Merge "Remove more dead code."
diff --git a/libcutils/Android.bp b/libcutils/Android.bp
index 319a73a..5144fc6 100644
--- a/libcutils/Android.bp
+++ b/libcutils/Android.bp
@@ -68,7 +68,6 @@
"record_stream.cpp",
"sockets.cpp",
"strdup16to8.cpp",
- "strdup8to16.cpp",
"strlcpy.c",
"threads.cpp",
],
diff --git a/libcutils/include/cutils/jstring.h b/libcutils/include/cutils/jstring.h
index a342608..6ede786 100644
--- a/libcutils/include/cutils/jstring.h
+++ b/libcutils/include/cutils/jstring.h
@@ -14,8 +14,7 @@
* limitations under the License.
*/
-#ifndef __CUTILS_STRING16_H
-#define __CUTILS_STRING16_H
+#pragma once
#include <stdint.h>
#include <stddef.h>
@@ -33,14 +32,6 @@
extern size_t strnlen16to8 (const char16_t* s, size_t n);
extern char * strncpy16to8 (char *dest, const char16_t*s, size_t n);
-extern char16_t * strdup8to16 (const char* s, size_t *out_len);
-extern size_t strlen8to16 (const char* utf8Str);
-extern char16_t * strcpy8to16 (char16_t *dest, const char*s, size_t *out_len);
-extern char16_t * strcpylen8to16 (char16_t *dest, const char*s, int length,
- size_t *out_len);
-
#ifdef __cplusplus
}
#endif
-
-#endif /* __CUTILS_STRING16_H */
diff --git a/libcutils/strdup8to16.cpp b/libcutils/strdup8to16.cpp
deleted file mode 100644
index d1e51b9..0000000
--- a/libcutils/strdup8to16.cpp
+++ /dev/null
@@ -1,215 +0,0 @@
-/* libs/cutils/strdup8to16.c
-**
-** Copyright 2006, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-** http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
-
-#include <cutils/jstring.h>
-
-#include <assert.h>
-#include <limits.h>
-#include <stdlib.h>
-
-/* See http://www.unicode.org/reports/tr22/ for discussion
- * on invalid sequences
- */
-
-#define UTF16_REPLACEMENT_CHAR 0xfffd
-
-/* Clever trick from Dianne that returns 1-4 depending on leading bit sequence*/
-#define UTF8_SEQ_LENGTH(ch) (((0xe5000000 >> (((ch) >> 3) & 0x1e)) & 3) + 1)
-
-/* note: macro expands to multiple lines */
-#define UTF8_SHIFT_AND_MASK(unicode, byte) \
- (unicode)<<=6; (unicode) |= (0x3f & (byte));
-
-#define UNICODE_UPPER_LIMIT 0x10fffd
-
-/**
- * out_len is an out parameter (which may not be null) containing the
- * length of the UTF-16 string (which may contain embedded \0's)
- */
-
-extern char16_t * strdup8to16 (const char* s, size_t *out_len)
-{
- char16_t *ret;
- size_t len;
-
- if (s == NULL) return NULL;
-
- len = strlen8to16(s);
-
- // fail on overflow
- if (len && SIZE_MAX/len < sizeof(char16_t))
- return NULL;
-
- // no plus-one here. UTF-16 strings are not null terminated
- ret = (char16_t *) malloc (sizeof(char16_t) * len);
-
- return strcpy8to16 (ret, s, out_len);
-}
-
-/**
- * Like "strlen", but for strings encoded with Java's modified UTF-8.
- *
- * The value returned is the number of UTF-16 characters required
- * to represent this string.
- */
-extern size_t strlen8to16 (const char* utf8Str)
-{
- size_t len = 0;
- int ic;
- int expected = 0;
-
- while ((ic = *utf8Str++) != '\0') {
- /* bytes that start 0? or 11 are lead bytes and count as characters.*/
- /* bytes that start 10 are extention bytes and are not counted */
-
- if ((ic & 0xc0) == 0x80) {
- /* count the 0x80 extention bytes. if we have more than
- * expected, then start counting them because strcpy8to16
- * will insert UTF16_REPLACEMENT_CHAR's
- */
- expected--;
- if (expected < 0) {
- len++;
- }
- } else {
- len++;
- expected = UTF8_SEQ_LENGTH(ic) - 1;
-
- /* this will result in a surrogate pair */
- if (expected == 3) {
- len++;
- }
- }
- }
-
- return len;
-}
-
-
-
-/*
- * Retrieve the next UTF-32 character from a UTF-8 string.
- *
- * Stops at inner \0's
- *
- * Returns UTF16_REPLACEMENT_CHAR if an invalid sequence is encountered
- *
- * Advances "*pUtf8Ptr" to the start of the next character.
- */
-static inline uint32_t getUtf32FromUtf8(const char** pUtf8Ptr)
-{
- uint32_t ret;
- int seq_len;
- int i;
-
- /* Mask for leader byte for lengths 1, 2, 3, and 4 respectively*/
- static const unsigned char leaderMask[4] = {0xff, 0x1f, 0x0f, 0x07};
-
- /* Bytes that start with bits "10" are not leading characters. */
- if (((**pUtf8Ptr) & 0xc0) == 0x80) {
- (*pUtf8Ptr)++;
- return UTF16_REPLACEMENT_CHAR;
- }
-
- /* note we tolerate invalid leader 11111xxx here */
- seq_len = UTF8_SEQ_LENGTH(**pUtf8Ptr);
-
- ret = (**pUtf8Ptr) & leaderMask [seq_len - 1];
-
- if (**pUtf8Ptr == '\0') return ret;
-
- (*pUtf8Ptr)++;
- for (i = 1; i < seq_len ; i++, (*pUtf8Ptr)++) {
- if ((**pUtf8Ptr) == '\0') return UTF16_REPLACEMENT_CHAR;
- if (((**pUtf8Ptr) & 0xc0) != 0x80) return UTF16_REPLACEMENT_CHAR;
-
- UTF8_SHIFT_AND_MASK(ret, **pUtf8Ptr);
- }
-
- return ret;
-}
-
-
-/**
- * out_len is an out parameter (which may not be null) containing the
- * length of the UTF-16 string (which may contain embedded \0's)
- */
-
-extern char16_t * strcpy8to16 (char16_t *utf16Str, const char*utf8Str,
- size_t *out_len)
-{
- char16_t *dest = utf16Str;
-
- while (*utf8Str != '\0') {
- uint32_t ret;
-
- ret = getUtf32FromUtf8(&utf8Str);
-
- if (ret <= 0xffff) {
- *dest++ = (char16_t) ret;
- } else if (ret <= UNICODE_UPPER_LIMIT) {
- /* Create surrogate pairs */
- /* See http://en.wikipedia.org/wiki/UTF-16/UCS-2#Method_for_code_points_in_Plane_1.2C_Plane_2 */
-
- *dest++ = 0xd800 | ((ret - 0x10000) >> 10);
- *dest++ = 0xdc00 | ((ret - 0x10000) & 0x3ff);
- } else {
- *dest++ = UTF16_REPLACEMENT_CHAR;
- }
- }
-
- *out_len = dest - utf16Str;
-
- return utf16Str;
-}
-
-/**
- * length is the number of characters in the UTF-8 string.
- * out_len is an out parameter (which may not be null) containing the
- * length of the UTF-16 string (which may contain embedded \0's)
- */
-
-extern char16_t * strcpylen8to16 (char16_t *utf16Str, const char*utf8Str,
- int length, size_t *out_len)
-{
- /* TODO: Share more of this code with the method above. Only 2 lines changed. */
-
- char16_t *dest = utf16Str;
-
- const char *end = utf8Str + length; /* This line */
- while (utf8Str < end) { /* and this line changed. */
- uint32_t ret;
-
- ret = getUtf32FromUtf8(&utf8Str);
-
- if (ret <= 0xffff) {
- *dest++ = (char16_t) ret;
- } else if (ret <= UNICODE_UPPER_LIMIT) {
- /* Create surrogate pairs */
- /* See http://en.wikipedia.org/wiki/UTF-16/UCS-2#Method_for_code_points_in_Plane_1.2C_Plane_2 */
-
- *dest++ = 0xd800 | ((ret - 0x10000) >> 10);
- *dest++ = 0xdc00 | ((ret - 0x10000) & 0x3ff);
- } else {
- *dest++ = UTF16_REPLACEMENT_CHAR;
- }
- }
-
- *out_len = dest - utf16Str;
-
- return utf16Str;
-}