| ## Sample initialization file for GNU nano |
| ## Please note that you must have configured nano with --enable-nanorc |
| ## for this file to be read! Also note that characters specially |
| ## interpreted by the shell should not be escaped here. |
| ## |
| ## To make sure a value is not enabled, use "unset <option>" |
| ## |
| ## For the options that take parameters, the default value is given. |
| ## Other options are unset by default. |
| |
| ## Use auto-indentation. |
| # set autoindent |
| |
| ## Backup files to filename~. |
| # set backup |
| |
| ## The directory to put the backup files in. |
| # set backupdir "" |
| |
| ## Constantly display the cursor position in the status bar. |
| # set const |
| |
| ## Use cut to end of line with ^K by default. |
| # set cut |
| |
| ## Set the line length for wrapping text and justifying paragraphs. |
| ## If fill is negative, the line length will be the screen width less |
| ## this number. |
| ## |
| # set fill -8 |
| |
| ## Enable ~/.nano_history for saving and reading search/replace strings. |
| # set historylog |
| |
| ## Enable mouse support so that mouse clicks can be used to set the mark |
| ## and run shortcuts. |
| # set mouse |
| |
| ## Allow multiple file buffers (using ^R will insert into a separate |
| ## buffer). You must have configured with --enable-multibuffer or |
| ## --enable-extra for this to work. |
| ## |
| # set multibuffer |
| |
| ## Don't convert files from DOS/Mac format. |
| # set noconvert |
| |
| ## Don't follow symlinks when writing files. |
| # set nofollow |
| |
| ## Don't display the helpful shortcut lists at the bottom of the screen. |
| # set nohelp |
| |
| ## Don't wrap text at all. |
| # set nowrap |
| |
| ## Set operating directory. nano will not read or write files outside |
| ## this directory and its subdirectories. Also, the current directory |
| ## is changed to here, so files are inserted from this dir. A blank |
| ## string means the operating directory feature is turned off. |
| ## |
| # set operatingdir "" |
| |
| ## Preserve the XON and XOFF keys (^Q and ^S). |
| # set preserve |
| |
| ## The email-quote string, used to justify email-quoted paragraphs. |
| ## This is an extended regular expression if your system supports them, |
| ## otherwise a literal string. Default: |
| # set quotestr "^([ ]*[\|>:}#])+" |
| ## if you have regexps, otherwise: |
| # set quotestr "> " |
| ## You can get old nano quoted-justify behavior via: |
| # set quotestr "(> )+" |
| |
| ## Fix Backspace/Delete confusion problem. |
| # set rebinddelete |
| |
| ## Do extended regular expression searches by default. |
| # set regexp |
| |
| ## Make the Home key smarter. When Home is pressed anywhere but at the |
| ## very beginning of non-whitespace characters on a line, the cursor |
| ## will jump to that beginning (either forwards or backwards). If the |
| ## cursor is already at that position, it will jump to the true |
| ## beginning of the line. |
| # set smarthome |
| |
| ## Use smooth scrolling as the default. |
| # set smooth |
| |
| ## Use this spelling checker instead of the internal one. This option |
| ## does not properly have a default value. |
| ## |
| # set speller "aspell -c" |
| |
| ## Allow nano to be suspended with ^Z. |
| # set suspend |
| |
| ## Use this tab size instead of the default; it must be greater than 0. |
| # set tabsize 8 |
| |
| ## Save automatically on exit, don't prompt. |
| # set tempfile |
| |
| ## Disallow file modification, why would you want this in an rc file? ;) |
| # set view |
| |
| ## Color setup |
| ## Format: |
| ## syntax "short description" ["filename regex" ...] |
| ## color foreground,background "regex" ["regex"...] |
| ## |
| ## Legal colors: white, black, red, blue, green, yellow, magenta, cyan. |
| ## You may use the prefix "bright" to mean a stronger color highlight. |
| ## |
| ## To use multi-line regexes use the start="regex" end="regex" format. |
| ## |
| ## If your system supports transparency, not specifying a background |
| ## color will use a transparent color. If you don't want this, be sure |
| ## to set the background color to black or white. |
| ## |
| # syntax "c-file" "\.(c|h)$" |
| # color red "\<[A-Z_]{2,}\>" |
| # color green "\<(float|char|int|void|static|const|struct)\>" |
| # color brightyellow "\<(if|while|do|else|case|switch)\>" |
| # color brightcyan "^ *# *(define|include|ifn?def|endif|elif|else|if)" |
| ## |
| ## You will in general want your comments and strings to come last, |
| ## because syntax highlighting rules will be applied in the order they |
| ## are read in. |
| ## |
| # color brightyellow "<[^= ]*>" ""(\\.|[^\"])*"" |
| ## |
| ## This string is VERY resource intensive!!! |
| # color brightyellow start=""(\\.|[^\"])*\\ *$" end="^(\\.|[^\"])*"" |
| ## |
| ## And we want to have some nice comment highlighting too |
| # color brightblue "//.*" |
| # color brightblue start="/\*" end="\*/" |
| |
| ## Here is a short example for HTML |
| # syntax "HTML" "\.html$" |
| # color blue start="<" end=">" |
| # color red "&[^; ]*;" |
| |
| ## Here is a short example for TeX files |
| # syntax "TeX" "\.tex$" |
| # color green "\\.|\\[A-Za-z]*" |
| # color magenta "[{}]" |
| # color blue "%.*" |
| |
| ## Here is an example for quoted emails (under e.g. mutt) |
| # syntax "mutt" |
| # color green "^>.*" |
| |
| ## Here is an example for groff |
| ## |
| # syntax "groff" "\.ms$" "\.mm$" "\.me$" "\.tmac$" "^tmac." ".rof" |
| ## The argument of .nr or .ds |
| # color cyan "^\.ds [^ ]*" |
| # color cyan "^\.nr [^ ]*" |
| ## Single character escapes |
| # color brightmagenta "\\." |
| ## Highlight the argument of \f or \s in the same color |
| # color brightmagenta "\\f." |
| # color brightmagenta "\\f\(.." |
| # color brightmagenta "\\s(\+|\-)?[0-9]" |
| ## \n |
| # color cyan "(\\|\\\\)n." |
| # color cyan "(\\|\\\\)n\(.." |
| # color cyan start="(\\|\\\\)n\[" end="]" |
| ## Requests |
| # color brightgreen "^\. *[^ ]*" |
| ## Comments |
| # color yellow "^\.\\\".*$" |
| ## Strings |
| # color green "(\\|\\\\)\*." |
| # color green "(\\|\\\\)\*\(.." |
| # color green start="(\\|\\\\)\*\[" end="]" |
| ## Characters |
| # color brightred "\\\(.." |
| # color brightred start="\\\[" end="]" |
| ## Macro arguments |
| # color brightcyan "\\\\\$[1-9]" |
| |
| ## Here is an example for perl |
| ## |
| # syntax "perl" "\.p[lm]$" |
| # color red "\<(accept|alarm|atan2|bin(d|mode)|c(aller|h(dir|mod|op|own|root)|lose(dir)?|onnect|os|rypt)|d(bm(close|open)|efined|elete|ie|o|ump)|e(ach|of|val|x(ec|ists|it|p))|f(cntl|ileno|lock|ork)|get(c|login|peername|pgrp|ppid|priority|pwnam|(host|net|proto|serv)byname|pwuid|grgid|(host|net)byaddr|protobynumber|servbyport)|([gs]et|end)(pw|gr|host|net|proto|serv)ent|getsock(name|opt)|gmtime|goto|grep|hex|index|int|ioctl|join|keys|kill|last|length|link|listen|local(time)?|log|lstat|m|mkdir|msg(ctl|get|snd|rcv)|next|oct|open(dir)?|ord|pack|pipe|pop|printf?|push|q|qq|qx|rand|re(ad(dir|link)?|cv|do|name|quire|set|turn|verse|winddir)|rindex|rmdir|s|scalar|seek|seekdir|se(lect|mctl|mget|mop|nd|tpgrp|tpriority|tsockopt)|shift|shm(ctl|get|read|write)|shutdown|sin|sleep|socket(pair)?|sort|spli(ce|t)|sprintf|sqrt|srand|stat|study|substr|symlink|sys(call|read|tem|write)|tell(dir)?|time|tr|y|truncate|umask|un(def|link|pack|shift)|utime|values|vec|wait(pid)?|wantarray|warn|write)\>" |
| # color magenta "\<(continue|else|elsif|do|for|foreach|if|unless|until|while|eq|ne|lt|gt|le|ge|cmp|x|my|sub|use|package|can|isa)\>" |
| # color cyan start="[$@%]" end="( |\\W|-)" |
| # color yellow "".*"|qq\|.*\|" |
| # color white "[sm]/.*/" |
| # color white start="(^use| = new)" end=";" |
| # color green "#.*" |
| # color yellow start="<< 'STOP'" end="STOP" |
| |
| ## Here is an example for Java source |
| ## |
| # syntax "Java source" "\.java$" |
| # color green "\<(boolean|byte|char|double|float|int|long|new|short|this|transient|void)\>" |
| # color red "\<(break|case|catch|continue|default|do|else|finally|for|if|return|switch|throw|try|while)\>" |
| # color cyan "\<(abstract|class|extends|final|implements|import|instanceof|interface|native|package|private|protected|public|static|strictfp|super|synchronized|throws|volatile)\>" |
| # color red ""[^\"]*"" |
| # color yellow "\<(true|false|null)\>" |
| # color blue "//.*" |
| # color blue start="/\*" end="\*/" |
| # color brightblue start="/\*\*" end="\*/" |
| # color brightgreen,green " +$" |
| |
| ## Here is an example for your .nanorc |
| ## |
| #syntax "nanorc" "(\.|/|)nanorc$" |
| ## highlight possible errors and parameters |
| #color brightwhite "^ *(set|unset|syntax|color).*$" |
| ## set, unset and syntax |
| #color cyan "^ *(set|unset) +(autoindent|backup|backupdir|const|cut|fill|historylog|mouse|multibuffer|noconvert|nofollow|nohelp|nowrap|operatingdir|preserve|quotestr|rebinddelete|regexp|smarthome|smooth|speller|suspend|tabsize|tempfile|view)" |
| #color green "^ *(set|unset|syntax)\>" |
| ## colors |
| #color yellow "^ *color +(bright)?(white|black|red|blue|green|yellow|magenta|cyan)(,(white|black|red|blue|green|yellow|magenta|cyan))?\>" |
| #color magenta "^ *color\>" "\<(start|end)=" |
| ## strings |
| #color white "\"(\\.|[^\"])*\"" |
| ## comments |
| #color blue "^ *#.*$" |