| 2006-11-11 Theodore Tso <tytso@mit.edu> |
| |
| * set_fields.c: Add the ability to use set_super_value to set the |
| superblock flags field. |
| |
| * htree.c (htree_dump_leaf_node): Check the superblock flags to |
| determine whether to use the signed or unsigned version of |
| the hash should be used. |
| |
| 2006-10-01 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in (DEPLIBBLKID): Use DEPLIBBLKID not LIBBLKID to |
| define the dependencies used by the blkid library. |
| |
| 2006-08-30 Eric Sandeen <esandeen@redhat.com> |
| |
| * htree.c (htree_dump_int_node): Fix printf formats. |
| |
| 2006-08-29 Theodore Tso <tytso@mit.edu> |
| |
| * lsdel.c (do_lsdel): Fix core-dumping bug. Don't depend on |
| current_fs being non-NULL until after the call to |
| common_args_process(). (Addresses Debian Bug: #378335) |
| |
| 2006-05-29 Theodore Tso <tytso@mit.edu> |
| |
| * util.c (reset_getopt): In order to support ancient Linux header |
| files that don't define __GLIBC__ (but which were using |
| glibc anyway), assume that any system that defines |
| __linux__ should use the glibc method of resetting getopt(). |
| |
| 2006-05-28 Theodore Tso <tytso@mit.edu> |
| |
| * unused.c (do_dump_unused): Use EXT2_MAX_BLOCK_SIZE instead of a |
| hardcoded blocksize of 32768, since this will fail on a |
| filesystem with a 64k blocksize. (Addresses SourceForge |
| bug #1424311) |
| |
| 2006-05-21 Theodore Tso <tytso@mit.edu> |
| |
| * set_fields.c (parse_time): Fix type warning problem with time_t |
| |
| 2006-05-08 Theodore Tso <tytso@mit.edu> |
| |
| * debugfs.c (do_show_super_stats): Print out the block group flags |
| if they are set. |
| |
| 2006-04-27 Theodore Ts'o <tytso@mit.edu> |
| |
| * htree.c (do_htree_dump, do_dx_hash), ls.c (do_list_dir): Add |
| missing default case in the getopt() while/switch loop so |
| that we print a usage() statement when the user specified |
| an illegal option. |
| |
| 2006-03-18 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c, htree.c, unused.c: Change printf statements to use |
| %u instead of %d when printing block numbers. |
| |
| * debugfs.c (do_open_filesys), debugfs.8.in: Add the -e option to |
| the open_filesystem command, which requests that the |
| filesystem be opened in exclusive mode. |
| |
| 2006-03-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * Fix bug in icheck which incorrectly reports the last valid inode |
| number as the owner for an EA block. |
| |
| 2005-12-10 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c, debugfs.h, logdump.c, ls.c: Clean up various gcc |
| -Wall complaints. |
| |
| 2005-09-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * set_fields.c (parse_time), util.c (string_to_time), debugfs.c |
| (do_set_current_time): Generalize the time parsing code |
| and move it to util.c:string_to_time(). Add new command, |
| set_current_time, which sets the time used to set the |
| filesystems's time fields. |
| |
| 2005-09-06 Theodore Ts'o <tytso@mit.edu> |
| |
| * set_fields.c: Fix set_inode_field so it can properly set the |
| i_size field. Thanks to James Nelson for pointing this |
| out. |
| |
| 2005-07-04 Theodore Ts'o <tytso@mit.edu> |
| |
| * set_fields.c: Fix a bug which caused set_inode_field to silently |
| fail when setting the following fields: frag, fsize, |
| uid_high, gid_high, and author. |
| |
| 2006-06-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.38 |
| |
| 2005-05-05 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_stat): Check to make sure a filesystem is open |
| and abort if with an error if not, to prevent a seg fault |
| in that case. |
| |
| 2005-03-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.37 |
| |
| 2005-03-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (internal_dump_inode_extra): Print the size of |
| the inode's extra fields. |
| |
| 2005-03-20 Theodore Ts'o <tytso@mit.edu> |
| |
| * util.c (debugfs_write_new_inode): New function |
| |
| * debgufs.c (do_write, do_mknod): Call ext2fs_write_new_inode() |
| instead of ext2fs_write_inode(). |
| |
| * debugfs.c (do_stat): Add support for dumping extended attributes |
| which are stored in the inode body. |
| |
| * util.c (debugfs_read_inode_full): new function |
| |
| 2006-02-05 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.36 |
| |
| 2005-02-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * set_fields.c: Define _XOPEN_SOURCE to be 500 to fix compilation |
| problems on Solaris. |
| |
| 2005-01-20 Theodore Ts'o <tytso@mit.edu> |
| |
| * set_fields.c: Add support for the jnl_blocks[] for set_super_value |
| |
| 2005-01-19 Matthias Andree <matthias.andree@gmx.de> |
| |
| * set_fields.c: Add _XOPEN_SOURCE #define on all but Solaris |
| systems so that strptime() gets defined. |
| (parse_bmap): Add missing return statement. |
| |
| 2005-01-07 Theodore Ts'o <tytso@mit.edu> |
| |
| * debug_cmds.ct: Make the official name of set_inode be |
| set_inode_field, since it is more intuitive. |
| |
| * set_fields.c (print_possible_fields): Document bmap[] in |
| "set_inode_field -l" listing. Change name of set_inode to |
| set_inode_field in usage message. |
| |
| 2004-12-23 Theodore Ts'o <tytso@mit.edu> |
| |
| * set_fields.c: Add support for array indexes, which we use for |
| the i_block[] array. Also add the pseudo inode field |
| bmap, which can be used for setting logical->physical |
| mappings directly. |
| |
| 2004-12-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * setfields.c: Renamed from setsuper.c |
| Added support to set date/time fields. |
| Added support for setting superblock values wtime, mtime, |
| lastcheck, and mkfs_time as date/time fields. |
| Added support for the set_inode command. |
| * debugfs.h, debug_cmds.ct, debugfs.8.in: Added set_inode command |
| |
| 2004-12-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * setsuper.c: Add definitions for newer superblock fields: |
| reserved_gdt_blocks, jnl_backup_type, default_mount_opts, |
| first_meta_bg, and mkfs_time. |
| |
| 2004-12-14 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in: Move strip command to install-strip target. |
| Use Linux-kernel-style makefile output for "make install" |
| |
| * Makefile.in (installdirs): Use $(MKINSTALLDIRS) macro |
| |
| 2004-11-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * util.c (time_to_string): If the TZ environment variable is set |
| to GMT, use gmtime() instead of localtime() or ctime() to |
| force the use of GMT. This is because the dietlibc |
| doesn't honor the TZ environment variable. |
| |
| * Makefile.in: Use Linux-kernel-style makefile output to make it |
| easier to see errors/warnings. |
| |
| 2004-11-29 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_open_filesys): Fix obvious uninitialized variable |
| buglet. |
| |
| 2004-11-19 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (kill_file_by_inode): Only iterate over the inode to |
| release blocks if the inode has them; otherwise attempting |
| to rm devices and fast symlinks will lead to errors. |
| (Addresses Sourceforge Bug #954741 and #957244) |
| |
| 2004-07-28 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c, debugfs.8.in: Add new option -d which allows the |
| system administrator to specify data source of a |
| filesystem being opened via an e2image file. |
| |
| 2004-04-11 Theodore Ts'o <tytso@mit.edu> |
| |
| * util.c (open_pager): Use DEBUGFS_PAGER in preference to PAGER |
| (Addresses Debian Bug #239547) |
| |
| 2004-04-03 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in: Update the modtime even if subst doesn't need to |
| update the debugfs man page, to avoid always re-running |
| subst, especially since there are no dependencies on the |
| man page. |
| |
| 2004-03-20 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (make_link): Set the filetype information when |
| creating a link. |
| |
| 2004-02-28 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.35 |
| |
| 2004-02-23 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (internal_dump_inode): Display the major/minor device |
| numbers for block/character devices. |
| (do_mknod): Add support for new-style device numbers (where |
| the major or minor number is greater than 255 and less |
| than 65535). (Addresses Sourceforge bug #865289) |
| |
| 2004-02-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.8.in: Fix the debugfs man page to reference the |
| init_filesys command, instead of "initialize". (Addresses |
| Debian Bug #232406) |
| |
| 2004-02-14 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (internal_dump_inode): Correctly deal with symlinks |
| that have extended attribute information. (Addresses |
| Debian Bug #232328) |
| |
| 2004-01-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.8.in: Document the PAGER and DEBUGFS_PAGER environment |
| variables. |
| |
| * util.c (open_pager): Use the "more" pager in preference to |
| "less", since "less" doesn't work terribly well for |
| debugfs's purpose. |
| |
| 2003-12-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * util.c (open_pager): Try to use the DEBUGFS_PAGER environment |
| variable first, and then fall back to the PAGER |
| environment variable. Finally, search for an appropriate |
| pager executable. |
| |
| 2003-12-11 Theodore Ts'o <tytso@thunk.org> |
| |
| * debugfs.c (do_write, do_mkdir): If the directory is full, |
| automatically call ext2fs_expand_dir() and then retry to |
| add the link to the directory as a convenience to the |
| user. (Addresses Debian Bug: #217892) |
| (do_mknod): Clean up expand_dir error handling. |
| |
| 2003-12-07 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_write): Mask off the file type bits, and OR in the |
| regular file information. (Addresses Debian Bug: #217456) |
| |
| * util.c (open_pager): Search for the pager to use, starting with |
| 'pager', and then falling back to 'less' and then 'more'. |
| (Addresses Debian Bug: #221977) |
| |
| * debugfs.c, debugfs.h, dump.c, htree.c, icheck.c, logdump.c, |
| ls.c, lsdel.c, ncheck.c, setsuper.c, unused.c: Fix gcc |
| -Wall nitpicks. |
| |
| 2003-08-24 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.8.in: Adjust description line so that apropos |
| "ext2" or "ext3" will find the man page. (Addresses |
| Debian Bug #206845) |
| |
| 2003-08-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.8.in: Fully document the logdump command in the debugfs |
| man page. |
| |
| * logdump.c (do_logdump): Add -s option which will use the journal |
| inode information in the superblock. |
| |
| 2003-07-25 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.34 |
| |
| 2003-07-06 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_imap): Fix gcc -Wall nitpicks (printf format types). |
| |
| 2003-05-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * unused.c (do_dump_unused): Add new command which dumps the |
| unused blocks. (Initial implementation; currently only |
| dumps the output to stdout.) |
| |
| 2003-05-13 root <tytso@mit.edu> |
| |
| * util.c (reset_getopt), debugfs.c (do_open_filesys, |
| do_show_super_stats), ls.c (do_list_dir), dump.c (do_dump), |
| htree.c (do_htree_dump, do_dx_hash), logdump.c (do_logdump): |
| Define and use a new function, reset_getopt(), which does whatever |
| is necessary to reset getopt() again. This is different for |
| different implementations, so the portabilty issues are a bit of a |
| nightmare. (Addresses Debian bug #192834) |
| |
| 2003-05-05 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_imap), debugfs.h, debug_cmds.ct, debugfs.8.in: |
| Added new command, imap, which prints the location of a |
| specified inode in the inode table. |
| |
| 2003-04-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.33 |
| |
| 2003-03-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in (DLOPEN_LIB): Link in the libdl library if it is |
| present on the system. |
| |
| * debugfs.c (main): Call ss_get_readline() to attempt to pull in |
| the readline library. |
| |
| 2003-03-06 Theodore Tso <tytso@mit.edu> |
| |
| * debugfs.c (do_open_filesys, do_show_super_stats), |
| ls.c (do_list_dir), dump.c (do_dump), htree.c (do_htree_dump, |
| do_dx_hash), logdump.c (do_logdump): Reset optind to 1 for better |
| compatibility with non-glibc implementations of getopt. |
| |
| 2003-03-01 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in, logdump.c (do_logdump): Use the blkid functions to |
| find the external journal device. |
| |
| 2003-01-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * dump.c (do_dump): Open the output file with O_LARGEFILE so we |
| can write files larger than 2GB. |
| |
| 2002-11-09 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.32 |
| |
| 2002-11-08 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.31 |
| |
| 2002-10-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.30 |
| |
| 2002-10-31 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_write): Check to see if the filename exists before |
| creating it, and give an error if so. Addresses |
| Sourceforge bug #478195. |
| |
| 2002-10-30 Theodore Ts'o <tytso@mit.edu> |
| |
| * Makefile.in (install): Search all compression extensions when |
| deleting old man pages. |
| |
| 2002-10-13 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.h, htree.c, setsuper.c: Fix gcc -Wall nits. |
| |
| 2002-10-02 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * htree.c (htree_dump_leaf_node): Use ext2fs_read_dir_block2 so |
| that the directory entries are appropriately byte-swapped. |
| |
| 2001-09-24 Theodore Tso <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.29 |
| |
| 2002-09-22 root <tytso@mit.edu> |
| |
| * htree.c (htree_dump_int_node): Flag continuation hashes to make |
| them easier to find. |
| |
| 2001-08-31 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.28 |
| |
| 2002-08-23 Theodore Ts'o <tytso@mit.edu> |
| |
| * setsuper.c: Add support for the fields s_uuid, s_journal_uuid, |
| s_hash_seed, s_def_hash_version. Add routines for parsing |
| UUID's and hash algorithm identifiers. |
| |
| 2002-08-16 Theodore Ts'o <tytso@mit.edu> |
| |
| * icheck.c (do_icheck): Check to see if the block is listed as |
| part of the extended attribute block. |
| |
| 2002-07-21 Theodore Ts'o <tytso@mit.edu> |
| |
| * htree.c (do_htree_dump): Fix a bug where we were not cleanly |
| closing the pager after errors, which would leave the |
| tty in noecho mode. |
| |
| 2002-07-18 Theodore Ts'o <tytso@mit.edu> |
| |
| * htree.c (htree_dump_int_node): Add byte swapping code sot that |
| the htree dump function works on a big-endian machine. |
| |
| 2002-07-15 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_show_super_stats): Calculate and print the number |
| of directories on a filesystem --- because we can and |
| because it can be useful. |
| |
| 2002-07-09 Theodore Ts'o <tytso@mit.edu> |
| |
| * debugfs.c (do_rmdir), debugfs.8.in: Implement the rmdir command. |
| Addresses Debian bug #138003. |
| |
| 2002-06-26 Theodore Ts'o <tytso@mit.edu> |
| |
| * htree.c (do_dx_hash): Use new ext2fs_dirhash function signature. |
| Add getopt support so user can specify the hash version. |
| |
| 2002-05-11 <tytso@snap.thunk.org> |
| |
| * debug_cmds.ct, debugfs.c (do_bmap): Add new command "bmap" which |
| calculates the logical->physical block mapping for an |
| inode. |
| |
| * debugfs.c (do_init_filsys, main), util.c |
| (common_block_args_process): Fix bad calling parameter |
| order when calling parse_ulong. This broke the -b and -s |
| options to debugfs, as well as do_init, and the testb, |
| setb, clearb functions. |
| |
| 2002-04-01 <tytso@snap.thunk.org> |
| |
| * util.c (parse_ulong): Fix typo which cases parse_ulong to |
| coredump if the err variable is filled in (for example, if |
| the -b or -s options are passed to the debugfs's |
| command-line invocation). |
| |
| 2002-03-11 Theodore Tso <tytso@mit.edu> |
| |
| * ls.c (list_dir_proc): Fix bug: ls -l fails to print the file |
| type correctly if running on big-endian systems. |
| |
| * htree.c (htree_dump_leaf_node): Use the ext2_dirhash function |
| instead of a local static function. |
| |
| 2002-03-08 Theodore Tso <tytso@mit.edu> |
| |
| * Release of E2fsprogs 1.27 |
| |
| 2002-03-07 <tytso@snap.thunk.org> |
| |
| * ls.c (list_dir_proc): Fix typo in debugfs which was causing a |
| compiler warning. |
| |
| 2002-03-05 Theodore Tso <tytso@mit.edu> |
| |
| * lsdel.c (do_lsdel): lsdel uses the pager to print out the list |
| of potentially deleted inode. Thanks to Jaroslav Drzik |
| <jdrzik@host.sk> for suggesting this enhancement. |
| |
| * debugfs.c (do_modify_inode): Fix bug which caused modify_inode |
| to core dump if a fliesystem isn't open. Thanks to |
| Jaroslav Drzik <jdrzik@host.sk> for finding and reporting |
| the bug and his proposed fix. |
| |
| 2002-02-26 Theodore Tso <tytso@mit.edu> |
| |
| * ls.c (list_dir_proc): When listing the directory entry in long |
| format, include the file type of the directory entry in |
| parenthesis. |
| |
| 2002-02-25 Theodore Tso <tytso@mit.edu> |
| |
| * util.c (open_pager): If the PAGER environment is set to __none__ |
| then don't use a pager at all, and ship it all to stdout. |
| |
| * Makefile.in, debug_cmds.ct, htree.c: Add new file htree.c, which |
| implements the three new commands, htree_dump, dx_hash, |
| and dirsearch. |
| |
| 2002-02-24 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in (install): Remove any compressed man pages before |
| installing the man pages. |
| |
| 2002-02-03 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.26 |
| |
| 2002-01-03 Theodore Tso <tytso@mit.edu> |
| |
| * lsdel.c (do_lsdel): New optional argument which allows the user |
| to only see the most recently deleted files. |
| |
| * debugfs.c (do_undel, do_testb, do_freeb, do_setb, do_ffb): Add |
| new command, undelete, which automates undeleting a |
| deleted inode and linking it back to a directory. Add a |
| count argument to the testb, freeb, setb, and ffb commands. |
| |
| * ls.c (list_dir_proc, do_list_dir): Add support for -d option |
| which lists deleted directory entries. |
| |
| * debug_cmds.ct: Add new command, undelete. |
| |
| * dump.c, icheck.c, logdump.c, ls.c, lsdel.c, setsuper.c, |
| debugfs.c: Use new utility functions which factor out |
| commonly used code. |
| |
| * util.c (debugfs_read_inode, debugfs_write_inode, |
| common_block_args_process, common_inode_args_process, |
| common_args_process, strtoblk, parse_ulong): New |
| functions which factor out commonly used code into |
| subroutines for ease of maintenance and to make the |
| executable size smaller. |
| |
| 2001-12-23 Theodore Tso <tytso@mit.edu> |
| |
| * Makefile.in, jfs_user.h: Move linux/jbd.h to |
| ext2fs/kernel-jbd.h, to avoid using the system header |
| file version of hbd.h when using diet glibc (since it |
| forcibly adds /usr/include to the beginning of the |
| include search path.) |
| |
| 2001-12-22 Theodore Tso <tytso@mit.edu> |
| |
| * debugfs.c (kill_file_by_inode, release_blocks_proc): Update the |
| group descriptor free block and inode counts when deleting |
| or killing a file. |
| |
| 2001-12-16 Theodore Tso <tytso@mit.edu> |
| |
| * setsuper.c (print_possible_fields), |
| logdump.c (dump_journal): Fix gcc -Wall nits |
| |
| * Makefile.in, jfs_user.h: linux/jfs.h has been renamed to |
| linux/jbd.h |
| |
| 2001-12-02 Theodore Tso <tytso@mit.edu> |
| |
| * util.c (close_pager): Use pclose() instead of fclose() when |
| closing the pager stream. |
| |
| 2001-11-30 Theodore Tso <tytso@mit.edu> |
| |
| * debugfs.c (finish_range, dump_blocks): Fixed bug in Andreas's > |
| 2GB support changes: you need to use %lld when printf'ing |
| an long long variable. |
| |
| 2001-11-24 Theodore Tso <tytso@mit.edu> |
| |
| * debugfs.8.in: Update manual page to document the set_super_value |
| and logdump commands, and move the "specifying files" |
| section closer to the beginning of the man page so people |
| won't miss it. |
| |
| * setsuper.c (print_possible_fields): "set_super_value -l" now |
| prints out the list of valid superblock fields which the |
| ssv command can set. |
| |
| 2001-09-20 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.25 |
| |
| 2001-09-02 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.24a |
| |
| 2001-08-30 Theodore Tso <tytso@thunk.org> |
| |
| * Release of E2fsprogs 1.24 |
| |
| 2001-08-27 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (main): Remove EXT2FS_VERSION from the version |
| display, since it only confuses people. |
| |
| 2001-08-15 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.23 |
| |
| 2001-08-12 Theodore Tso <tytso@valinux.com> |
| |
| * logdump.c (do_logdump, dump_journal): Add support for dumping |
| external journals. |
| |
| 2001-06-23 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.22 |
| |
| 2001-06-15 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.21 |
| |
| 2001-06-13 Theodore Tso <tytso@valinux.com> |
| |
| * setsuper.c: Add s_lastcheck field to the fields which can be |
| modified using set_super_value. (Suggested by Andreas |
| Dilger) |
| |
| 2001-06-03 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (copy_file): Fixed signed vs unsigned bug which causes |
| read errors to not be noticed. |
| |
| 2001-06-01 Theodore Tso <tytso@valinux.com> |
| |
| * Makefile.in: Move include/asm/types.h.in to |
| lib/ext2fs/ext2_types.h.in. |
| |
| * debugfs.c, debugfs.h, logdump.c: Fix various gcc -Wall nitpicks. |
| |
| * logdump.c (read_journal_block): Replace pread with lseek/read |
| combination. |
| |
| 2001-05-25 Theodore Tso <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.20 |
| |
| 2001-05-14 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h |
| |
| 2001-05-12 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (print_features): Use fputs instead of printf to |
| output using the passed-in FILE *. |
| |
| 2001-05-09 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (do_write, do_mknod): Set the file type information |
| when creating the inode. |
| |
| 2001-05-03 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (do_open_filesys, main): Add -i option which will |
| allow debugfs to examine ext2 image files. |
| |
| 2001-03-29 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (dump_blocks, dump_inode, internal_dump_inode): Add |
| internal_dump_inode() interface for the logdump command. |
| |
| * logdump.c: Imported code from Stephen Tweedie to dump the ext3 |
| journal. |
| |
| 2001-03-18 Theodore Tso <tytso@valinux.com> |
| |
| * debugfs.c (do_write, do_mknod): Remove extra (useless) call to |
| ext2fs_write_inode. |
| |
| 2001-01-12 Theodore Ts'o <tytso@valinux.com> |
| |
| * setsuper.c: Cleaned up some random whitespace problems. |
| |
| * debugfs.h, debugfs.c (do_show_super_stats): Use full words |
| instead of pluralism hack to make I18N conversion easier. |
| Clean up gcc -Wall complaints. |
| |
| 2001-01-11 <tytso@snap.thunk.org> |
| |
| * debugfs.c, debugfs.h, dump.c, icheck.c, ls.c, lsdel.c, ncheck.c, |
| setsuper.c, util.c: Change ino_t to ext2_ino_t. Fix a few |
| minor gcc-wall complaints while we're at it. |
| |
| 2001-01-01 <tytso@snap.thunk.org> |
| |
| * debugfs.c Replace use of struct ext2fs_sb with struct |
| ext2_super_block. |
| |
| 2000-12-30 <tytso@snap.thunk.org> |
| |
| * dump.c (fix_perms): Fix bug for systems which don't have fchown; |
| was incorrectly using chmod instead of chown. |
| |
| * setsuper.c (find_field): Strip the s_prefix if given for ssv |
| fields. Remove hard-coded s_ from inode_size |
| field. (Suggested by Andreas Dilger) |
| |
| * debugfs.c (do_modify_inode): Add the ability to set the inode |
| generation number. (Suggested by Andreas Dilger) |
| |
| 2000-08-23 <tytso@valinux.com> |
| |
| * util.c (string_to_inode): Use strtoul instead of atoi, so that |
| hex inode numbers will be accepted. |
| |
| 2000-08-19 <tytso@valinux.com> |
| |
| * util.c (open_pager): Set SIGPIPE to be ignored, so that quitting |
| out of the pager doesn't blow away debugfs. |
| |
| 2000-08-14 <tytso@valinux.com> |
| |
| * debugfs.c (do_show_super_stats): Use list_super2() instead of |
| using explicit printf statements. (We get a more complete |
| printout this way.) |
| |
| * util.c (open_pager): If the PAGER environment variable is not |
| set, default to using "more". |
| |
| * setsuper.c: New function which implements the set_super_value |
| command. Allows the user to set arbitrary superblock |
| fields. |
| |
| * debugfs.c (dump_inode): Cap the length when printing a fast |
| symbolic link to inode.i_size. |
| (list_blocks_proc): Print block ranges (4510-4533) to make |
| the stat output easier to read. |
| |
| 2000-06-27 Andreas Dilger <adilger@turbolabs.com> |
| |
| * debugfs.c (list_blocks_proc): show relative inode block numbers |
| and/or indirect block status |
| |
| 2000-07-13 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.19 |
| |
| 2000-07-05 Theodore Ts'o <tytso@valinux.com> |
| |
| * debugfs.c (dump_inode): Make the generation field be printed as |
| an unsigned integer. |
| |
| 2000-07-04 <tytso@snap.thunk.org> |
| |
| * Makefile.in: Use _SS_DIR_OVERRIDE to make sure we get the |
| mk_cmds support files from the source tree. |
| |
| 2000-06-09 <tytso@snap.thunk.org> |
| |
| * lsdel.c (do_lsdel): Handle bad bad blocks in inode table. |
| |
| 2000-05-27 Theodore Ts'o <tytso@valinux.com> |
| |
| * debugfs.c (do_testb, do_testi): Call check_fs_bitmaps to avoid |
| coredumping if the bitmaps aren't loaded. |
| |
| * util.c (check_fs_bitmaps): New function which checks whether or |
| not the bitmaps are loaded. |
| |
| 2000-05-23 Aaron Crane <aaronc@pobox.com> |
| |
| * debugfs.8.in: Documented new behaviour. |
| |
| * ls.c (ls_l_file): Fix Y2K bug -- was printing 22-May-100 for |
| recent files. Switched to 4-digit years. |
| |
| * dump.c, debug_cmds.ct (do_rdump): Add new debugfs command |
| "rdump", which recursively dumps a directory and its |
| contents. |
| (fix_perms): New function. Break permission-fixing |
| code out of dump_file() so it can be called by rdump |
| code as well. |
| (dump_file): Call fix_perms(). |
| |
| * debugfs.c, debug_cmds.ct (do_lcd): Add new debugfs command |
| "lcd", which changes the cwd on the native filesystem. |
| |
| * debugfs.c (open_filesystem): Extra args for superblock, |
| blocksize, and catastrophic mode. Changed callers. |
| (do_open_filesys, main): Accept new -b, -s, -c options |
| for open_filesystem. |
| |
| 2000-02-02 Theodore Ts'o <tytso@valinux.com> |
| |
| * debugfs.c (dump_inode): Remove #ifdef for i_version |
| vs. i_generation since we know it will always be |
| i_generation now. |
| |
| 2000-01-18 Theodore Ts'o <tytso@valinux.com> |
| |
| * debugfs.c (main): Use return instead of exit at the end of main |
| to avoid some compiler warnings. |
| |
| * Makefile.in: Since LIBUUID can sometimes include |
| "-lsocket" we need a separate DEPLIBUUID that can be used |
| in Makefile's dependency rules. |
| |
| 1999-11-19 <tytso@valinux.com> |
| |
| * Makefile.in (distclean): Remove TAGS and Makefile.in.old from |
| the source directory. |
| |
| 1999-11-10 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.18 |
| |
| 1999-11-08 <tytso@valinux.com> |
| |
| * icheck.c (do_icheck): |
| * ncheck.c (do_ncheck): If ext2fs_open_inode_scan() returns |
| EXT2_ET_BAD_BLOCK_IN_INODE_TABLE loop to skip over the bad |
| blocks in the inode table. |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.17 |
| |
| 1999-10-26 <tytso@valinux.com> |
| |
| * debugfs.h: Add declaration for do_features() |
| |
| * debugfs.c: Add #incldue of e2p.h to fix gcc warnings. |
| |
| 1999-10-25 <tytso@valinux.com> |
| |
| * debugfs.c (do_dirty_filesys): Make the "dirty" command clear the |
| valid bit on the superblock. (And with a -clean option to |
| set the valid bit.) Originally it was used just to set |
| the "needs to be written" bit in the in-core version of |
| the fs structure. |
| |
| 1999-10-22 <tytso@valinux.com> |
| |
| * Release of E2fsprogs 1.16 |
| |
| 1999-09-07 <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c, debug_cmds.ct: Add new debugfs command "feature" |
| which allows the user to set or clear filesystme features. |
| Add the -f (force) option to the open command. Add the |
| -h (superblock header only) option to the stats command. |
| |
| 1999-07-30 <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (dump_inode): Fix debugfs message so it is the same |
| for when compiled under either Linux 2.2 or 2.3. This |
| allows for the f_swapfs regression test suite to work |
| regardless of which OS e2fsprogs was compiled on. |
| |
| 1999-07-18 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.15 |
| |
| 1999-06-23 <tytso@valinux.com> |
| |
| * debugfs.c (dump_inode): Add compatibility for Linux 2.3 kernels |
| that use i_generation instead of i_version. Patch |
| supplied by Jon Bright <sircus@sircus.demon.co.uk>. |
| |
| 1999-02-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * icheck.c (do_icheck): Check to make sure the inode has valid |
| blocks before iterating over that inode's blocks. |
| |
| 1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.14 |
| |
| 1998-12-15 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.13 |
| |
| 1998-12-03 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Updated dependencies. |
| |
| 1998-07-31 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (do_stat, do_clri): Fix bug where debugfs wasn't |
| displaying the error message if ext2fs_read_inode() failed. |
| (do_rm): Fix similar problem for call to ext2fs_namei(). |
| |
| 1998-07-09 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.12 |
| |
| 1998-06-27 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c: Add a -V option which displays the current version. |
| |
| 1998-03-31 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Change to use new installation directory variables |
| convention. Fix installdirs and uninstall rules to reflect |
| the fact that debugfs has been installed in the root |
| filesystem. Fix uninstall rules to take $(DESTDIR) into |
| account. |
| |
| 1998-03-29 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.h: Add declaration for do_dirty_filsys() to prevent |
| -Wall warnings. |
| |
| * debugfs.c (copy_file): |
| * dump.c (dump_file): Fix -Wall warning caused by |
| signed/unsigned mismatch. |
| |
| 1998-03-23 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c, ls.c, lsdel.c: Add support for large files. (The |
| high 32 bits share space with the i_dir_acl field.) |
| |
| Sun Mar 8 22:53:04 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * ls.c (list_dir_proc): Mask off high 8 bits from |
| dirent->name_len. |
| |
| Mon Dec 1 13:21:09 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in: Install debugfs in /sbin, instead of /usr/sbin. |
| |
| Sat Oct 25 18:35:30 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (copy_file), dump.c (dump_file): Change to use the new |
| fileio primitives in libext2. |
| |
| Fri Oct 24 23:47:43 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (main, do_open_filesys): |
| * dump.c (do_dump): Make the variable which getopt returns into be |
| an int, so that it won't lose on platforms where char is |
| unsigned. |
| |
| Tue Oct 14 21:50:24 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (main): When printing a usage message, have main |
| return 1 (instead of not specifying a return value, bad!) |
| |
| Mon Sep 15 22:03:36 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (main): Fix declaration of main so that it returns an int. |
| |
| Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs 1.11 |
| |
| Thu May 8 23:05:40 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.8.in: Fix minor typos and grammer oops found by Bill |
| Hawes (whawes@star.net). |
| |
| Thu Apr 24 12:16:42 1997 Theodre Ts'o <tytso@localhost.mit.edu> |
| |
| * Release of E2fsprogs version 1.10 |
| |
| Thu Apr 17 12:23:38 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.09 |
| |
| Fri Apr 11 18:56:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.08 |
| |
| Thu Apr 10 14:36:05 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * ls.c: New file which implements the ls command. Added the -l |
| option. |
| |
| Wed Mar 12 13:32:05 1997 Theodore Y. Ts'o <tytso@mit.edu> |
| |
| * Release of E2fsprogs version 1.07 |
| |
| Wed Jan 1 23:53:26 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * lsdel.c (do_lsdel): Use time_to_string() instead of ctime(). |
| |
| Tue Oct 8 02:02:03 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.06 |
| |
| Thu Sep 12 15:23:07 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.05 |
| |
| Mon Sep 9 23:05:11 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (unlink_file_by_name): If unlinking a file with a |
| directory path, correctly replace the slash with a NULL. |
| (do_show_debugfs_params): Don't try to print the open mode |
| if there's no filesystem opened (since that will cause a |
| core dump). |
| (main): Fix usage string; the -w and device elements are |
| independently optional. |
| |
| Tu Sep 3 15:09:39 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (main): Added -f option to debugfs, which takes a |
| command file of debugfs commands and executes them. |
| |
| Sat Aug 31 01:18:43 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.8.in: Heavily edited and improved manual page. |
| |
| * dump.c (dump_file): Improve the write function for writing out |
| the file, so that it is limited to the actual size of the |
| file, instead of outputing the nulls following the EOF. |
| Make sure dump_file does the right thing for files with holes. |
| (do_dump): Add support for the -p option to the dump |
| command, which attempts to preserve the owner and |
| permissions field. |
| |
| Fri Aug 30 14:56:59 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (main): Add -R option to debugfs, which allows it to |
| take a single debugfs command on the command line. |
| |
| Fri Aug 9 09:03:31 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (do_open_filesys): Set optind to 0 to reset getopt(), |
| to be complete correct. |
| (do_show_super_stats): Print OS type, volume label, last |
| mounted directory, and UUID. |
| (dump_inode): Print the fragment information in a |
| filesystem independent way. |
| (do_modify_inode): Modify the fragement information in a |
| filesystem independent way. |
| |
| Thu May 16 11:12:30 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.04 |
| |
| Wed May 3 20:41:26 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (dump_inode): Correctly print the translator on the hurd. |
| (do_modify_inode): Modify the translator block on the hurd. |
| |
| Wed Mar 27 00:33:40 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.03 |
| |
| Wed Jan 31 11:06:08 1996 <tytso@rsts-11.mit.edu> |
| |
| * Release of E2fsprogs version 1.02 |
| |
| Fri Dec 1 22:42:31 1995 <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (LIBS): Rearrange the order of the libraries to be |
| linked, so that -lext2fs is before -lcom_err. |
| |
| Thu Oct 26 12:05:06 1995 <tytso@rsts-11.mit.edu> |
| |
| * Makefile.in (install): Strip programs when they are installed. |
| |
| Fri Aug 18 15:09:08 1995 Theodore Y. Ts'o <tytso@dcl> |
| |
| * debugfs.c (do_find_free_block): Fix typo in code which checked |
| to see if the usage message should be printed. |
| |
| Thu Aug 17 22:55:58 1995 <tytso@rsts-11.mit.edu> |
| |
| * debugfs.c (do_open_filesys): Change to always set optreset to 1, |
| to make BSD getopt()'s happy. Also set optind to 1, which |
| should make more getopt()'s happy. |
| |
| Fri Aug 11 08:45:01 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * debugfs.c (do_find_free_block, do_find_free_inode): Fix bug in |
| the usage handling where "ffi ?" or "ffb ?" would |
| dereference a NULL pointer. |
| |
| Fri Aug 11 14:21:07 1995 Remy Card <card@bbj> |
| |
| * debugfs.8: Updated date and version number. |
| |
| Thu Aug 10 14:28:50 1995 Remy Card <card@bbj> |
| |
| * debugfs.8: Fixed a spelling error in Ted's name :-) |
| |
| Mon Jun 12 19:08:25 1995 Theodore Y. Ts'o (tytso@dcl) |
| |
| * debugfs.c, ncheck.c, icheck.c, lsdel.c, dump.c: Include |
| <errno.h> (if it exists) |
| |
| * debugfs.c, dump.c, icheck.c, lsdel.c, ncheck.c: Don't include |
| <getopt.h> if it doesn't exist. |
| |
| Sun Jun 11 15:21:07 1995 Theodore Y. Ts'o <tytso@lurch.mit.edu> |
| |
| * ncheck.c (do_ncheck): Use LINUX_S_ISDIR instead of S_ISDIR |
| |
| * debugfs.c: Implement the mknod and write commands (from Linus). |
| |
| Change names of modify_char, modify_short, and modify_long |
| to be modify_u8, modify_u16, and modify_u32, respectively. |
| |
| Thu Jun 8 12:29:15 1995 Miles Bader <miles@churchy.gnu.ai.mit.edu> |
| |
| * debugfs.c (dump_inode): Only print out inode frag fields if |
| HAVE_EXT2_FRAGS is defined (by configure). Don't print out the |
| reserved field at all for now. |
| |
| * Makefile.in: Rewritten to conform to GNU coding standards and |
| support separate compilation directories. |
| |
| Thu Nov 24 17:46:23 1994 Theodore Y. Ts'o (tytso@rt-11) |
| |
| * dump.c: Added two new commands, "dump" and "cat", which allow |
| the user to dump the contents of an inode to a file or to |
| stdout, respectively. |
| |
| |