flags = utils::getMdpOrient(rot);
+ if (flags != -1)
+ setRotations(flags);
+ //getMdpOrient will switch the flips if the source is 90 rotated.
+ //Clients in Android dont factor in 90 rotation while deciding the flip.
+ mOrientation = static_cast<utils::eTransform>(flags);
+ ALOGE_IF(DEBUG_OVERLAY, "%s: rot=%d", __FUNCTION__, flags);
+
+ setDisable();
+ if(rotUsed) {
+ setEnable();
+ }
+}
+
+void MdssRot::doTransform() {
+ if(mOrientation & utils::OVERLAY_TRANSFORM_ROT_90)
+ utils::swap(mRotInfo.dst_rect.w, mRotInfo.dst_rect.h);
+}
+
+bool MdssRot::commit() {
+ doTransform();
+ mRotInfo.flags |= MDSS_MDP_ROT_ONLY;
+ if(!overlay::mdp_wrapper::setOverlay(mFd.getFD(), mRotInfo)) {
+ ALOGE("MdssRot commit failed!");
+ dump();
+ return false;
+ }
+ mRotData.id = mRotInfo.id;
+ return true;
+}
+
+bool MdssRot::queueBuffer(int fd, uint32_t offset) {
+ if(enabled()) {
+ mRotData.data.memory_id = fd;
+ mRotData.data.offset = offset;
+
+ remap(RotMem::Mem::ROT_NUM_BUFS);
+ OVASSERT(mMem.curr().m.numBufs(), "queueBuffer numbufs is 0");
+
+ mRotData.dst_data.offset =
+ mMem.curr().mRotOffset[mMem.curr().mCurrOffset];
+ mMem.curr().mCurrOffset =
+ (mMem.curr().mCurrOffset + 1) % mMem.curr().m.numBufs();
+
+ if(!overlay::mdp_wrapper::play(mFd.getFD(), mRotData)) {
+ ALOGE("MdssRot play failed!");
+ dump();
+ return false;
+ }
+
+ // if the prev mem is valid, we need to close
+ if(mMem.prev().valid()) {
+ // FIXME if no wait for vsync the above
+ // play will return immediatly and might cause
+ // tearing when prev.close is called.
+ if(!mMem.prev().close()) {
+ ALOGE("%s error in closing prev rot mem", __FUNCTION__);
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
+bool MdssRot::open_i(uint32_t numbufs, uint32_t bufsz)
+{
+ OvMem mem;
+ OVASSERT(MAP_FAILED == mem.addr(), "MAP failed in open_i");
+
+ if(!mem.open(numbufs, bufsz, false)){ // TODO: secure for badger
+ ALOGE("%s: Failed to open", __func__);
+ mem.close();
+ return false;
+ }
+
+ OVASSERT(MAP_FAILED != mem.addr(), "MAP failed");
+ OVASSERT(mem.getFD() != -1, "getFd is -1");
+
+ mRotData.dst_data.memory_id = mem.getFD();
+ mRotData.dst_data.offset = 0;
+ mMem.curr().m = mem;
+ return true;
+}
+
+bool MdssRot::remap(uint32_t numbufs) {
+ // if current size changed, remap
+ if(mBufSize == mMem.curr().size()) {
+ ALOGE_IF(DEBUG_OVERLAY, "%s: same size %d", __FUNCTION__, mBufSize);
+ return true;
+ }
+
+ ALOGE_IF(DEBUG_OVERLAY, "%s: size changed - remapping", __FUNCTION__);
+ OVASSERT(!mMem.prev().valid(), "Prev should not be valid");
+
+ // ++mMem will make curr to be prev, and prev will be curr
+ ++mMem;
+ if(!open_i(numbufs, mBufSize)) {
+ ALOGE("%s Error could not open", __FUNCTION__);
+ return false;
+ }
+ for (uint32_t i = 0; i < numbufs; ++i) {
+ mMem.curr().mRotOffset[i] = i * mBufSize;
+ }
+ return true;
+}
+
+bool MdssRot::close() {
+ bool success = true;
+ if(mFd.valid() && (getSessId() > 0)) {
+ if(!mdp_wrapper::unsetOverlay(mFd.getFD(), getSessId())) {
+ ALOGE("MdssRot::close unsetOverlay failed, fd=%d sessId=%d",
+ mFd.getFD(), getSessId());
+ success = false;
+ }
+ }
+
+ if (!mFd.close()) {
+ ALOGE("Mdss Rot error closing fd");
+ success = false;
+ }
+ if (!mMem.close()) {
+ ALOGE("Mdss Rot error closing mem");
+ success = false;
+ }
+ reset();
+ return success;
+}
+
+void MdssRot::reset() {
+ ovutils::memset0(mRotInfo);
+ ovutils::memset0(mRotData);
+ mRotData.data.memory_id = -1;
+ mRotInfo.id = MSMFB_NEW_REQUEST;
+ ovutils::memset0(mMem.curr().mRotOffset);
+ ovutils::memset0(mMem.prev().mRotOffset);
+ mMem.curr().mCurrOffset = 0;
+ mMem.prev().mCurrOffset = 0;
+ mBufSize = 0;
+ mOrientation = utils::OVERLAY_TRANSFORM_0;
+}
+
+void MdssRot::dump() const {
+ ALOGE("== Dump MdssRot start ==");
+ mFd.dump();
+ mMem.curr().m.dump();
+ mdp_wrapper::dump("mRotInfo", mRotInfo);
+ mdp_wrapper::dump("mRotData", mRotData);
+ ALOGE("== Dump MdssRot end ==");
+}
+
+} // namespace overlay