Remove libstats/Android.bp
am: a33f81bff5
Change-Id: I4b0886f59dfe6c773662c1dafe4190a8785e21a7
diff --git a/adb/daemon/shell_service.cpp b/adb/daemon/shell_service.cpp
index 0fb14c4..f62032d 100644
--- a/adb/daemon/shell_service.cpp
+++ b/adb/daemon/shell_service.cpp
@@ -85,7 +85,6 @@
#include <paths.h>
#include <pty.h>
#include <pwd.h>
-#include <sys/select.h>
#include <termios.h>
#include <memory>
@@ -141,6 +140,20 @@
return true;
}
+struct SubprocessPollfds {
+ adb_pollfd pfds[3];
+
+ adb_pollfd* data() { return pfds; }
+ size_t size() { return 3; }
+
+ adb_pollfd* begin() { return pfds; }
+ adb_pollfd* end() { return pfds + size(); }
+
+ adb_pollfd& stdinout_pfd() { return pfds[0]; }
+ adb_pollfd& stderr_pfd() { return pfds[1]; }
+ adb_pollfd& protocol_pfd() { return pfds[2]; }
+};
+
class Subprocess {
public:
Subprocess(std::string command, const char* terminal_type, SubprocessType type,
@@ -176,8 +189,7 @@
void PassDataStreams();
void WaitForExit();
- unique_fd* SelectLoop(fd_set* master_read_set_ptr,
- fd_set* master_write_set_ptr);
+ unique_fd* PollLoop(SubprocessPollfds* pfds);
// Input/output stream handlers. Success returns nullptr, failure returns
// a pointer to the failed FD.
@@ -545,23 +557,23 @@
}
// Start by trying to read from the protocol FD, stdout, and stderr.
- fd_set master_read_set, master_write_set;
- FD_ZERO(&master_read_set);
- FD_ZERO(&master_write_set);
- for (unique_fd* sfd : {&protocol_sfd_, &stdinout_sfd_, &stderr_sfd_}) {
- if (*sfd != -1) {
- FD_SET(sfd->get(), &master_read_set);
- }
- }
+ SubprocessPollfds pfds;
+ pfds.stdinout_pfd() = {.fd = stdinout_sfd_.get(), .events = POLLIN};
+ pfds.stderr_pfd() = {.fd = stderr_sfd_.get(), .events = POLLIN};
+ pfds.protocol_pfd() = {.fd = protocol_sfd_.get(), .events = POLLIN};
// Pass data until the protocol FD or both the subprocess pipes die, at
// which point we can't pass any more data.
while (protocol_sfd_ != -1 && (stdinout_sfd_ != -1 || stderr_sfd_ != -1)) {
- unique_fd* dead_sfd = SelectLoop(&master_read_set, &master_write_set);
+ unique_fd* dead_sfd = PollLoop(&pfds);
if (dead_sfd) {
D("closing FD %d", dead_sfd->get());
- FD_CLR(dead_sfd->get(), &master_read_set);
- FD_CLR(dead_sfd->get(), &master_write_set);
+ auto it = std::find_if(pfds.begin(), pfds.end(), [=](const adb_pollfd& pfd) {
+ return pfd.fd == dead_sfd->get();
+ });
+ CHECK(it != pfds.end());
+ it->fd = -1;
+ it->events = 0;
if (dead_sfd == &protocol_sfd_) {
// Using SIGHUP is a decent general way to indicate that the
// controlling process is going away. If specific signals are
@@ -583,30 +595,19 @@
}
}
-namespace {
-
-inline bool ValidAndInSet(const unique_fd& sfd, fd_set* set) {
- return sfd != -1 && FD_ISSET(sfd.get(), set);
-}
-
-} // namespace
-
-unique_fd* Subprocess::SelectLoop(fd_set* master_read_set_ptr,
- fd_set* master_write_set_ptr) {
- fd_set read_set, write_set;
- int select_n =
- std::max(std::max(protocol_sfd_.get(), stdinout_sfd_.get()), stderr_sfd_.get()) + 1;
+unique_fd* Subprocess::PollLoop(SubprocessPollfds* pfds) {
unique_fd* dead_sfd = nullptr;
+ adb_pollfd& stdinout_pfd = pfds->stdinout_pfd();
+ adb_pollfd& stderr_pfd = pfds->stderr_pfd();
+ adb_pollfd& protocol_pfd = pfds->protocol_pfd();
- // Keep calling select() and passing data until an FD closes/errors.
+ // Keep calling poll() and passing data until an FD closes/errors.
while (!dead_sfd) {
- memcpy(&read_set, master_read_set_ptr, sizeof(read_set));
- memcpy(&write_set, master_write_set_ptr, sizeof(write_set));
- if (select(select_n, &read_set, &write_set, nullptr, nullptr) < 0) {
+ if (adb_poll(pfds->data(), pfds->size(), -1) < 0) {
if (errno == EINTR) {
continue;
} else {
- PLOG(ERROR) << "select failed, closing subprocess pipes";
+ PLOG(ERROR) << "poll failed, closing subprocess pipes";
stdinout_sfd_.reset(-1);
stderr_sfd_.reset(-1);
return nullptr;
@@ -614,34 +615,47 @@
}
// Read stdout, write to protocol FD.
- if (ValidAndInSet(stdinout_sfd_, &read_set)) {
+ if (stdinout_pfd.fd != -1 && (stdinout_pfd.revents & POLLIN)) {
dead_sfd = PassOutput(&stdinout_sfd_, ShellProtocol::kIdStdout);
}
// Read stderr, write to protocol FD.
- if (!dead_sfd && ValidAndInSet(stderr_sfd_, &read_set)) {
+ if (!dead_sfd && stderr_pfd.fd != 1 && (stderr_pfd.revents & POLLIN)) {
dead_sfd = PassOutput(&stderr_sfd_, ShellProtocol::kIdStderr);
}
// Read protocol FD, write to stdin.
- if (!dead_sfd && ValidAndInSet(protocol_sfd_, &read_set)) {
+ if (!dead_sfd && protocol_pfd.fd != -1 && (protocol_pfd.revents & POLLIN)) {
dead_sfd = PassInput();
// If we didn't finish writing, block on stdin write.
if (input_bytes_left_) {
- FD_CLR(protocol_sfd_.get(), master_read_set_ptr);
- FD_SET(stdinout_sfd_.get(), master_write_set_ptr);
+ protocol_pfd.events &= ~POLLIN;
+ stdinout_pfd.events |= POLLOUT;
}
}
// Continue writing to stdin; only happens if a previous write blocked.
- if (!dead_sfd && ValidAndInSet(stdinout_sfd_, &write_set)) {
+ if (!dead_sfd && stdinout_pfd.fd != -1 && (stdinout_pfd.revents & POLLOUT)) {
dead_sfd = PassInput();
// If we finished writing, go back to blocking on protocol read.
if (!input_bytes_left_) {
- FD_SET(protocol_sfd_.get(), master_read_set_ptr);
- FD_CLR(stdinout_sfd_.get(), master_write_set_ptr);
+ protocol_pfd.events |= POLLIN;
+ stdinout_pfd.events &= ~POLLOUT;
}
}
+
+ // After handling all of the events we've received, check to see if any fds have died.
+ if (stdinout_pfd.revents & (POLLHUP | POLLRDHUP | POLLERR | POLLNVAL)) {
+ return &stdinout_sfd_;
+ }
+
+ if (stderr_pfd.revents & (POLLHUP | POLLRDHUP | POLLERR | POLLNVAL)) {
+ return &stderr_sfd_;
+ }
+
+ if (protocol_pfd.revents & (POLLHUP | POLLRDHUP | POLLERR | POLLNVAL)) {
+ return &protocol_sfd_;
+ }
} // while (!dead_sfd)
return dead_sfd;
diff --git a/adb/test_device.py b/adb/test_device.py
index 57925e8..083adce 100755
--- a/adb/test_device.py
+++ b/adb/test_device.py
@@ -536,6 +536,36 @@
for i, success in result.iteritems():
self.assertTrue(success)
+ def disabled_test_parallel(self):
+ """Spawn a bunch of `adb shell` instances in parallel.
+
+ This was broken historically due to the use of select, which only works
+ for fds that are numerically less than 1024.
+
+ Bug: http://b/141955761"""
+
+ n_procs = 2048
+ procs = dict()
+ for i in xrange(0, n_procs):
+ procs[i] = subprocess.Popen(
+ ['adb', 'shell', 'read foo; echo $foo; read rc; exit $rc'],
+ stdin=subprocess.PIPE,
+ stdout=subprocess.PIPE
+ )
+
+ for i in xrange(0, n_procs):
+ procs[i].stdin.write("%d\n" % i)
+
+ for i in xrange(0, n_procs):
+ response = procs[i].stdout.readline()
+ assert(response == "%d\n" % i)
+
+ for i in xrange(0, n_procs):
+ procs[i].stdin.write("%d\n" % (i % 256))
+
+ for i in xrange(0, n_procs):
+ assert(procs[i].wait() == i % 256)
+
class ArgumentEscapingTest(DeviceTest):
def test_shell_escaping(self):
diff --git a/libvndksupport/linker.cpp b/libvndksupport/linker.cpp
index cf0f618..30b9c2e 100644
--- a/libvndksupport/linker.cpp
+++ b/libvndksupport/linker.cpp
@@ -26,9 +26,7 @@
#include <initializer_list>
-__attribute__((weak)) extern "C" android_namespace_t* android_get_exported_namespace(const char*);
-__attribute__((weak)) extern "C" void* android_dlopen_ext(const char*, int,
- const android_dlextinfo*);
+extern "C" android_namespace_t* android_get_exported_namespace(const char*);
namespace {
@@ -42,10 +40,8 @@
static VendorNamespace get_vendor_namespace() {
static VendorNamespace result = ([] {
for (const char* name : {"sphal", "default"}) {
- if (android_get_exported_namespace != nullptr) {
- if (android_namespace_t* ns = android_get_exported_namespace(name)) {
- return VendorNamespace{ns, name};
- }
+ if (android_namespace_t* ns = android_get_exported_namespace(name)) {
+ return VendorNamespace{ns, name};
}
}
return VendorNamespace{};
@@ -59,10 +55,6 @@
if (getpid() == 1) {
return 0;
}
- if (android_get_exported_namespace == nullptr) {
- ALOGD("android_get_exported_namespace() not available. Assuming system process.");
- return 0;
- }
// In vendor process, 'vndk' namespace is not visible, whereas in system
// process, it is.
@@ -76,10 +68,7 @@
.flags = ANDROID_DLEXT_USE_NAMESPACE,
.library_namespace = vendor_namespace.ptr,
};
- void* handle = nullptr;
- if (android_dlopen_ext != nullptr) {
- handle = android_dlopen_ext(name, flag, &dlextinfo);
- }
+ void* handle = android_dlopen_ext(name, flag, &dlextinfo);
if (!handle) {
ALOGE("Could not load %s from %s namespace: %s.", name, vendor_namespace.name,
dlerror());
diff --git a/rootdir/init.rc b/rootdir/init.rc
index b89c45e..803d44a 100644
--- a/rootdir/init.rc
+++ b/rootdir/init.rc
@@ -688,6 +688,9 @@
mkdir /data/rollback 0700 system system encryption=DeleteIfNecessary
mkdir /data/rollback-observer 0700 system system encryption=DeleteIfNecessary
+ # Create root dir for Incremental Service
+ mkdir /data/incremental 0770 system system encryption=None
+
# Wait for apexd to finish activating APEXes before starting more processes.
wait_for_prop apexd.status ready
perform_apex_config