| /* $Id$ */ |
| /************************************************************************** |
| * winio.c * |
| * * |
| * Copyright (C) 1999-2004 Chris Allegretta * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License as published by * |
| * the Free Software Foundation; either version 2, or (at your option) * |
| * any later version. * |
| * * |
| * This program is distributed in the hope that it will be useful, * |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
| * GNU General Public License for more details. * |
| * * |
| * You should have received a copy of the GNU General Public License * |
| * along with this program; if not, write to the Free Software * |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * |
| * * |
| **************************************************************************/ |
| |
| #include "config.h" |
| |
| #include <stdarg.h> |
| #include <string.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <ctype.h> |
| #include <assert.h> |
| #include "proto.h" |
| #include "nano.h" |
| |
| static int statblank = 0; /* Number of keystrokes left after |
| we call statusbar(), before we |
| actually blank the statusbar */ |
| |
| /* Control character compatibility: |
| * |
| * - NANO_BACKSPACE_KEY is Ctrl-H, which is Backspace under ASCII, ANSI, |
| * VT100, and VT220. |
| * - NANO_TAB_KEY is Ctrl-I, which is Tab under ASCII, ANSI, VT100, |
| * VT220, and VT320. |
| * - NANO_ENTER_KEY is Ctrl-M, which is Enter under ASCII, ANSI, VT100, |
| * VT220, and VT320. |
| * - NANO_XON_KEY is Ctrl-Q, which is XON under ASCII, ANSI, VT100, |
| * VT220, and VT320. |
| * - NANO_XOFF_KEY is Ctrl-S, which is XOFF under ASCII, ANSI, VT100, |
| * VT220, and VT320. |
| * - NANO_CONTROL_8 is Ctrl-8 (Ctrl-?), which is Delete under ASCII, |
| * ANSI, VT100, and VT220, and which is Backspace under VT320. |
| * |
| * Note: VT220 and VT320 also generate Esc [ 3 ~ for Delete. By |
| * default, xterm assumes it's running on a VT320 and generates Ctrl-8 |
| * (Ctrl-?) for Backspace and Esc [ 3 ~ for Delete. This causes |
| * problems for VT100-derived terminals such as the FreeBSD console, |
| * which expect Ctrl-H for Backspace and Ctrl-8 (Ctrl-?) for Delete, and |
| * on which the VT320 sequences are translated by the keypad to KEY_DC |
| * and [nothing]. We work around this conflict via the REBIND_DELETE |
| * flag: if it's not set, we assume VT320 compatibility, and if it is, |
| * we assume VT100 compatibility. Thanks to Lee Nelson and Wouter van |
| * Hemel for helping work this conflict out. |
| * |
| * Escape sequence compatibility: |
| * |
| * We support escape sequences for ANSI, VT100, VT220, VT320, the Linux |
| * console, the FreeBSD console, the Hurd console (a.k.a. the Mach |
| * console), xterm, rxvt, and Eterm. Among these, there are several |
| * conflicts and omissions, outlined as follows: |
| * |
| * - Tab on ANSI == PageUp on FreeBSD console; the former is omitted. |
| * (Ctrl-I is also Tab on ANSI, which we already support.) |
| * - PageDown on FreeBSD console == Center (5) on numeric keypad with |
| * NumLock off on Linux console; the latter is omitted. (The editing |
| * keypad key is more important to have working than the numeric |
| * keypad key, because the latter has no value when NumLock is off.) |
| * - F1 on FreeBSD console == the mouse key on xterm/rxvt/Eterm; the |
| * latter is omitted. (Mouse input will only work properly if the |
| * extended keypad value KEY_MOUSE is generated on mouse events |
| * instead of the escape sequence.) |
| * - F9 on FreeBSD console == PageDown on Hurd console; the former is |
| * omitted. (The editing keypad is more important to have working |
| * than the function keys, because the functions of the former are not |
| * arbitrary and the functions of the latter are.) |
| * - F10 on FreeBSD console == PageUp on Hurd console; the former is |
| * omitted. (Same as above.) |
| * - F13 on FreeBSD console == End on Hurd console; the former is |
| * omitted. (Same as above.) |
| * |
| * Note that Center (5) on the numeric keypad with NumLock off can also |
| * be the Begin key. */ |
| |
| #ifndef NANO_SMALL |
| /* Reset all the input routines that rely on character sequences. */ |
| void reset_kbinput(void) |
| { |
| get_translated_kbinput(0, NULL, TRUE); |
| get_ascii_kbinput(0, 0, TRUE); |
| get_untranslated_kbinput(0, 0, FALSE, TRUE); |
| } |
| #endif |
| |
| /* Put back the input character stored in kbinput. If meta_key is TRUE, |
| * put back the Escape character after putting back kbinput. */ |
| void unget_kbinput(int kbinput, bool meta_key) |
| { |
| ungetch(kbinput); |
| if (meta_key) |
| ungetch(NANO_CONTROL_3); |
| } |
| |
| /* Read in a single input character. If it's ignored, swallow it and go |
| * on. Otherwise, try to translate it from ASCII, extended keypad |
| * values, and/or escape sequences. Set meta_key to TRUE when we get a |
| * meta sequence. Supported extended keypad values consist of [arrow |
| * key], Ctrl-[arrow key], Shift-[arrow key], Enter, Backspace, the |
| * editing keypad (Insert, Delete, Home, End, PageUp, and PageDown), the |
| * function keypad (F1-F14), and the numeric keypad with NumLock off. |
| * Assume nodelay(win) is FALSE. */ |
| int get_kbinput(WINDOW *win, bool *meta_key) |
| { |
| int kbinput, retval = ERR; |
| bool es; |
| |
| #ifndef NANO_SMALL |
| allow_pending_sigwinch(TRUE); |
| #endif |
| |
| *meta_key = FALSE; |
| |
| while (retval == ERR) { |
| /* Read a character using blocking input, since using |
| * non-blocking input will eat up all unused CPU. Then pass it |
| * to get_translated_kbinput(). Continue until we get a |
| * complete sequence. */ |
| kbinput = wgetch(win); |
| retval = get_translated_kbinput(kbinput, &es |
| #ifndef NANO_SMALL |
| , FALSE |
| #endif |
| ); |
| |
| /* If we got an escape sequence, read it in, including the |
| * initial non-escape, as verbatim input. */ |
| if (es) { |
| int *escape_seq = NULL; |
| size_t es_len; |
| |
| /* First, assume that we got a meta sequence. Set meta_key |
| * to TRUE and save the character we got as the result. We |
| * do this so that if the keyboard buffer is full when we |
| * send back the character we got below (in which case we'll |
| * lose that character), it'll still be properly interpreted |
| * as a meta sequence. */ |
| *meta_key = TRUE; |
| retval = tolower(kbinput); |
| |
| /* Next, send back the character we got and read in the |
| * complete escape sequence. */ |
| unget_kbinput(kbinput, FALSE); |
| escape_seq = get_verbatim_kbinput(win, escape_seq, &es_len, |
| FALSE); |
| |
| /* If the escape sequence is more than one character |
| * long, set meta_key to FALSE, translate the escape |
| * sequence into the corresponding key value, and save |
| * that as the result. */ |
| if (es_len > 1) { |
| bool ignore_seq; |
| |
| *meta_key = FALSE; |
| retval = get_escape_seq_kbinput(escape_seq, es_len, |
| &ignore_seq); |
| |
| if (retval == ERR && !ignore_seq) { |
| /* This escape sequence is unrecognized. Send it |
| * back. */ |
| for (; es_len > 1; es_len--) |
| unget_kbinput(escape_seq[es_len - 1], FALSE); |
| retval = escape_seq[0]; |
| } |
| } |
| free(escape_seq); |
| } |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "get_kbinput(): kbinput = %d, meta_key = %d\n", kbinput, (int)*meta_key); |
| #endif |
| |
| #ifndef NANO_SMALL |
| allow_pending_sigwinch(FALSE); |
| #endif |
| |
| return retval; |
| } |
| |
| /* Translate acceptable ASCII, extended keypad values, and escape |
| * sequences into their corresponding key values. Set es to TRUE when |
| * we get an escape sequence. Assume nodelay(win) is FALSE. */ |
| int get_translated_kbinput(int kbinput, bool *es |
| #ifndef NANO_SMALL |
| , bool reset |
| #endif |
| ) |
| { |
| static int escapes = 0; |
| static size_t ascii_digits = 0; |
| int retval = ERR; |
| |
| #ifndef NANO_SMALL |
| if (reset) { |
| escapes = 0; |
| ascii_digits = 0; |
| return ERR; |
| } |
| #endif |
| |
| *es = FALSE; |
| |
| switch (kbinput) { |
| case ERR: |
| break; |
| case NANO_CONTROL_3: |
| /* Increment the escape counter. */ |
| escapes++; |
| switch (escapes) { |
| case 1: |
| /* One escape: wait for more input. */ |
| case 2: |
| /* Two escapes: wait for more input. */ |
| break; |
| default: |
| /* More than two escapes: reset the escape counter |
| * and wait for more input. */ |
| escapes = 0; |
| } |
| break; |
| #if !defined(NANO_SMALL) && defined(KEY_RESIZE) |
| /* Since we don't change the default SIGWINCH handler when |
| * NANO_SMALL is defined, KEY_RESIZE is never generated. Also, |
| * Slang and SunOS 5.7-5.9 don't support KEY_RESIZE. */ |
| case KEY_RESIZE: |
| break; |
| #endif |
| #ifdef PDCURSES |
| case KEY_SHIFT_L: |
| case KEY_SHIFT_R: |
| case KEY_CONTROL_L: |
| case KEY_CONTROL_R: |
| case KEY_ALT_L: |
| case KEY_ALT_R: |
| break; |
| #endif |
| default: |
| switch (escapes) { |
| case 0: |
| switch (kbinput) { |
| case NANO_CONTROL_8: |
| retval = ISSET(REBIND_DELETE) ? |
| NANO_DELETE_KEY : NANO_BACKSPACE_KEY; |
| break; |
| case KEY_DOWN: |
| retval = NANO_NEXTLINE_KEY; |
| break; |
| case KEY_UP: |
| retval = NANO_PREVLINE_KEY; |
| break; |
| case KEY_LEFT: |
| retval = NANO_BACK_KEY; |
| break; |
| case KEY_RIGHT: |
| retval = NANO_FORWARD_KEY; |
| break; |
| #ifdef KEY_HOME |
| /* HP-UX 10 and 11 don't support KEY_HOME. */ |
| case KEY_HOME: |
| retval = NANO_HOME_KEY; |
| break; |
| #endif |
| case KEY_BACKSPACE: |
| retval = NANO_BACKSPACE_KEY; |
| break; |
| case KEY_DC: |
| retval = ISSET(REBIND_DELETE) ? |
| NANO_BACKSPACE_KEY : NANO_DELETE_KEY; |
| break; |
| case KEY_IC: |
| retval = NANO_INSERTFILE_KEY; |
| break; |
| case KEY_NPAGE: |
| retval = NANO_NEXTPAGE_KEY; |
| break; |
| case KEY_PPAGE: |
| retval = NANO_PREVPAGE_KEY; |
| break; |
| case KEY_ENTER: |
| retval = NANO_ENTER_KEY; |
| break; |
| case KEY_A1: /* Home (7) on numeric keypad |
| * with NumLock off. */ |
| retval = NANO_HOME_KEY; |
| break; |
| case KEY_A3: /* PageUp (9) on numeric keypad |
| * with NumLock off. */ |
| retval = NANO_PREVPAGE_KEY; |
| break; |
| case KEY_B2: /* Center (5) on numeric keypad |
| * with NumLock off. */ |
| break; |
| case KEY_C1: /* End (1) on numeric keypad |
| * with NumLock off. */ |
| retval = NANO_END_KEY; |
| break; |
| case KEY_C3: /* PageDown (4) on numeric |
| * keypad with NumLock off. */ |
| retval = NANO_NEXTPAGE_KEY; |
| break; |
| #ifdef KEY_BEG |
| /* Slang doesn't support KEY_BEG. */ |
| case KEY_BEG: /* Center (5) on numeric keypad |
| * with NumLock off. */ |
| break; |
| #endif |
| #ifdef KEY_END |
| /* HP-UX 10 and 11 don't support KEY_END. */ |
| case KEY_END: |
| retval = NANO_END_KEY; |
| break; |
| #endif |
| #ifdef KEY_SUSPEND |
| /* Slang doesn't support KEY_SUSPEND. */ |
| case KEY_SUSPEND: |
| retval = NANO_SUSPEND_KEY; |
| break; |
| #endif |
| #ifdef KEY_SLEFT |
| /* Slang doesn't support KEY_SLEFT. */ |
| case KEY_SLEFT: |
| retval = NANO_BACK_KEY; |
| break; |
| #endif |
| #ifdef KEY_SRIGHT |
| /* Slang doesn't support KEY_SRIGHT. */ |
| case KEY_SRIGHT: |
| retval = NANO_FORWARD_KEY; |
| break; |
| #endif |
| default: |
| retval = kbinput; |
| break; |
| } |
| break; |
| case 1: |
| /* One escape followed by a non-escape: escape |
| * sequence mode. Reset the escape counter and set |
| * es to TRUE. */ |
| escapes = 0; |
| *es = TRUE; |
| break; |
| case 2: |
| switch (kbinput) { |
| case '0': |
| case '1': |
| case '2': |
| case '3': |
| case '4': |
| case '5': |
| case '6': |
| case '7': |
| case '8': |
| case '9': |
| /* Two escapes followed by one or more |
| * digits: ASCII character sequence mode. |
| * If the digit sequence's range is limited |
| * to 2XX (the first digit is in the '0' to |
| * '2' range and it's the first digit, or if |
| * it's in the full digit range and it's not |
| * the first digit), increment the ASCII |
| * digit counter and interpret the digit. |
| * If the digit sequence's range is not |
| * limited to 2XX, fall through. */ |
| if (kbinput <= '2' || ascii_digits > 0) { |
| ascii_digits++; |
| kbinput = get_ascii_kbinput(kbinput, |
| ascii_digits |
| #ifndef NANO_SMALL |
| , FALSE |
| #endif |
| ); |
| |
| if (kbinput != ERR) { |
| /* If we've read in a complete ASCII |
| * digit sequence, reset the ASCII |
| * digit counter and the escape |
| * counter and save the corresponding |
| * ASCII character as the result. */ |
| ascii_digits = 0; |
| escapes = 0; |
| retval = kbinput; |
| } |
| } |
| break; |
| default: |
| /* Reset the escape counter. */ |
| escapes = 0; |
| if (ascii_digits == 0) |
| /* Two escapes followed by a non-digit |
| * or a digit that would create an ASCII |
| * digit sequence greater than 2XX, and |
| * we're not in the middle of an ASCII |
| * character sequence: control character |
| * sequence mode. Interpret the control |
| * sequence and save the corresponding |
| * control character as the result. */ |
| retval = get_control_kbinput(kbinput); |
| else { |
| /* If we were in the middle of an ASCII |
| * character sequence, reset the ASCII |
| * digit counter and save the character |
| * we got as the result. */ |
| ascii_digits = 0; |
| retval = kbinput; |
| } |
| } |
| } |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "get_translated_kbinput(): kbinput = %d, es = %d, escapes = %d, ascii_digits = %lu, retval = %d\n", kbinput, (int)*es, escapes, (unsigned long)ascii_digits, retval); |
| #endif |
| |
| /* Return the result. */ |
| return retval; |
| } |
| |
| /* Translate an ASCII character sequence: turn a three-digit decimal |
| * ASCII code from 000-255 into its corresponding ASCII character. */ |
| int get_ascii_kbinput(int kbinput, size_t ascii_digits |
| #ifndef NANO_SMALL |
| , bool reset |
| #endif |
| ) |
| { |
| static int ascii_kbinput = 0; |
| int retval = ERR; |
| |
| #ifndef NANO_SMALL |
| if (reset) { |
| ascii_kbinput = 0; |
| return ERR; |
| } |
| #endif |
| |
| switch (ascii_digits) { |
| case 1: |
| /* Read in the first of the three ASCII digits. */ |
| switch (kbinput) { |
| /* Add the digit we got to the 100's position of the |
| * ASCII character sequence holder. */ |
| case '0': |
| case '1': |
| case '2': |
| ascii_kbinput += (kbinput - '0') * 100; |
| break; |
| default: |
| retval = kbinput; |
| } |
| break; |
| case 2: |
| /* Read in the second of the three ASCII digits. */ |
| switch (kbinput) { |
| /* Add the digit we got to the 10's position of the |
| * ASCII character sequence holder. */ |
| case '0': |
| case '1': |
| case '2': |
| case '3': |
| case '4': |
| case '5': |
| ascii_kbinput += (kbinput - '0') * 10; |
| break; |
| case '6': |
| case '7': |
| case '8': |
| case '9': |
| if (ascii_kbinput < 200) { |
| ascii_kbinput += (kbinput - '0') * 10; |
| break; |
| } |
| default: |
| retval = kbinput; |
| } |
| break; |
| case 3: |
| /* Read in the third of the three ASCII digits. */ |
| switch (kbinput) { |
| /* Add the digit we got to the 1's position of the ASCII |
| * character sequence holder, and save the corresponding |
| * ASCII character as the result. */ |
| case '0': |
| case '1': |
| case '2': |
| case '3': |
| case '4': |
| case '5': |
| ascii_kbinput += (kbinput - '0'); |
| retval = ascii_kbinput; |
| break; |
| case '6': |
| case '7': |
| case '8': |
| case '9': |
| if (ascii_kbinput < 250) { |
| ascii_kbinput += (kbinput - '0'); |
| retval = ascii_kbinput; |
| break; |
| } |
| default: |
| retval = kbinput; |
| } |
| break; |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "get_ascii_kbinput(): kbinput = %d, ascii_digits = %lu, ascii_kbinput = %d, retval = %d\n", kbinput, (unsigned long)ascii_digits, ascii_kbinput, retval); |
| #endif |
| |
| /* If the result is an ASCII character, reset the ASCII character |
| * sequence holder. */ |
| if (retval != ERR) |
| ascii_kbinput = 0; |
| |
| return retval; |
| } |
| |
| /* Translate a control character sequence: turn an ASCII non-control |
| * character into its corresponding control character. */ |
| int get_control_kbinput(int kbinput) |
| { |
| int retval = ERR; |
| |
| /* We don't handle Ctrl-2 here, since Esc Esc 2 could be the first |
| * part of an ASCII character sequence. */ |
| |
| /* Ctrl-2 (Ctrl-Space) == Ctrl-@ == Ctrl-` */ |
| if (kbinput == ' ' || kbinput == '@' || kbinput == '`') |
| retval = NANO_CONTROL_SPACE; |
| /* Ctrl-3 (Ctrl-[, Esc) to Ctrl-7 (Ctrl-_) */ |
| else if (kbinput >= '3' && kbinput <= '7') |
| retval = kbinput - 24; |
| /* Ctrl-8 (Ctrl-?) */ |
| else if (kbinput == '8' || kbinput == '?') |
| retval = NANO_CONTROL_8; |
| /* Ctrl-A to Ctrl-_ */ |
| else if (kbinput >= 'A' && kbinput <= '_') |
| retval = kbinput - 64; |
| /* Ctrl-a to Ctrl-~ */ |
| else if (kbinput >= 'a' && kbinput <= '~') |
| retval = kbinput - 96; |
| else |
| retval = kbinput; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "get_control_kbinput(): kbinput = %d, retval = %d\n", kbinput, retval); |
| #endif |
| |
| return retval; |
| } |
| |
| /* Translate escape sequences, most of which correspond to extended |
| * keypad values, nto their corresponding key values. These sequences |
| * are generated when the keypad doesn't support the needed keys. If |
| * the escape sequence is recognized but we want to ignore it, return |
| * ERR and set ignore_seq to TRUE; if it's unrecognized, return ERR and |
| * set ignore_seq to FALSE. Assume that Escape has already been read |
| * in. */ |
| int get_escape_seq_kbinput(int *escape_seq, size_t es_len, bool |
| *ignore_seq) |
| { |
| int retval = ERR; |
| |
| *ignore_seq = FALSE; |
| |
| if (es_len > 1) { |
| switch (escape_seq[0]) { |
| case 'O': |
| switch (escape_seq[1]) { |
| case '2': |
| if (es_len >= 3) { |
| switch (escape_seq[2]) { |
| case 'P': /* Esc O 2 P == F13 on |
| * xterm. */ |
| retval = KEY_F(13); |
| break; |
| case 'Q': /* Esc O 2 Q == F14 on |
| * xterm. */ |
| retval = KEY_F(14); |
| break; |
| } |
| } |
| break; |
| case 'A': /* Esc O A == Up on VT100/VT320/xterm. */ |
| case 'B': /* Esc O B == Down on |
| * VT100/VT320/xterm. */ |
| case 'C': /* Esc O C == Right on |
| * VT100/VT320/xterm. */ |
| case 'D': /* Esc O D == Left on |
| * VT100/VT320/xterm. */ |
| retval = get_escape_seq_abcd(escape_seq[1]); |
| break; |
| case 'E': /* Esc O E == Center (5) on numeric keypad |
| * with NumLock off on xterm. */ |
| *ignore_seq = TRUE; |
| break; |
| case 'F': /* Esc O F == End on xterm. */ |
| retval = NANO_END_KEY; |
| break; |
| case 'H': /* Esc O H == Home on xterm. */ |
| retval = NANO_HOME_KEY; |
| break; |
| case 'M': /* Esc O M == Enter on numeric keypad with |
| * NumLock off on VT100/VT220/VT320/xterm/ |
| * Eterm. */ |
| retval = NANO_ENTER_KEY; |
| break; |
| case 'P': /* Esc O P == F1 on VT100/VT220/VT320/Hurd |
| * console. */ |
| retval = KEY_F(1); |
| break; |
| case 'Q': /* Esc O Q == F2 on VT100/VT220/VT320/Hurd |
| * console. */ |
| retval = KEY_F(2); |
| break; |
| case 'R': /* Esc O R == F3 on VT100/VT220/VT320/Hurd |
| * console. */ |
| retval = KEY_F(3); |
| break; |
| case 'S': /* Esc O S == F4 on VT100/VT220/VT320/Hurd |
| * console. */ |
| retval = KEY_F(4); |
| break; |
| case 'T': /* Esc O T == F5 on Hurd console. */ |
| retval = KEY_F(5); |
| break; |
| case 'U': /* Esc O U == F6 on Hurd console. */ |
| retval = KEY_F(6); |
| break; |
| case 'V': /* Esc O V == F7 on Hurd console. */ |
| retval = KEY_F(7); |
| break; |
| case 'W': /* Esc O W == F8 on Hurd console. */ |
| retval = KEY_F(8); |
| break; |
| case 'X': /* Esc O X == F9 on Hurd console. */ |
| retval = KEY_F(9); |
| break; |
| case 'Y': /* Esc O Y == F10 on Hurd console. */ |
| retval = KEY_F(10); |
| break; |
| case 'a': /* Esc O a == Ctrl-Up on rxvt. */ |
| case 'b': /* Esc O b == Ctrl-Down on rxvt. */ |
| case 'c': /* Esc O c == Ctrl-Right on rxvt. */ |
| case 'd': /* Esc O d == Ctrl-Left on rxvt. */ |
| retval = get_escape_seq_abcd(escape_seq[1]); |
| break; |
| case 'j': /* Esc O j == '*' on numeric keypad with |
| * NumLock off on VT100/VT220/VT320/xterm/ |
| * rxvt. */ |
| retval = '*'; |
| break; |
| case 'k': /* Esc O k == '+' on numeric keypad with |
| * NumLock off on VT100/VT220/VT320/xterm/ |
| * rxvt. */ |
| retval = '+'; |
| break; |
| case 'l': /* Esc O l == ',' on numeric keypad with |
| * NumLock off on VT100/VT220/VT320/xterm/ |
| * rxvt. */ |
| retval = '+'; |
| break; |
| case 'm': /* Esc O m == '-' on numeric keypad with |
| * NumLock off on VT100/VT220/VT320/xterm/ |
| * rxvt. */ |
| retval = '-'; |
| break; |
| case 'n': /* Esc O n == Delete (.) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * xterm/rxvt. */ |
| retval = NANO_DELETE_KEY; |
| break; |
| case 'o': /* Esc O o == '/' on numeric keypad with |
| * NumLock off on VT100/VT220/VT320/xterm/ |
| * rxvt. */ |
| retval = '/'; |
| break; |
| case 'p': /* Esc O p == Insert (0) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_INSERTFILE_KEY; |
| break; |
| case 'q': /* Esc O q == End (1) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_END_KEY; |
| break; |
| case 'r': /* Esc O r == Down (2) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_NEXTLINE_KEY; |
| break; |
| case 's': /* Esc O s == PageDown (3) on numeric |
| * keypad with NumLock off on VT100/VT220/ |
| * VT320/rxvt. */ |
| retval = NANO_NEXTPAGE_KEY; |
| break; |
| case 't': /* Esc O t == Left (4) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_BACK_KEY; |
| break; |
| case 'u': /* Esc O u == Center (5) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt/Eterm. */ |
| *ignore_seq = TRUE; |
| break; |
| case 'v': /* Esc O v == Right (6) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_FORWARD_KEY; |
| break; |
| case 'w': /* Esc O w == Home (7) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_HOME_KEY; |
| break; |
| case 'x': /* Esc O x == Up (8) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_PREVLINE_KEY; |
| break; |
| case 'y': /* Esc O y == PageUp (9) on numeric keypad |
| * with NumLock off on VT100/VT220/VT320/ |
| * rxvt. */ |
| retval = NANO_PREVPAGE_KEY; |
| break; |
| } |
| break; |
| case 'o': |
| switch (escape_seq[1]) { |
| case 'a': /* Esc o a == Ctrl-Up on Eterm. */ |
| case 'b': /* Esc o b == Ctrl-Down on Eterm. */ |
| case 'c': /* Esc o c == Ctrl-Right on Eterm. */ |
| case 'd': /* Esc o d == Ctrl-Left on Eterm. */ |
| retval = get_escape_seq_abcd(escape_seq[1]); |
| break; |
| } |
| break; |
| case '[': |
| switch (escape_seq[1]) { |
| case '1': |
| if (es_len >= 3) { |
| switch (escape_seq[2]) { |
| case '1': /* Esc [ 1 1 ~ == F1 on rxvt/ |
| * Eterm. */ |
| retval = KEY_F(1); |
| break; |
| case '2': /* Esc [ 1 2 ~ == F2 on rxvt/ |
| * Eterm. */ |
| retval = KEY_F(2); |
| break; |
| case '3': /* Esc [ 1 3 ~ == F3 on rxvt/ |
| * Eterm. */ |
| retval = KEY_F(3); |
| break; |
| case '4': /* Esc [ 1 4 ~ == F4 on rxvt/ |
| * Eterm. */ |
| retval = KEY_F(4); |
| break; |
| case '5': /* Esc [ 1 5 ~ == F5 on xterm/ |
| * rxvt/Eterm. */ |
| retval = KEY_F(5); |
| break; |
| case '7': /* Esc [ 1 7 ~ == F6 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(6); |
| break; |
| case '8': /* Esc [ 1 8 ~ == F7 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(7); |
| break; |
| case '9': /* Esc [ 1 9 ~ == F8 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(8); |
| break; |
| case ';': |
| if (es_len >= 4) { |
| switch (escape_seq[3]) { |
| case '2': |
| if (es_len >= 5) { |
| switch (escape_seq[4]) { |
| case 'A': /* Esc [ 1 ; 2 A == Shift-Up on |
| * xterm. */ |
| case 'B': /* Esc [ 1 ; 2 B == Shift-Down on |
| * xterm. */ |
| case 'C': /* Esc [ 1 ; 2 C == Shift-Right on |
| * xterm. */ |
| case 'D': /* Esc [ 1 ; 2 D == Shift-Left on |
| * xterm. */ |
| retval = get_escape_seq_abcd(escape_seq[4]); |
| break; |
| } |
| } |
| break; |
| case '5': |
| if (es_len >= 5) { |
| switch (escape_seq[4]) { |
| case 'A': /* Esc [ 1 ; 5 A == Ctrl-Up on |
| * xterm. */ |
| case 'B': /* Esc [ 1 ; 5 B == Ctrl-Down on |
| * xterm. */ |
| case 'C': /* Esc [ 1 ; 5 C == Ctrl-Right on |
| * xterm. */ |
| case 'D': /* Esc [ 1 ; 5 D == Ctrl-Left on |
| * xterm. */ |
| retval = get_escape_seq_abcd(escape_seq[4]); |
| break; |
| } |
| } |
| break; |
| } |
| } |
| break; |
| default: /* Esc [ 1 ~ == Home on |
| * VT320/Linux console. */ |
| retval = NANO_HOME_KEY; |
| break; |
| } |
| } |
| break; |
| case '2': |
| if (es_len >= 3) { |
| switch (escape_seq[2]) { |
| case '0': /* Esc [ 2 0 ~ == F9 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(9); |
| break; |
| case '1': /* Esc [ 2 1 ~ == F10 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(10); |
| break; |
| case '3': /* Esc [ 2 3 ~ == F11 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(11); |
| break; |
| case '4': /* Esc [ 2 4 ~ == F12 on |
| * VT220/VT320/Linux console/ |
| * xterm/rxvt/Eterm. */ |
| retval = KEY_F(12); |
| break; |
| case '5': /* Esc [ 2 5 ~ == F13 on |
| * VT220/VT320/Linux console/ |
| * rxvt/Eterm. */ |
| retval = KEY_F(13); |
| break; |
| case '6': /* Esc [ 2 6 ~ == F14 on |
| * VT220/VT320/Linux console/ |
| * rxvt/Eterm. */ |
| retval = KEY_F(14); |
| break; |
| default: /* Esc [ 2 ~ == Insert on |
| * VT220/VT320/Linux console/ |
| * xterm. */ |
| retval = NANO_INSERTFILE_KEY; |
| break; |
| } |
| } |
| break; |
| case '3': /* Esc [ 3 ~ == Delete on VT220/VT320/ |
| * Linux console/xterm. */ |
| retval = NANO_DELETE_KEY; |
| break; |
| case '4': /* Esc [ 4 ~ == End on VT220/VT320/Linux |
| * console/xterm. */ |
| retval = NANO_END_KEY; |
| break; |
| case '5': /* Esc [ 5 ~ == PageUp on VT220/VT320/ |
| * Linux console/xterm; Esc [ 5 ^ == |
| * PageUp on Eterm. */ |
| retval = NANO_PREVPAGE_KEY; |
| break; |
| case '6': /* Esc [ 6 ~ == PageDown on VT220/VT320/ |
| * Linux console/xterm; Esc [ 6 ^ == |
| * PageDown on Eterm. */ |
| retval = NANO_NEXTPAGE_KEY; |
| break; |
| case '7': /* Esc [ 7 ~ == Home on rxvt. */ |
| retval = NANO_HOME_KEY; |
| break; |
| case '8': /* Esc [ 8 ~ == End on rxvt. */ |
| retval = NANO_END_KEY; |
| break; |
| case '9': /* Esc [ 9 == Delete on Hurd console. */ |
| retval = NANO_DELETE_KEY; |
| break; |
| case '@': /* Esc [ @ == Insert on Hurd console. */ |
| retval = NANO_INSERTFILE_KEY; |
| break; |
| case 'A': /* Esc [ A == Up on ANSI/VT220/Linux |
| * console/FreeBSD console/Hurd console/ |
| * rxvt/Eterm. */ |
| case 'B': /* Esc [ B == Down on ANSI/VT220/Linux |
| * console/FreeBSD console/Hurd console/ |
| * rxvt/Eterm. */ |
| case 'C': /* Esc [ C == Right on ANSI/VT220/Linux |
| * console/FreeBSD console/Hurd console/ |
| * rxvt/Eterm. */ |
| case 'D': /* Esc [ D == Left on ANSI/VT220/Linux |
| * console/FreeBSD console/Hurd console/ |
| * rxvt/Eterm. */ |
| retval = get_escape_seq_abcd(escape_seq[1]); |
| break; |
| case 'E': /* Esc [ E == Center (5) on numeric keypad |
| * with NumLock off on FreeBSD console. */ |
| *ignore_seq = TRUE; |
| break; |
| case 'F': /* Esc [ F == End on FreeBSD |
| * console/Eterm. */ |
| retval = NANO_END_KEY; |
| break; |
| case 'G': /* Esc [ G == PageDown on FreeBSD |
| * console. */ |
| retval = NANO_NEXTPAGE_KEY; |
| break; |
| case 'H': /* Esc [ H == Home on ANSI/VT220/FreeBSD |
| * console/Hurd console/Eterm. */ |
| retval = NANO_HOME_KEY; |
| break; |
| case 'I': /* Esc [ I == PageUp on FreeBSD |
| * console. */ |
| retval = NANO_PREVPAGE_KEY; |
| break; |
| case 'L': /* Esc [ L == Insert on ANSI/FreeBSD |
| * console. */ |
| retval = NANO_INSERTFILE_KEY; |
| break; |
| case 'M': /* Esc [ M == F1 on FreeBSD console. */ |
| retval = KEY_F(1); |
| break; |
| case 'N': /* Esc [ N == F2 on FreeBSD console. */ |
| retval = KEY_F(2); |
| break; |
| case 'O': |
| if (es_len >= 3) { |
| switch (escape_seq[2]) { |
| case 'P': /* Esc [ O P == F1 on |
| * xterm. */ |
| retval = KEY_F(1); |
| break; |
| case 'Q': /* Esc [ O Q == F2 on |
| * xterm. */ |
| retval = KEY_F(2); |
| break; |
| case 'R': /* Esc [ O R == F3 on |
| * xterm. */ |
| retval = KEY_F(3); |
| break; |
| case 'S': /* Esc [ O S == F4 on |
| * xterm. */ |
| retval = KEY_F(4); |
| break; |
| } |
| } else { |
| /* Esc [ O == F3 on FreeBSD console. */ |
| retval = KEY_F(3); |
| } |
| break; |
| case 'P': /* Esc [ P == F4 on FreeBSD console. */ |
| retval = KEY_F(4); |
| break; |
| case 'Q': /* Esc [ Q == F5 on FreeBSD console. */ |
| retval = KEY_F(5); |
| break; |
| case 'R': /* Esc [ R == F6 on FreeBSD console. */ |
| retval = KEY_F(6); |
| break; |
| case 'S': /* Esc [ S == F7 on FreeBSD console. */ |
| retval = KEY_F(7); |
| break; |
| case 'T': /* Esc [ T == F8 on FreeBSD console. */ |
| retval = KEY_F(8); |
| break; |
| case 'U': /* Esc [ U == PageDown on Hurd console. */ |
| retval = NANO_NEXTPAGE_KEY; |
| break; |
| case 'V': /* Esc [ V == PageUp on Hurd console. */ |
| retval = NANO_PREVPAGE_KEY; |
| break; |
| case 'W': /* Esc [ W == F11 on FreeBSD console. */ |
| retval = KEY_F(11); |
| break; |
| case 'X': /* Esc [ X == F12 on FreeBSD console. */ |
| retval = KEY_F(12); |
| break; |
| case 'Y': /* Esc [ Y == End on Hurd console. */ |
| retval = NANO_END_KEY; |
| break; |
| case 'Z': /* Esc [ Z == F14 on FreeBSD console. */ |
| retval = KEY_F(14); |
| break; |
| case 'a': /* Esc [ a == Shift-Up on rxvt/Eterm. */ |
| case 'b': /* Esc [ b == Shift-Down on rxvt/Eterm. */ |
| case 'c': /* Esc [ c == Shift-Right on rxvt/ |
| * Eterm. */ |
| case 'd': /* Esc [ d == Shift-Left on rxvt/Eterm. */ |
| retval = get_escape_seq_abcd(escape_seq[1]); |
| break; |
| case '[': |
| if (es_len >= 3) { |
| switch (escape_seq[2]) { |
| case 'A': /* Esc [ [ A == F1 on Linux |
| * console. */ |
| retval = KEY_F(1); |
| break; |
| case 'B': /* Esc [ [ B == F2 on Linux |
| * console. */ |
| retval = KEY_F(2); |
| break; |
| case 'C': /* Esc [ [ C == F3 on Linux |
| * console. */ |
| retval = KEY_F(3); |
| break; |
| case 'D': /* Esc [ [ D == F4 on Linux |
| * console. */ |
| retval = KEY_F(4); |
| break; |
| case 'E': /* Esc [ [ E == F5 on Linux |
| * console. */ |
| retval = KEY_F(5); |
| break; |
| } |
| } |
| break; |
| } |
| break; |
| } |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "get_escape_seq_kbinput(): retval = %d, ignore_seq = %d\n", retval, (int)*ignore_seq); |
| #endif |
| |
| return retval; |
| } |
| |
| /* Return the equivalent arrow key value for the case-insensitive |
| * letters A (up), B (down), C (right), and D (left). These are common |
| * to many escape sequences. */ |
| int get_escape_seq_abcd(int kbinput) |
| { |
| switch (tolower(kbinput)) { |
| case 'a': |
| return NANO_PREVLINE_KEY; |
| case 'b': |
| return NANO_NEXTLINE_KEY; |
| case 'c': |
| return NANO_FORWARD_KEY; |
| case 'd': |
| return NANO_BACK_KEY; |
| default: |
| return ERR; |
| } |
| } |
| |
| /* Read in a string of input characters (e.g. an escape sequence) |
| * verbatim. Store the string in v_kbinput and return the length |
| * of the string in v_len. Assume nodelay(win) is FALSE. */ |
| int *get_verbatim_kbinput(WINDOW *win, int *v_kbinput, size_t *v_len, |
| bool allow_ascii) |
| { |
| int kbinput; |
| size_t i = 0, v_newlen = 0; |
| |
| #ifndef NANO_SMALL |
| allow_pending_sigwinch(TRUE); |
| #endif |
| |
| *v_len = 0; |
| v_kbinput = (int *)nmalloc(sizeof(int)); |
| |
| /* Turn off flow control characters if necessary so that we can type |
| * them in verbatim, and turn the keypad off so that we don't get |
| * extended keypad values outside the ASCII range. */ |
| if (ISSET(PRESERVE)) |
| disable_flow_control(); |
| keypad(win, FALSE); |
| |
| /* Read the first character using blocking input, since using |
| * non-blocking input will eat up all unused CPU. Then increment |
| * v_len and save the character in v_kbinput. */ |
| kbinput = wgetch(win); |
| (*v_len)++; |
| v_kbinput[0] = kbinput; |
| #ifdef DEBUG |
| fprintf(stderr, "get_verbatim_kbinput(): kbinput = %d, v_len = %lu\n", kbinput, (unsigned long)*v_len); |
| #endif |
| |
| /* Read any following characters using non-blocking input, until |
| * there aren't any left to be read, and save the complete string of |
| * characters in v_kbinput, incrementing v_len accordingly. We read |
| * them all at once in order to minimize the chance that there might |
| * be a delay greater than nodelay() provides for between them, in |
| * which case we'll stop before all of them are read. */ |
| nodelay(win, TRUE); |
| while ((kbinput = wgetch(win)) != ERR) { |
| (*v_len)++; |
| v_kbinput = (int *)nrealloc(v_kbinput, *v_len * sizeof(int)); |
| v_kbinput[*v_len - 1] = kbinput; |
| #ifdef DEBUG |
| fprintf(stderr, "get_verbatim_kbinput(): kbinput = %d, v_len = %lu\n", kbinput, (unsigned long)*v_len); |
| #endif |
| } |
| nodelay(win, FALSE); |
| |
| /* Pass the string of characters to get_untranslated_kbinput(), one |
| * by one, so it can handle them as ASCII character sequences and/or |
| * escape sequences. Filter out ERR's from v_kbinput in the |
| * process; they shouldn't occur in the string of characters unless |
| * we're reading an incomplete sequence, in which case we only want |
| * to keep the complete sequence. */ |
| for (; i < *v_len; i++) { |
| v_kbinput[v_newlen] = get_untranslated_kbinput(v_kbinput[i], i, |
| allow_ascii |
| #ifndef NANO_SMALL |
| , FALSE |
| #endif |
| ); |
| if (v_kbinput[i] != ERR && v_kbinput[v_newlen] != ERR) |
| v_newlen++; |
| } |
| |
| if (v_newlen == 0) { |
| /* If there were no characters after the ERR's were filtered |
| * out, set v_len and reallocate v_kbinput to account for |
| * one character, and set that character to ERR. */ |
| *v_len = 1; |
| v_kbinput = (int *)nrealloc(v_kbinput, sizeof(int)); |
| v_kbinput[0] = ERR; |
| } else if (v_newlen != *v_len) { |
| /* If there were fewer characters after the ERR's were filtered |
| * out, set v_len and reallocate v_kbinput to account for |
| * the new number of characters. */ |
| *v_len = v_newlen; |
| v_kbinput = (int *)nrealloc(v_kbinput, *v_len * sizeof(int)); |
| } |
| |
| /* If allow_ascii is TRUE and v_kbinput[0] is ERR, we need to |
| * complete an ASCII character sequence. Keep reading in characters |
| * using blocking input until we get a complete sequence. */ |
| if (allow_ascii && v_kbinput[0] == ERR) { |
| while (v_kbinput[0] == ERR) { |
| kbinput = wgetch(win); |
| v_kbinput[0] = get_untranslated_kbinput(kbinput, i, |
| allow_ascii |
| #ifndef NANO_SMALL |
| , FALSE |
| #endif |
| ); |
| i++; |
| } |
| } |
| |
| /* Turn flow control characters back on if necessary and turn the |
| * keypad back on now that we're done. */ |
| if (ISSET(PRESERVE)) |
| enable_flow_control(); |
| keypad(win, TRUE); |
| |
| #ifndef NANO_SMALL |
| allow_pending_sigwinch(FALSE); |
| #endif |
| |
| return v_kbinput; |
| } |
| |
| int get_untranslated_kbinput(int kbinput, size_t position, bool |
| allow_ascii |
| #ifndef NANO_SMALL |
| , bool reset |
| #endif |
| ) |
| { |
| static size_t ascii_digits = 0; |
| int retval; |
| |
| #ifndef NANO_SMALL |
| if (reset) { |
| ascii_digits = 0; |
| return ERR; |
| } |
| #endif |
| |
| if (allow_ascii) { |
| /* position is equal to the number of ASCII digits we've read so |
| * far, and kbinput is a digit from '0' to '9': ASCII character |
| * sequence mode. If the digit sequence's range is limited to |
| * 2XX (the first digit is in the '0' to '2' range and it's the |
| * first digit, or if it's in the full digit range and it's not |
| * the first digit), increment the ASCII digit counter and |
| * interpret the digit. If the digit sequence's range is not |
| * limited to 2XX, fall through. */ |
| if (position == ascii_digits && kbinput >= '0' && kbinput <= '9') { |
| if (kbinput <= '2' || ascii_digits > 0) { |
| ascii_digits++; |
| kbinput = get_ascii_kbinput(kbinput, ascii_digits |
| #ifndef NANO_SMALL |
| , FALSE |
| #endif |
| ); |
| if (kbinput != ERR) |
| /* If we've read in a complete ASCII digit sequence, |
| * reset the ASCII digit counter. */ |
| ascii_digits = 0; |
| } |
| } else if (ascii_digits > 0) |
| /* position is not equal to the number of ASCII digits we've |
| * read or kbinput is a non-digit, and we're in the middle |
| * of an ASCII character sequence. Reset the ASCII digit |
| * counter. */ |
| ascii_digits = 0; |
| } |
| |
| /* Save the corresponding ASCII character as the result if we've |
| * read in a complete ASCII digit sequence, or the passed-in |
| * character if we haven't. */ |
| retval = kbinput; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "get_untranslated_kbinput(): kbinput = %d, position = %lu, ascii_digits = %lu\n", kbinput, (unsigned long)position, (unsigned long)ascii_digits); |
| #endif |
| |
| return retval; |
| } |
| |
| #ifndef DISABLE_MOUSE |
| /* Check for a mouse event, and if one's taken place, save the |
| * coordinates where it took place in mouse_x and mouse_y. After that, |
| * assuming allow_shortcuts is FALSE, if the shortcut list on the |
| * bottom two lines of the screen is visible and the mouse event took |
| * place on it, figure out which shortcut was clicked and put back the |
| * equivalent keystroke(s). Return FALSE if no keystrokes were |
| * put back, or TRUE if at least one was. Assume that KEY_MOUSE has |
| * already been read in. */ |
| bool get_mouseinput(int *mouse_x, int *mouse_y, bool allow_shortcuts) |
| { |
| MEVENT mevent; |
| |
| *mouse_x = -1; |
| *mouse_y = -1; |
| |
| /* First, get the actual mouse event. */ |
| if (getmouse(&mevent) == ERR) |
| return FALSE; |
| |
| /* Save the screen coordinates where the mouse event took place. */ |
| *mouse_x = mevent.x; |
| *mouse_y = mevent.y; |
| |
| /* If we're allowing shortcuts, the current shortcut list is being |
| * displayed on the last two lines of the screen, and the mouse |
| * event took place inside it, we need to figure out which shortcut |
| * was clicked and put back the equivalent keystroke(s) for it. */ |
| if (allow_shortcuts && !ISSET(NO_HELP) && wenclose(bottomwin, |
| *mouse_y, *mouse_x)) { |
| int i, j; |
| size_t currslen; |
| /* The number of shortcuts in the current shortcut list. */ |
| const shortcut *s = currshortcut; |
| /* The actual shortcut we clicked on, starting at the first |
| * one in the current shortcut list. */ |
| |
| /* Get the shortcut lists' length. */ |
| if (currshortcut == main_list) |
| currslen = MAIN_VISIBLE; |
| else { |
| currslen = length_of_list(currshortcut); |
| |
| /* We don't show any more shortcuts than the main list |
| * does. */ |
| if (currslen > MAIN_VISIBLE) |
| currslen = MAIN_VISIBLE; |
| } |
| |
| /* Calculate the width of each shortcut in the list (it's the |
| * same for all of them). */ |
| if (currslen < 2) |
| i = COLS / 6; |
| else |
| i = COLS / ((currslen / 2) + (currslen % 2)); |
| |
| /* Calculate the y-coordinates relative to the beginning of |
| * bottomwin, i.e, the bottom three lines of the screen. */ |
| j = *mouse_y - (editwinrows + 3); |
| |
| /* If we're on the statusbar, beyond the end of the shortcut |
| * list, or beyond the end of a shortcut on the right side of |
| * the screen, don't do anything. */ |
| if (j < 0 || (*mouse_x / i) >= currslen) |
| return FALSE; |
| j = (*mouse_x / i) * 2 + j; |
| if (j >= currslen) |
| return FALSE; |
| |
| /* Go through the shortcut list to determine which shortcut was |
| * clicked. */ |
| for (; j > 0; j--) |
| s = s->next; |
| |
| /* And put back the equivalent key. Assume that the shortcut |
| * has an equivalent control key, meta key sequence, or both. */ |
| if (s->ctrlval != NANO_NO_KEY) |
| unget_kbinput(s->ctrlval, FALSE); |
| else if (s->metaval != NANO_NO_KEY) |
| unget_kbinput(s->metaval, TRUE); |
| |
| return TRUE; |
| } |
| return FALSE; |
| } |
| #endif /* !DISABLE_MOUSE */ |
| |
| const shortcut *get_shortcut(const shortcut *s_list, int kbinput, bool |
| *meta_key) |
| { |
| const shortcut *s = s_list; |
| size_t slen = length_of_list(s_list); |
| |
| /* Check for shortcuts. */ |
| for (; slen > 0; slen--) { |
| /* We've found a shortcut if: |
| * |
| * 1. The key exists. |
| * 2. The key is a control key in the shortcut list. |
| * 3. The key is a function key in the shortcut list. |
| * 4. meta_key is TRUE and the key is a meta sequence. |
| * 5. meta_key is TRUE and the key is the other meta sequence in |
| * the shortcut list. */ |
| if (kbinput != NANO_NO_KEY && ((*meta_key == FALSE && |
| ((kbinput == s->ctrlval || kbinput == s->funcval))) || |
| (*meta_key == TRUE && (kbinput == s->metaval || |
| kbinput == s->miscval)))) { |
| break; |
| } |
| |
| s = s->next; |
| } |
| |
| /* Translate the shortcut to either its control key or its meta key |
| * equivalent. Assume that the shortcut has an equivalent control |
| * key, meta key, or both. */ |
| if (slen > 0) { |
| if (s->ctrlval != NANO_NO_KEY) { |
| *meta_key = FALSE; |
| kbinput = s->ctrlval; |
| } else if (s->metaval != NANO_NO_KEY) { |
| *meta_key = TRUE; |
| kbinput = s->metaval; |
| } |
| return s; |
| } |
| |
| return NULL; |
| } |
| |
| #ifndef NANO_SMALL |
| const toggle *get_toggle(int kbinput, bool meta_key) |
| { |
| const toggle *t = toggles; |
| |
| /* Check for toggles. */ |
| for (; t != NULL; t = t->next) { |
| /* We've found a toggle if meta_key is TRUE and the key is in |
| * the meta toggle list. */ |
| if (meta_key && kbinput == t->val) |
| break; |
| } |
| |
| return t; |
| } |
| #endif /* !NANO_SMALL */ |
| |
| int get_edit_input(bool *meta_key, bool allow_funcs) |
| { |
| bool keyhandled = FALSE; |
| int kbinput, retval; |
| const shortcut *s; |
| #ifndef NANO_SMALL |
| const toggle *t; |
| #endif |
| |
| kbinput = get_kbinput(edit, meta_key); |
| |
| /* Universal shortcuts. These aren't in any shortcut lists, but we |
| * should handle them anyway. */ |
| switch (kbinput) { |
| case NANO_XON_KEY: |
| statusbar(_("XON ignored, mumble mumble.")); |
| return ERR; |
| case NANO_XOFF_KEY: |
| statusbar(_("XOFF ignored, mumble mumble.")); |
| return ERR; |
| #ifndef NANO_SMALL |
| case NANO_SUSPEND_KEY: |
| if (ISSET(SUSPEND)) |
| do_suspend(0); |
| return ERR; |
| #endif |
| #ifndef DISABLE_MOUSE |
| case KEY_MOUSE: |
| if (get_edit_mouse()) { |
| kbinput = get_kbinput(edit, meta_key); |
| break; |
| } else |
| return ERR; |
| #endif |
| } |
| |
| /* Check for a shortcut in the main list. */ |
| s = get_shortcut(main_list, kbinput, meta_key); |
| |
| if (s != NULL) { |
| /* We got a shortcut. Run the shortcut's corresponding function |
| * if it has one. */ |
| if (s->func != do_cut_text) |
| cutbuffer_reset(); |
| if (s->func != NULL) { |
| if (allow_funcs) |
| s->func(); |
| keyhandled = TRUE; |
| } |
| } |
| |
| #ifndef NANO_SMALL |
| else { |
| /* If we didn't get a shortcut, check for a toggle. */ |
| t = get_toggle(kbinput, *meta_key); |
| |
| /* We got a toggle. Switch the value of the toggle's |
| * corresponding flag. */ |
| if (t != NULL) { |
| cutbuffer_reset(); |
| if (allow_funcs) |
| do_toggle(t); |
| keyhandled = TRUE; |
| } |
| } |
| #endif |
| |
| /* If we got a shortcut with a corresponding function or a toggle, |
| * reset meta_key and retval. If we didn't, keep the value of |
| * meta_key and return the key we got in retval. */ |
| if (allow_funcs && keyhandled) { |
| *meta_key = FALSE; |
| retval = ERR; |
| } else { |
| cutbuffer_reset(); |
| retval = kbinput; |
| } |
| |
| return retval; |
| } |
| |
| #ifndef DISABLE_MOUSE |
| bool get_edit_mouse(void) |
| { |
| int mouse_x, mouse_y; |
| bool retval; |
| |
| retval = get_mouseinput(&mouse_x, &mouse_y, TRUE); |
| |
| if (!retval) { |
| /* We can click in the edit window to move the cursor. */ |
| if (wenclose(edit, mouse_y, mouse_x)) { |
| bool sameline; |
| /* Did they click on the line with the cursor? If they |
| * clicked on the cursor, we set the mark. */ |
| size_t xcur; |
| /* The character they clicked on. */ |
| |
| /* Subtract out the size of topwin. Perhaps we need a |
| * constant somewhere? */ |
| mouse_y -= 2; |
| |
| sameline = (mouse_y == current_y); |
| |
| /* Move to where the click occurred. */ |
| for (; current_y < mouse_y && current->next != NULL; current_y++) |
| current = current->next; |
| for (; current_y > mouse_y && current->prev != NULL; current_y--) |
| current = current->prev; |
| |
| xcur = actual_x(current->data, get_page_start(xplustabs()) + |
| mouse_x); |
| |
| #ifndef NANO_SMALL |
| /* Clicking where the cursor is toggles the mark, as does |
| * clicking beyond the line length with the cursor at the |
| * end of the line. */ |
| if (sameline && xcur == current_x) { |
| if (ISSET(VIEW_MODE)) { |
| print_view_warning(); |
| return retval; |
| } |
| do_mark(); |
| } |
| #endif |
| |
| current_x = xcur; |
| placewewant = xplustabs(); |
| edit_refresh(); |
| } |
| } |
| /* FIXME: If we clicked on a location in the statusbar, the cursor |
| * should move to the location we clicked on. This functionality |
| * should be in get_statusbar_mouse() when it's written. */ |
| |
| return retval; |
| } |
| #endif /* !DISABLE_MOUSE */ |
| |
| /* Return the placewewant associated with current_x. That is, xplustabs |
| * is the zero-based column position of the cursor. Value is no smaller |
| * than current_x. */ |
| size_t xplustabs(void) |
| { |
| return strnlenpt(current->data, current_x); |
| } |
| |
| /* actual_x() gives the index in str of the character displayed at |
| * column xplus. That is, actual_x() is the largest value such that |
| * strnlenpt(str, actual_x(str, xplus)) <= xplus. */ |
| size_t actual_x(const char *str, size_t xplus) |
| { |
| size_t i = 0; |
| /* the position in str, returned */ |
| size_t length = 0; |
| /* the screen display width to str[i] */ |
| |
| assert(str != NULL); |
| |
| for (; length < xplus && *str != '\0'; i++, str++) { |
| if (*str == '\t') |
| length += tabsize - (length % tabsize); |
| else if (is_cntrl_char((int)*str)) |
| length += 2; |
| else |
| length++; |
| } |
| assert(length == strnlenpt(str - i, i)); |
| assert(i <= strlen(str - i)); |
| |
| if (length > xplus) |
| i--; |
| |
| return i; |
| } |
| |
| /* A strlen() with tabs factored in, similar to xplustabs(). How many |
| * columns wide are the first size characters of buf? */ |
| size_t strnlenpt(const char *buf, size_t size) |
| { |
| size_t length = 0; |
| |
| assert(buf != NULL); |
| for (; *buf != '\0' && size != 0; size--, buf++) { |
| if (*buf == '\t') |
| length += tabsize - (length % tabsize); |
| else if (is_cntrl_char((int)*buf)) |
| length += 2; |
| else |
| length++; |
| } |
| return length; |
| } |
| |
| /* How many columns wide is buf? */ |
| size_t strlenpt(const char *buf) |
| { |
| return strnlenpt(buf, (size_t)-1); |
| } |
| |
| void blank_titlebar(void) |
| { |
| mvwaddstr(topwin, 0, 0, hblank); |
| } |
| |
| void blank_edit(void) |
| { |
| int i; |
| for (i = 0; i < editwinrows; i++) |
| mvwaddstr(edit, i, 0, hblank); |
| } |
| |
| void blank_statusbar(void) |
| { |
| mvwaddstr(bottomwin, 0, 0, hblank); |
| } |
| |
| void check_statblank(void) |
| { |
| if (statblank > 1) |
| statblank--; |
| else if (statblank == 1 && !ISSET(CONSTUPDATE)) { |
| statblank = 0; |
| blank_statusbar(); |
| wnoutrefresh(bottomwin); |
| reset_cursor(); |
| wrefresh(edit); |
| } |
| } |
| |
| void blank_bottombars(void) |
| { |
| if (!ISSET(NO_HELP)) { |
| mvwaddstr(bottomwin, 1, 0, hblank); |
| mvwaddstr(bottomwin, 2, 0, hblank); |
| } |
| } |
| |
| /* Convert buf into a string that can be displayed on screen. The |
| * caller wants to display buf starting with column start_col, and |
| * extending for at most len columns. start_col is zero-based. len is |
| * one-based, so len == 0 means you get "" returned. The returned |
| * string is dynamically allocated, and should be freed. */ |
| char *display_string(const char *buf, size_t start_col, size_t len) |
| { |
| size_t start_index; |
| /* Index in buf of first character shown in return value. */ |
| size_t column; |
| /* Screen column start_index corresponds to. */ |
| size_t end_index; |
| /* Index in buf of last character shown in return value. */ |
| size_t alloc_len; |
| /* The length of memory allocated for converted. */ |
| char *converted; |
| /* The string we return. */ |
| size_t index; |
| /* Current position in converted. */ |
| |
| if (len == 0) |
| return mallocstrcpy(NULL, ""); |
| |
| start_index = actual_x(buf, start_col); |
| column = strnlenpt(buf, start_index); |
| assert(column <= start_col); |
| end_index = actual_x(buf, start_col + len - 1); |
| alloc_len = strnlenpt(buf, end_index + 1) - column; |
| if (len > alloc_len + column - start_col) |
| len = alloc_len + column - start_col; |
| converted = charalloc(alloc_len + 1); |
| buf += start_index; |
| index = 0; |
| |
| for (; index < alloc_len; buf++) { |
| if (*buf == '\t') { |
| converted[index++] = |
| #if !defined(NANO_SMALL) && defined(ENABLE_NANORC) |
| ISSET(WHITESPACE_DISPLAY) ? whitespace[0] : |
| #endif |
| ' '; |
| while ((column + index) % tabsize) |
| converted[index++] = ' '; |
| } else if (is_cntrl_char(*buf)) { |
| converted[index++] = '^'; |
| if (*buf == '\n') |
| /* Treat newlines embedded in a line as encoded nulls; |
| * the line in question should be run through unsunder() |
| * before reaching here. */ |
| converted[index++] = '@'; |
| else if (*buf == NANO_CONTROL_8) |
| converted[index++] = '?'; |
| else |
| converted[index++] = *buf + 64; |
| } else if (*buf == ' ') |
| converted[index++] = |
| #if !defined(NANO_SMALL) && defined(ENABLE_NANORC) |
| ISSET(WHITESPACE_DISPLAY) ? whitespace[1] : |
| #endif |
| ' '; |
| else |
| converted[index++] = *buf; |
| } |
| assert(len <= alloc_len + column - start_col); |
| charmove(converted, converted + start_col - column, len); |
| null_at(&converted, len); |
| |
| return charealloc(converted, len + 1); |
| } |
| |
| /* Repaint the statusbar when getting a character in nanogetstr(). buf |
| * should be no longer than max(0, COLS - 4). |
| * |
| * Note that we must turn on A_REVERSE here, since do_help() turns it |
| * off! */ |
| void nanoget_repaint(const char *buf, const char *inputbuf, size_t x) |
| { |
| size_t x_real = strnlenpt(inputbuf, x); |
| int wid = COLS - strlen(buf) - 2; |
| |
| assert(0 <= x && x <= strlen(inputbuf)); |
| |
| wattron(bottomwin, A_REVERSE); |
| blank_statusbar(); |
| |
| mvwaddstr(bottomwin, 0, 0, buf); |
| waddch(bottomwin, ':'); |
| |
| if (COLS > 1) |
| waddch(bottomwin, x_real < wid ? ' ' : '$'); |
| if (COLS > 2) { |
| size_t page_start = x_real - x_real % wid; |
| char *expanded = display_string(inputbuf, page_start, wid); |
| |
| assert(wid > 0); |
| assert(strlen(expanded) <= wid); |
| waddstr(bottomwin, expanded); |
| free(expanded); |
| wmove(bottomwin, 0, COLS - wid + x_real - page_start); |
| } else |
| wmove(bottomwin, 0, COLS - 1); |
| wattroff(bottomwin, A_REVERSE); |
| } |
| |
| /* Get the input from the keyboard; this should only be called from |
| * statusq(). */ |
| int nanogetstr(int allowtabs, const char *buf, const char *def, |
| #ifndef NANO_SMALL |
| historyheadtype *history_list, |
| #endif |
| const shortcut *s |
| #ifndef DISABLE_TABCOMP |
| , bool *list |
| #endif |
| ) |
| { |
| int kbinput; |
| bool meta_key; |
| static int x = -1; |
| /* the cursor position in 'answer' */ |
| int xend; |
| /* length of 'answer', the status bar text */ |
| bool tabbed = FALSE; |
| /* used by input_tab() */ |
| const shortcut *t; |
| |
| #ifndef NANO_SMALL |
| /* for history */ |
| char *history = NULL; |
| char *currentbuf = NULL; |
| char *complete = NULL; |
| int last_kbinput = 0; |
| |
| /* This variable is used in the search history code. use_cb == 0 |
| means that we're using the existing history and ignoring |
| currentbuf. use_cb == 1 means that the entry in answer should be |
| moved to currentbuf or restored from currentbuf to answer. |
| use_cb == 2 means that the entry in currentbuf should be moved to |
| answer or restored from answer to currentbuf. */ |
| int use_cb = 0; |
| #endif |
| xend = strlen(def); |
| |
| /* Only put x at the end of the string if it's uninitialized or if |
| it would be past the end of the string as it is. Otherwise, |
| leave it alone. This is so the cursor position stays at the same |
| place if a prompt-changing toggle is pressed. */ |
| if (x == -1 || x > xend || resetstatuspos) |
| x = xend; |
| |
| answer = charealloc(answer, xend + 1); |
| if (xend > 0) |
| strcpy(answer, def); |
| else |
| answer[0] = '\0'; |
| |
| #if !defined(DISABLE_HELP) || !defined(DISABLE_MOUSE) |
| currshortcut = s; |
| #endif |
| |
| /* Get the input! */ |
| |
| nanoget_repaint(buf, answer, x); |
| |
| /* Make sure any editor screen updates are displayed before getting |
| input */ |
| wnoutrefresh(edit); |
| wrefresh(bottomwin); |
| |
| /* If we're using restricted mode, we aren't allowed to change the |
| * name of a file once it has one because that would allow writing |
| * to files not specified on the command line. In this case, |
| * disable all keys that would change the text if the filename isn't |
| * blank and we're at the "Write File" prompt. */ |
| while ((kbinput = get_kbinput(bottomwin, &meta_key)) != NANO_ENTER_KEY) { |
| for (t = s; t != NULL; t = t->next) { |
| #ifdef DEBUG |
| fprintf(stderr, "Aha! \'%c\' (%d)\n", kbinput, kbinput); |
| #endif |
| |
| /* Temporary hack to interpret NANO_HELP_FKEY correctly. */ |
| if (kbinput == t->funcval) |
| kbinput = t->ctrlval; |
| |
| if (kbinput == t->ctrlval && is_cntrl_char(kbinput)) { |
| |
| #ifndef DISABLE_HELP |
| /* Have to do this here, it would be too late to do it |
| in statusq() */ |
| if (kbinput == NANO_HELP_KEY) { |
| do_help(); |
| break; |
| } |
| #endif |
| #ifndef NANO_SMALL |
| /* Have to handle these here too, for the time being */ |
| if (kbinput == NANO_PREVLINE_KEY || kbinput == NANO_NEXTLINE_KEY) |
| break; |
| #endif |
| |
| return t->ctrlval; |
| } |
| } |
| assert(0 <= x && x <= xend && xend == strlen(answer)); |
| |
| if (kbinput != '\t') |
| tabbed = FALSE; |
| |
| switch (kbinput) { |
| #ifndef DISABLE_MOUSE |
| case KEY_MOUSE: |
| { |
| int mouse_x, mouse_y; |
| get_mouseinput(&mouse_x, &mouse_y, TRUE); |
| } |
| break; |
| #endif |
| case NANO_HOME_KEY: |
| #ifndef NANO_SMALL |
| if (ISSET(SMART_HOME)) { |
| int old_x = x; |
| |
| for (x = 0; isblank(answer[x]) && x < xend; x++) |
| ; |
| |
| if (x == old_x || x == xend) |
| x = 0; |
| } else |
| #endif |
| x = 0; |
| break; |
| case NANO_END_KEY: |
| x = xend; |
| break; |
| case NANO_FORWARD_KEY: |
| if (x < xend) |
| x++; |
| break; |
| case NANO_DELETE_KEY: |
| /* If we're using restricted mode, the filename isn't blank, |
| * and we're at the "Write File" prompt, disable Delete. */ |
| if (!ISSET(RESTRICTED) || filename[0] == '\0' || s != writefile_list) { |
| if (x < xend) { |
| charmove(answer + x, answer + x + 1, xend - x); |
| xend--; |
| } |
| } |
| break; |
| case NANO_CUT_KEY: |
| /* If we're using restricted mode, the filename isn't blank, |
| * and we're at the "Write File" prompt, disable Cut. */ |
| if (!ISSET(RESTRICTED) || filename[0] == '\0' || s != writefile_list) { |
| null_at(&answer, 0); |
| xend = 0; |
| x = 0; |
| } |
| break; |
| case NANO_BACKSPACE_KEY: |
| /* If we're using restricted mode, the filename isn't blank, |
| * and we're at the "Write File" prompt, disable |
| * Backspace. */ |
| if (!ISSET(RESTRICTED) || filename[0] == '\0' || s != writefile_list) { |
| if (x > 0) { |
| charmove(answer + x - 1, answer + x, xend - x + 1); |
| x--; |
| xend--; |
| } |
| } |
| break; |
| case NANO_TAB_KEY: |
| #ifndef NANO_SMALL |
| /* tab history completion */ |
| if (history_list != NULL) { |
| if (!complete || last_kbinput != NANO_TAB_KEY) { |
| history_list->current = (historytype *)history_list; |
| history_list->len = strlen(answer); |
| } |
| |
| if (history_list->len > 0) { |
| complete = get_history_completion(history_list, answer); |
| xend = strlen(complete); |
| x = xend; |
| answer = mallocstrcpy(answer, complete); |
| } |
| } |
| #ifndef DISABLE_TABCOMP |
| else |
| #endif |
| #endif |
| #ifndef DISABLE_TABCOMP |
| if (allowtabs) { |
| int shift = 0; |
| |
| answer = input_tab(answer, x, &tabbed, &shift, list); |
| xend = strlen(answer); |
| x += shift; |
| if (x > xend) |
| x = xend; |
| } |
| #endif |
| break; |
| case NANO_BACK_KEY: |
| if (x > 0) |
| x--; |
| break; |
| case NANO_PREVLINE_KEY: |
| #ifndef NANO_SMALL |
| if (history_list != NULL) { |
| |
| /* if currentbuf is NULL, or if use_cb is 1, currentbuf |
| isn't NULL, and currentbuf is different from answer, |
| it means that we're scrolling up at the top of the |
| search history, and we need to save the current |
| answer in currentbuf; do this and reset use_cb to |
| 0 */ |
| if (currentbuf == NULL || (use_cb == 1 && |
| strcmp(currentbuf, answer) != 0)) { |
| currentbuf = mallocstrcpy(currentbuf, answer); |
| use_cb = 0; |
| } |
| |
| /* if currentbuf isn't NULL, use_cb is 2, and currentbuf |
| is different from answer, it means that we're |
| scrolling up at the bottom of the search history, and |
| we need to make the string in currentbuf the current |
| answer; do this, blow away currentbuf since we don't |
| need it anymore, and reset use_cb to 0 */ |
| if (currentbuf != NULL && use_cb == 2 && |
| strcmp(currentbuf, answer) != 0) { |
| answer = mallocstrcpy(answer, currentbuf); |
| free(currentbuf); |
| currentbuf = NULL; |
| xend = strlen(answer); |
| use_cb = 0; |
| |
| /* else get older search from the history list and save |
| it in answer; if there is no older search, blank out |
| answer */ |
| } else if ((history = get_history_older(history_list)) != NULL) { |
| answer = mallocstrcpy(answer, history); |
| xend = strlen(history); |
| } else { |
| answer = mallocstrcpy(answer, ""); |
| xend = 0; |
| } |
| x = xend; |
| } |
| #endif |
| break; |
| case NANO_NEXTLINE_KEY: |
| #ifndef NANO_SMALL |
| if (history_list != NULL) { |
| |
| /* get newer search from the history list and save it |
| in answer */ |
| if ((history = get_history_newer(history_list)) != NULL) { |
| answer = mallocstrcpy(answer, history); |
| xend = strlen(history); |
| |
| /* if there is no newer search, we're here */ |
| |
| /* if currentbuf isn't NULL and use_cb isn't 2, it means |
| that we're scrolling down at the bottom of the search |
| history and we need to make the string in currentbuf |
| the current answer; do this, blow away currentbuf |
| since we don't need it anymore, and set use_cb to |
| 1 */ |
| } else if (currentbuf != NULL && use_cb != 2) { |
| answer = mallocstrcpy(answer, currentbuf); |
| free(currentbuf); |
| currentbuf = NULL; |
| xend = strlen(answer); |
| use_cb = 1; |
| |
| /* otherwise, if currentbuf is NULL and use_cb isn't 2, |
| it means that we're scrolling down at the bottom of |
| the search history and the current answer (if it's |
| not blank) needs to be saved in currentbuf; do this, |
| blank out answer (if necessary), and set use_cb to |
| 2 */ |
| } else if (use_cb != 2) { |
| if (answer[0] != '\0') { |
| currentbuf = mallocstrcpy(currentbuf, answer); |
| answer = mallocstrcpy(answer, ""); |
| } |
| xend = 0; |
| use_cb = 2; |
| } |
| x = xend; |
| } |
| #endif |
| break; |
| default: |
| |
| for (t = s; t != NULL; t = t->next) { |
| #ifdef DEBUG |
| fprintf(stderr, "Aha! \'%c\' (%d)\n", kbinput, |
| kbinput); |
| #endif |
| if (meta_key && (kbinput == t->metaval || kbinput == t->miscval)) |
| /* We hit a meta key. Do like above. We don't |
| * just put back the letter and let it get |
| * caught above cause that screws the |
| * keypad... */ |
| return kbinput; |
| } |
| |
| /* If we're using restricted mode, the filename isn't blank, |
| * and we're at the "Write File" prompt, act as though the |
| * unhandled character we got is a control character and |
| * throw it away. */ |
| if (is_cntrl_char(kbinput) || (ISSET(RESTRICTED) && filename[0] != '\0' && s == writefile_list)) |
| break; |
| answer = charealloc(answer, xend + 2); |
| charmove(answer + x + 1, answer + x, xend - x + 1); |
| xend++; |
| answer[x] = kbinput; |
| x++; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "input \'%c\' (%d)\n", kbinput, kbinput); |
| #endif |
| } /* switch (kbinput) */ |
| #ifndef NANO_SMALL |
| last_kbinput = kbinput; |
| #endif |
| nanoget_repaint(buf, answer, x); |
| wrefresh(bottomwin); |
| } /* while (kbinput ...) */ |
| |
| /* We finished putting in an answer; reset x */ |
| x = -1; |
| |
| /* Just check for a blank answer here */ |
| if (answer[0] == '\0') |
| return -2; |
| else |
| return 0; |
| } |
| |
| void titlebar(const char *path) |
| { |
| size_t space; |
| /* The space we have available for display. */ |
| size_t verlen = strlen(VERMSG) + 1; |
| /* The length of the version message. */ |
| const char *prefix; |
| /* "File:", "Dir:", or "New Buffer". Goes before filename. */ |
| size_t prefixlen; |
| /* strlen(prefix) + 1. */ |
| const char *state; |
| /* "Modified", "View", or spaces the length of "Modified". |
| * Tells the state of this buffer. */ |
| size_t statelen = 0; |
| /* strlen(state) + 1. */ |
| char *exppath = NULL; |
| /* The file name, expanded for display. */ |
| size_t explen = 0; |
| /* strlen(exppath) + 1. */ |
| int newbuffer = FALSE; |
| /* Do we say "New Buffer"? */ |
| int dots = FALSE; |
| /* Do we put an ellipsis before the path? */ |
| |
| assert(path != NULL || filename != NULL); |
| assert(COLS >= 0); |
| |
| wattron(topwin, A_REVERSE); |
| |
| blank_titlebar(); |
| |
| if (COLS <= 5 || COLS - 5 < verlen) |
| space = 0; |
| else { |
| space = COLS - 5 - verlen; |
| /* Reserve 2/3 of the screen plus one column for after the |
| * version message. */ |
| if (space < COLS - (COLS / 3) + 1) |
| space = COLS - (COLS / 3) + 1; |
| } |
| |
| if (COLS > 4) { |
| /* The version message should only take up 1/3 of the screen |
| * minus one column. */ |
| mvwaddnstr(topwin, 0, 2, VERMSG, (COLS / 3) - 3); |
| waddstr(topwin, " "); |
| } |
| |
| if (ISSET(MODIFIED)) |
| state = _("Modified"); |
| else if (path == NULL && ISSET(VIEW_MODE)) |
| state = _("View"); |
| else { |
| if (space > 0) |
| statelen = strnlen(_("Modified"), space - 1) + 1; |
| state = &hblank[COLS - statelen]; |
| } |
| statelen = strnlen(state, COLS); |
| /* We need a space before state. */ |
| if ((ISSET(MODIFIED) || ISSET(VIEW_MODE)) && statelen < COLS) |
| statelen++; |
| |
| assert(space >= 0); |
| if (space == 0 || statelen >= space) |
| goto the_end; |
| |
| #ifndef DISABLE_BROWSER |
| if (path != NULL) |
| prefix = _("DIR:"); |
| else |
| #endif |
| if (filename[0] == '\0') { |
| prefix = _("New Buffer"); |
| newbuffer = TRUE; |
| } else |
| prefix = _("File:"); |
| assert(statelen < space); |
| prefixlen = strnlen(prefix, space - statelen); |
| /* If newbuffer is FALSE, we need a space after prefix. */ |
| if (!newbuffer && prefixlen + statelen < space) |
| prefixlen++; |
| |
| if (path == NULL) |
| path = filename; |
| space -= prefixlen + statelen; |
| /* space is now the room we have for the file name. */ |
| if (!newbuffer) { |
| size_t lenpt = strlenpt(path), start_col; |
| |
| if (lenpt > space) |
| start_col = actual_x(path, lenpt - space); |
| else |
| start_col = 0; |
| exppath = display_string(path, start_col, space); |
| dots = (lenpt > space); |
| explen = strlen(exppath); |
| } |
| |
| if (!dots) { |
| /* There is room for the whole filename, so we center it. */ |
| waddnstr(topwin, hblank, (space - explen) / 3); |
| waddnstr(topwin, prefix, prefixlen); |
| if (!newbuffer) { |
| assert(strlen(prefix) + 1 == prefixlen); |
| waddch(topwin, ' '); |
| waddstr(topwin, exppath); |
| } |
| } else { |
| /* We will say something like "File: ...ename". */ |
| waddnstr(topwin, prefix, prefixlen); |
| if (space <= 0 || newbuffer) |
| goto the_end; |
| waddch(topwin, ' '); |
| waddnstr(topwin, "...", space); |
| if (space <= 3) |
| goto the_end; |
| space -= 3; |
| assert(explen = space + 3); |
| waddnstr(topwin, exppath + 3, space); |
| } |
| |
| the_end: |
| |
| free(exppath); |
| |
| if (COLS <= 1 || statelen >= COLS - 1) |
| mvwaddnstr(topwin, 0, 0, state, COLS); |
| else { |
| assert(COLS - statelen - 2 >= 0); |
| mvwaddch(topwin, 0, COLS - statelen - 2, ' '); |
| mvwaddnstr(topwin, 0, COLS - statelen - 1, state, statelen); |
| } |
| |
| wattroff(topwin, A_REVERSE); |
| |
| wnoutrefresh(topwin); |
| reset_cursor(); |
| wrefresh(edit); |
| } |
| |
| /* If modified is not already set, set it and update titlebar. */ |
| void set_modified(void) |
| { |
| if (!ISSET(MODIFIED)) { |
| SET(MODIFIED); |
| titlebar(NULL); |
| } |
| } |
| |
| void statusbar(const char *msg, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, msg); |
| |
| /* Curses mode is turned off. If we use wmove() now, it will muck |
| * up the terminal settings. So we just use vfprintf(). */ |
| if (curses_ended) { |
| vfprintf(stderr, msg, ap); |
| va_end(ap); |
| return; |
| } |
| |
| /* Blank out the line. */ |
| blank_statusbar(); |
| |
| if (COLS >= 4) { |
| char *bar; |
| char *foo; |
| size_t start_x = 0, foo_len; |
| #if !defined(NANO_SMALL) && defined(ENABLE_NANORC) |
| int old_whitespace = ISSET(WHITESPACE_DISPLAY); |
| UNSET(WHITESPACE_DISPLAY); |
| #endif |
| bar = charalloc(COLS - 3); |
| vsnprintf(bar, COLS - 3, msg, ap); |
| va_end(ap); |
| foo = display_string(bar, 0, COLS - 4); |
| #if !defined(NANO_SMALL) && defined(ENABLE_NANORC) |
| if (old_whitespace) |
| SET(WHITESPACE_DISPLAY); |
| #endif |
| free(bar); |
| foo_len = strlen(foo); |
| start_x = (COLS - foo_len - 4) / 2; |
| |
| wmove(bottomwin, 0, start_x); |
| wattron(bottomwin, A_REVERSE); |
| |
| waddstr(bottomwin, "[ "); |
| waddstr(bottomwin, foo); |
| free(foo); |
| waddstr(bottomwin, " ]"); |
| wattroff(bottomwin, A_REVERSE); |
| wnoutrefresh(bottomwin); |
| reset_cursor(); |
| wrefresh(edit); |
| /* Leave the cursor at its position in the edit window, not |
| * in the statusbar. */ |
| } |
| |
| SET(DISABLE_CURPOS); |
| statblank = 26; |
| } |
| |
| void bottombars(const shortcut *s) |
| { |
| size_t i, colwidth, slen; |
| char *keystr; |
| |
| if (ISSET(NO_HELP)) |
| return; |
| |
| if (s == main_list) { |
| slen = MAIN_VISIBLE; |
| assert(slen <= length_of_list(s)); |
| } else { |
| slen = length_of_list(s); |
| |
| /* Don't show any more shortcuts than the main list does. */ |
| if (slen > MAIN_VISIBLE) |
| slen = MAIN_VISIBLE; |
| } |
| |
| /* There will be this many characters per column. We need at least |
| * 3 to display anything properly.*/ |
| colwidth = COLS / ((slen / 2) + (slen % 2)); |
| keystr = charalloc(colwidth); |
| |
| blank_bottombars(); |
| |
| for (i = 0; i < slen; i++, s = s->next) { |
| wmove(bottomwin, 1 + i % 2, (i / 2) * colwidth); |
| |
| /* Yucky sentinel values we can't handle a better way. */ |
| #ifndef NANO_SMALL |
| if (s->ctrlval == NANO_HISTORY_KEY) |
| strncpy(keystr, _("Up"), colwidth); |
| else |
| #endif |
| if (s->ctrlval == NANO_CONTROL_SPACE) |
| strncpy(keystr, "^ ", colwidth); |
| else if (s->ctrlval == NANO_CONTROL_8) |
| strncpy(keystr, "^?", colwidth); |
| /* Normal values. Assume that the shortcut has an equivalent |
| * control key, meta key sequence, or both. */ |
| else if (s->ctrlval != NANO_NO_KEY) |
| snprintf(keystr, colwidth, "^%c", s->ctrlval + 64); |
| else if (s->metaval != NANO_NO_KEY) |
| snprintf(keystr, colwidth, "M-%c", toupper(s->metaval)); |
| |
| onekey(keystr, s->desc, colwidth); |
| } |
| |
| free(keystr); |
| |
| wnoutrefresh(bottomwin); |
| reset_cursor(); |
| wrefresh(edit); |
| } |
| |
| /* Write a shortcut key to the help area at the bottom of the window. |
| * keystroke is e.g. "^G" and desc is e.g. "Get Help". We are careful |
| * to write at most len characters, even if len is very small and |
| * keystroke and desc are long. Note that waddnstr(,,(size_t)-1) adds |
| * the whole string! We do not bother padding the entry with blanks. */ |
| void onekey(const char *keystroke, const char *desc, size_t len) |
| { |
| assert(keystroke != NULL && desc != NULL && len >= 0); |
| wattron(bottomwin, A_REVERSE); |
| waddnstr(bottomwin, keystroke, len); |
| wattroff(bottomwin, A_REVERSE); |
| len -= strlen(keystroke) + 1; |
| if (len > 0) { |
| waddch(bottomwin, ' '); |
| waddnstr(bottomwin, desc, len); |
| } |
| } |
| |
| /* And so start the display update routines. */ |
| |
| #ifndef NDEBUG |
| int check_linenumbers(const filestruct *fileptr) |
| { |
| int check_line = 0; |
| const filestruct *filetmp; |
| |
| for (filetmp = edittop; filetmp != fileptr; filetmp = filetmp->next) |
| check_line++; |
| return check_line; |
| } |
| #endif |
| |
| /* nano scrolls horizontally within a line in chunks. This function |
| * returns the column number of the first character displayed in the |
| * window when the cursor is at the given column. Note that |
| * 0 <= column - get_page_start(column) < COLS. */ |
| size_t get_page_start(size_t column) |
| { |
| assert(COLS > 0); |
| if (column == 0 || column < COLS - 1) |
| return 0; |
| else if (COLS > 9) |
| return column - 7 - (column - 7) % (COLS - 8); |
| else if (COLS > 2) |
| return column - (COLS - 2); |
| else |
| return column - (COLS - 1); |
| /* The parentheses are necessary to avoid overflow. */ |
| } |
| |
| /* Resets current_y, based on the position of current, and puts the |
| * cursor at (current_y, current_x). */ |
| void reset_cursor(void) |
| { |
| /* Yuck. This condition can be true after open_file() when opening |
| * the first file. */ |
| if (edittop == NULL) |
| return; |
| |
| current_y = current->lineno - edittop->lineno; |
| if (current_y < editwinrows) { |
| size_t x = xplustabs(); |
| wmove(edit, current_y, x - get_page_start(x)); |
| } |
| } |
| |
| /* edit_add() takes care of the job of actually painting a line into the |
| * edit window. fileptr is the line to be painted, at row yval of the |
| * window. converted is the actual string to be written to the window, |
| * with tabs and control characters replaced by strings of regular |
| * characters. start is the column number of the first character of |
| * this page. That is, the first character of converted corresponds to |
| * character number actual_x(fileptr->data, start) of the line. */ |
| void edit_add(const filestruct *fileptr, const char *converted, int |
| yval, size_t start) |
| { |
| #if defined(ENABLE_COLOR) || !defined(NANO_SMALL) |
| size_t startpos = actual_x(fileptr->data, start); |
| /* The position in fileptr->data of the leftmost character |
| * that displays at least partially on the window. */ |
| size_t endpos = actual_x(fileptr->data, start + COLS - 1) + 1; |
| /* The position in fileptr->data of the first character that is |
| * completely off the window to the right. |
| * |
| * Note that endpos might be beyond the null terminator of the |
| * string. */ |
| #endif |
| |
| assert(fileptr != NULL && converted != NULL); |
| assert(strlen(converted) <= COLS); |
| |
| /* Just paint the string in any case (we'll add color or reverse on |
| * just the text that needs it). */ |
| mvwaddstr(edit, yval, 0, converted); |
| |
| #ifdef ENABLE_COLOR |
| if (colorstrings != NULL && ISSET(COLOR_SYNTAX)) { |
| const colortype *tmpcolor = colorstrings; |
| |
| for (; tmpcolor != NULL; tmpcolor = tmpcolor->next) { |
| int x_start; |
| /* Starting column for mvwaddnstr. Zero-based. */ |
| int paintlen; |
| /* Number of chars to paint on this line. There are COLS |
| * characters on a whole line. */ |
| regmatch_t startmatch; /* match position for start_regexp */ |
| regmatch_t endmatch; /* match position for end_regexp */ |
| |
| if (tmpcolor->bright) |
| wattron(edit, A_BOLD); |
| wattron(edit, COLOR_PAIR(tmpcolor->pairnum)); |
| /* Two notes about regexec(). Return value 0 means there is |
| * a match. Also, rm_eo is the first non-matching character |
| * after the match. */ |
| |
| /* First case, tmpcolor is a single-line expression. */ |
| if (tmpcolor->end == NULL) { |
| size_t k = 0; |
| |
| /* We increment k by rm_eo, to move past the end of the |
| * last match. Even though two matches may overlap, we |
| * want to ignore them, so that we can highlight |
| * C-strings correctly. */ |
| while (k < endpos) { |
| /* Note the fifth parameter to regexec(). It says |
| * not to match the beginning-of-line character |
| * unless k is 0. If regexec() returns REG_NOMATCH, |
| * there are no more matches in the line. */ |
| if (regexec(&tmpcolor->start, &fileptr->data[k], 1, |
| &startmatch, k == 0 ? 0 : REG_NOTBOL) == REG_NOMATCH) |
| break; |
| /* Translate the match to the beginning of the line. */ |
| startmatch.rm_so += k; |
| startmatch.rm_eo += k; |
| if (startmatch.rm_so == startmatch.rm_eo) { |
| startmatch.rm_eo++; |
| statusbar(_("Refusing 0 length regex match")); |
| } else if (startmatch.rm_so < endpos && |
| startmatch.rm_eo > startpos) { |
| if (startmatch.rm_so <= startpos) |
| x_start = 0; |
| else |
| x_start = strnlenpt(fileptr->data, |
| startmatch.rm_so) - start; |
| paintlen = strnlenpt(fileptr->data, |
| startmatch.rm_eo) - start - x_start; |
| if (paintlen > COLS - x_start) |
| paintlen = COLS - x_start; |
| |
| assert(0 <= x_start && 0 < paintlen && |
| x_start + paintlen <= COLS); |
| mvwaddnstr(edit, yval, x_start, |
| converted + x_start, paintlen); |
| } |
| k = startmatch.rm_eo; |
| } |
| } else { |
| /* This is a multi-line regexp. There are two steps. |
| * First, we have to see if the beginning of the line is |
| * colored by a start on an earlier line, and an end on |
| * this line or later. |
| * |
| * We find the first line before fileptr matching the |
| * start. If every match on that line is followed by an |
| * end, then go to step two. Otherwise, find the next line |
| * after start_line matching the end. If that line is not |
| * before fileptr, then paint the beginning of this line. */ |
| |
| const filestruct *start_line = fileptr->prev; |
| /* the first line before fileptr matching start */ |
| regoff_t start_col; |
| /* where it starts in that line */ |
| const filestruct *end_line; |
| |
| while (start_line != NULL && |
| regexec(&tmpcolor->start, start_line->data, 1, |
| &startmatch, 0) == REG_NOMATCH) { |
| /* If there is an end on this line, there is no need |
| * to look for starts on earlier lines. */ |
| if (regexec(tmpcolor->end, start_line->data, 0, |
| NULL, 0) == 0) |
| goto step_two; |
| start_line = start_line->prev; |
| } |
| /* No start found, so skip to the next step. */ |
| if (start_line == NULL) |
| goto step_two; |
| /* Now start_line is the first line before fileptr |
| * containing a start match. Is there a start on this |
| * line not followed by an end on this line? */ |
| |
| start_col = 0; |
| while (TRUE) { |
| start_col += startmatch.rm_so; |
| startmatch.rm_eo -= startmatch.rm_so; |
| if (regexec(tmpcolor->end, |
| start_line->data + start_col + startmatch.rm_eo, |
| 0, NULL, start_col + startmatch.rm_eo == 0 ? 0 : |
| REG_NOTBOL) == REG_NOMATCH) |
| /* No end found after this start. */ |
| break; |
| start_col++; |
| if (regexec(&tmpcolor->start, |
| start_line->data + start_col, 1, |
| &startmatch, REG_NOTBOL) == REG_NOMATCH) |
| /* No later start on this line. */ |
| goto step_two; |
| } |
| /* Indeed, there is a start not followed on this line by |
| * an end. */ |
| |
| /* We have already checked that there is no end before |
| * fileptr and after the start. Is there an end after |
| * the start at all? We don't paint unterminated |
| * starts. */ |
| end_line = fileptr; |
| while (end_line != NULL && |
| regexec(tmpcolor->end, end_line->data, 1, |
| &endmatch, 0) == REG_NOMATCH) |
| end_line = end_line->next; |
| |
| /* No end found, or it is too early. */ |
| if (end_line == NULL || |
| (end_line == fileptr && endmatch.rm_eo <= startpos)) |
| goto step_two; |
| |
| /* Now paint the start of fileptr. */ |
| paintlen = end_line != fileptr ? COLS : |
| strnlenpt(fileptr->data, endmatch.rm_eo) - start; |
| if (paintlen > COLS) |
| paintlen = COLS; |
| |
| assert(0 < paintlen && paintlen <= COLS); |
| mvwaddnstr(edit, yval, 0, converted, paintlen); |
| |
| /* We have already painted the whole line. */ |
| if (paintlen == COLS) |
| goto skip_step_two; |
| |
| step_two: |
| /* Second step, we look for starts on this line. */ |
| start_col = 0; |
| while (start_col < endpos) { |
| if (regexec(&tmpcolor->start, |
| fileptr->data + start_col, 1, &startmatch, |
| start_col == 0 ? 0 : REG_NOTBOL) == REG_NOMATCH || |
| start_col + startmatch.rm_so >= endpos) |
| /* No more starts on this line. */ |
| break; |
| /* Translate the match to be relative to the |
| * beginning of the line. */ |
| startmatch.rm_so += start_col; |
| startmatch.rm_eo += start_col; |
| |
| if (startmatch.rm_so <= startpos) |
| x_start = 0; |
| else |
| x_start = strnlenpt(fileptr->data, |
| startmatch.rm_so) - start; |
| if (regexec(tmpcolor->end, |
| fileptr->data + startmatch.rm_eo, 1, &endmatch, |
| startmatch.rm_eo == 0 ? 0 : REG_NOTBOL) == 0) { |
| /* Translate the end match to be relative to the |
| * beginning of the line. */ |
| endmatch.rm_so += startmatch.rm_eo; |
| endmatch.rm_eo += startmatch.rm_eo; |
| /* There is an end on this line. But does it |
| * appear on this page, and is the match more |
| * than zero characters long? */ |
| if (endmatch.rm_eo > startpos && |
| endmatch.rm_eo > startmatch.rm_so) { |
| paintlen = strnlenpt(fileptr->data, |
| endmatch.rm_eo) - start - x_start; |
| if (x_start + paintlen > COLS) |
| paintlen = COLS - x_start; |
| |
| assert(0 <= x_start && 0 < paintlen && |
| x_start + paintlen <= COLS); |
| mvwaddnstr(edit, yval, x_start, |
| converted + x_start, paintlen); |
| } |
| } else { |
| /* There is no end on this line. But we haven't |
| * yet looked for one on later lines. */ |
| end_line = fileptr->next; |
| while (end_line != NULL && |
| regexec(tmpcolor->end, end_line->data, 0, |
| NULL, 0) == REG_NOMATCH) |
| end_line = end_line->next; |
| if (end_line != NULL) { |
| assert(0 <= x_start && x_start < COLS); |
| mvwaddnstr(edit, yval, x_start, |
| converted + x_start, COLS - x_start); |
| /* We painted to the end of the line, so |
| * don't bother checking any more starts. */ |
| break; |
| } |
| } |
| start_col = startmatch.rm_so + 1; |
| } /* while start_col < endpos */ |
| } /* if (tmp_color->end != NULL) */ |
| |
| skip_step_two: |
| wattroff(edit, A_BOLD); |
| wattroff(edit, COLOR_PAIR(tmpcolor->pairnum)); |
| } /* for tmpcolor in colorstrings */ |
| } |
| #endif /* ENABLE_COLOR */ |
| |
| #ifndef NANO_SMALL |
| if (ISSET(MARK_ISSET) |
| && (fileptr->lineno <= mark_beginbuf->lineno |
| || fileptr->lineno <= current->lineno) |
| && (fileptr->lineno >= mark_beginbuf->lineno |
| || fileptr->lineno >= current->lineno)) { |
| /* fileptr is at least partially selected. */ |
| |
| const filestruct *top; |
| /* Either current or mark_beginbuf, whichever is first. */ |
| size_t top_x; |
| /* current_x or mark_beginx, corresponding to top. */ |
| const filestruct *bot; |
| size_t bot_x; |
| int x_start; |
| /* Starting column for mvwaddnstr. Zero-based. */ |
| int paintlen; |
| /* Number of chars to paint on this line. There are COLS |
| * characters on a whole line. */ |
| |
| mark_order(&top, &top_x, &bot, &bot_x); |
| |
| if (top->lineno < fileptr->lineno || top_x < startpos) |
| top_x = startpos; |
| if (bot->lineno > fileptr->lineno || bot_x > endpos) |
| bot_x = endpos; |
| |
| /* The selected bit of fileptr is on this page. */ |
| if (top_x < endpos && bot_x > startpos) { |
| assert(startpos <= top_x); |
| |
| /* x_start is the expanded location of the beginning of the |
| * mark minus the beginning of the page. */ |
| x_start = strnlenpt(fileptr->data, top_x) - start; |
| |
| if (bot_x >= endpos) |
| /* If the end of the mark is off the page, paintlen is |
| * -1, meaning that everything on the line gets |
| * painted. */ |
| paintlen = -1; |
| else |
| /* Otherwise, paintlen is the expanded location of the |
| * end of the mark minus the expanded location of the |
| * beginning of the mark. */ |
| paintlen = strnlenpt(fileptr->data, bot_x) |
| - (x_start + start); |
| |
| /* If x_start is before the beginning of the page, shift |
| * paintlen x_start characters to compensate, and put |
| * x_start at the beginning of the page. */ |
| if (x_start < 0) { |
| paintlen += x_start; |
| x_start = 0; |
| } |
| |
| assert(x_start >= 0 && x_start <= strlen(converted)); |
| |
| wattron(edit, A_REVERSE); |
| mvwaddnstr(edit, yval, x_start, converted + x_start, paintlen); |
| wattroff(edit, A_REVERSE); |
| } |
| } |
| #endif /* !NANO_SMALL */ |
| } |
| |
| /* Just update one line in the edit buffer. Basically a wrapper for |
| * edit_add(). |
| * |
| * If fileptr != current, then index is considered 0. The line will be |
| * displayed starting with fileptr->data[index]. Likely args are |
| * current_x or 0. */ |
| void update_line(const filestruct *fileptr, size_t index) |
| { |
| int line; |
| /* line in the edit window for CURSES calls */ |
| char *converted; |
| /* fileptr->data converted to have tabs and control characters |
| * expanded. */ |
| size_t page_start; |
| |
| assert(fileptr != NULL); |
| |
| line = fileptr->lineno - edittop->lineno; |
| |
| /* We assume the line numbers are valid. Is that really true? */ |
| assert(line < 0 || line == check_linenumbers(fileptr)); |
| |
| if (line < 0 || line >= editwinrows) |
| return; |
| |
| /* First, blank out the line (at a minimum) */ |
| mvwaddstr(edit, line, 0, hblank); |
| |
| /* Next, convert variables that index the line to their equivalent |
| * positions in the expanded line. */ |
| index = (fileptr == current) ? strnlenpt(fileptr->data, index) : 0; |
| page_start = get_page_start(index); |
| |
| /* Expand the line, replacing Tab by spaces, and control characters |
| * by their display form. */ |
| converted = display_string(fileptr->data, page_start, COLS); |
| |
| /* Now, paint the line */ |
| edit_add(fileptr, converted, line, page_start); |
| free(converted); |
| |
| if (page_start > 0) |
| mvwaddch(edit, line, 0, '$'); |
| if (strlenpt(fileptr->data) > page_start + COLS) |
| mvwaddch(edit, line, COLS - 1, '$'); |
| } |
| |
| /* Return a nonzero value if we need an update after moving |
| * horizontally. We need one if the mark is on or if old_pww and |
| * placewewant are on different pages. */ |
| int need_horizontal_update(size_t old_pww) |
| { |
| return |
| #ifndef NANO_SMALL |
| ISSET(MARK_ISSET) || |
| #endif |
| get_page_start(old_pww) != get_page_start(placewewant); |
| } |
| |
| /* Return a nonzero value if we need an update after moving vertically. |
| * We need one if the mark is on or if old_pww and placewewant |
| * are on different pages. */ |
| int need_vertical_update(size_t old_pww) |
| { |
| return |
| #ifndef NANO_SMALL |
| ISSET(MARK_ISSET) || |
| #endif |
| get_page_start(old_pww) != get_page_start(placewewant); |
| } |
| |
| /* Scroll the edit window in the given direction and the given number |
| * of lines, and draw new lines on the blank lines left after the |
| * scrolling. direction is the direction to scroll, either UP or DOWN, |
| * and nlines is the number of lines to scroll. Don't redraw the old |
| * topmost or bottommost line (where we assume current is) before |
| * scrolling or draw the new topmost or bottommost line after scrolling |
| * (where we assume current will be), since we don't know where we are |
| * on the page or whether we'll stay there. */ |
| void edit_scroll(updown direction, int nlines) |
| { |
| filestruct *foo; |
| int i, scroll_rows = 0; |
| |
| /* Scrolling less than one line or more than editwinrows lines is |
| * redundant, so don't allow it. */ |
| if (nlines < 1 || nlines > editwinrows) |
| return; |
| |
| /* Move the top line of the edit window up or down (depending on the |
| * value of direction) nlines lines. If there are fewer lines of |
| * text than that left, move it to the top or bottom line of the |
| * file (depending on the value of direction). Keep track of |
| * how many lines we moved in scroll_rows. */ |
| for (i = nlines; i > 0; i--) { |
| if (direction == UP) { |
| if (edittop->prev == NULL) |
| break; |
| edittop = edittop->prev; |
| scroll_rows--; |
| } else { |
| if (edittop->next == NULL) |
| break; |
| edittop = edittop->next; |
| scroll_rows++; |
| } |
| } |
| |
| /* Scroll the text on the screen up or down scroll_rows lines, |
| * depending on the value of direction. */ |
| scrollok(edit, TRUE); |
| wscrl(edit, scroll_rows); |
| scrollok(edit, FALSE); |
| |
| foo = edittop; |
| if (direction != UP) { |
| int slines = editwinrows - nlines; |
| for (; slines > 0 && foo != NULL; slines--) |
| foo = foo->next; |
| } |
| |
| /* And draw new lines on the blank top or bottom lines of the edit |
| * window, depending on the value of direction. Don't draw the new |
| * topmost or new bottommost line. */ |
| while (scroll_rows != 0 && foo != NULL) { |
| if (foo->next != NULL) |
| update_line(foo, 0); |
| if (direction == UP) |
| scroll_rows++; |
| else |
| scroll_rows--; |
| foo = foo->next; |
| } |
| } |
| |
| /* Update any lines between old_current and current that need to be |
| * updated. */ |
| void edit_redraw(const filestruct *old_current, size_t old_pww) |
| { |
| int do_refresh = need_vertical_update(0) || |
| need_vertical_update(old_pww); |
| const filestruct *foo; |
| |
| /* If either old_current or current is offscreen, refresh the screen |
| * and get out. */ |
| if (old_current->lineno < edittop->lineno || old_current->lineno >= |
| edittop->lineno + editwinrows || current->lineno < |
| edittop->lineno || current->lineno >= edittop->lineno + |
| editwinrows) { |
| edit_refresh(); |
| return; |
| } |
| |
| /* Update old_current and current if we're not on the first page |
| * and/or we're not on the same page as before. If the mark is on, |
| * update all the lines between old_current and current too. */ |
| foo = old_current; |
| while (foo != current) { |
| if (do_refresh) |
| update_line(foo, 0); |
| #ifndef NANO_SMALL |
| if (!ISSET(MARK_ISSET)) |
| #endif |
| break; |
| if (foo->lineno > current->lineno) |
| foo = foo->prev; |
| else |
| foo = foo->next; |
| } |
| if (do_refresh) |
| update_line(current, current_x); |
| } |
| |
| /* Refresh the screen without changing the position of lines. */ |
| void edit_refresh(void) |
| { |
| /* Neither of these conditions should occur, but they do. edittop |
| * is NULL when you open an existing file on the command line, and |
| * ENABLE_COLOR is defined. Yuck. */ |
| if (current == NULL) |
| return; |
| if (edittop == NULL) |
| edittop = current; |
| |
| if (current->lineno < edittop->lineno || |
| current->lineno >= edittop->lineno + editwinrows) |
| /* Note that edit_update() changes edittop so that |
| * current->lineno = edittop->lineno + editwinrows / 2. Thus |
| * when it then calls edit_refresh(), there is no danger of |
| * getting an infinite loop. */ |
| edit_update(current, CENTER); |
| else { |
| int nlines = 0; |
| const filestruct *foo = edittop; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "edit_refresh(): edittop->lineno = %d\n", edittop->lineno); |
| #endif |
| |
| while (nlines < editwinrows) { |
| update_line(foo, foo == current ? current_x : 0); |
| nlines++; |
| if (foo->next == NULL) |
| break; |
| foo = foo->next; |
| } |
| while (nlines < editwinrows) { |
| mvwaddstr(edit, nlines, 0, hblank); |
| nlines++; |
| } |
| reset_cursor(); |
| wrefresh(edit); |
| } |
| } |
| |
| /* Nice generic routine to update the edit buffer, given a pointer to the |
| * file struct =) */ |
| void edit_update(filestruct *fileptr, topmidnone location) |
| { |
| if (fileptr == NULL) |
| return; |
| |
| if (location != TOP) { |
| int goal = (location == NONE) ? current_y : editwinrows / 2; |
| |
| for (; goal > 0 && fileptr->prev != NULL; goal--) |
| fileptr = fileptr->prev; |
| } |
| edittop = fileptr; |
| edit_refresh(); |
| } |
| |
| /* Ask a question on the statusbar. Answer will be stored in answer |
| * global. Returns -1 on aborted enter, -2 on a blank string, and 0 |
| * otherwise, the valid shortcut key caught. Def is any editable text we |
| * want to put up by default. |
| * |
| * New arg tabs tells whether or not to allow tab completion. */ |
| int statusq(int allowtabs, const shortcut *s, const char *def, |
| #ifndef NANO_SMALL |
| historyheadtype *which_history, |
| #endif |
| const char *msg, ...) |
| { |
| va_list ap; |
| char *foo = charalloc(COLS - 3); |
| int ret; |
| #ifndef DISABLE_TABCOMP |
| bool list = FALSE; |
| #endif |
| |
| bottombars(s); |
| |
| va_start(ap, msg); |
| vsnprintf(foo, COLS - 4, msg, ap); |
| va_end(ap); |
| foo[COLS - 4] = '\0'; |
| |
| ret = nanogetstr(allowtabs, foo, def, |
| #ifndef NANO_SMALL |
| which_history, |
| #endif |
| s |
| #ifndef DISABLE_TABCOMP |
| , &list |
| #endif |
| ); |
| free(foo); |
| resetstatuspos = 0; |
| |
| switch (ret) { |
| case NANO_FIRSTLINE_KEY: |
| case NANO_FIRSTLINE_FKEY: |
| do_first_line(); |
| resetstatuspos = 1; |
| break; |
| case NANO_LASTLINE_KEY: |
| case NANO_LASTLINE_FKEY: |
| do_last_line(); |
| resetstatuspos = 1; |
| break; |
| #ifndef DISABLE_JUSTIFY |
| case NANO_PARABEGIN_KEY: |
| do_para_begin(); |
| resetstatuspos = 1; |
| break; |
| case NANO_PARAEND_KEY: |
| do_para_end(); |
| resetstatuspos = 1; |
| break; |
| case NANO_FULLJUSTIFY_KEY: |
| if (!ISSET(VIEW_MODE)) |
| do_full_justify(); |
| resetstatuspos = 1; |
| break; |
| #endif |
| case NANO_CANCEL_KEY: |
| ret = -1; |
| resetstatuspos = 1; |
| break; |
| } |
| blank_statusbar(); |
| |
| #ifdef DEBUG |
| fprintf(stderr, "I got \"%s\"\n", answer); |
| #endif |
| |
| #ifndef DISABLE_TABCOMP |
| /* if we've done tab completion, there might be a list of |
| filename matches on the edit window at this point; make sure |
| they're cleared off. */ |
| if (list) |
| edit_refresh(); |
| #endif |
| |
| return ret; |
| } |
| |
| /* Ask a simple yes/no question, specified in msg, on the statusbar. |
| * Return 1 for Y, 0 for N, 2 for All (if all is TRUE when passed in) |
| * and -1 for abort (^C). */ |
| int do_yesno(int all, const char *msg) |
| { |
| int ok = -2, width = 16; |
| const char *yesstr; /* String of yes characters accepted. */ |
| const char *nostr; /* Same for no. */ |
| const char *allstr; /* And all, surprise! */ |
| |
| /* yesstr, nostr, and allstr are strings of any length. Each string |
| * consists of all characters accepted as a valid character for that |
| * value. The first value will be the one displayed in the |
| * shortcuts. Translators: if possible, specify both the shortcuts |
| * for your language and English. For example, in French: "OoYy" |
| * for "Oui". */ |
| yesstr = _("Yy"); |
| nostr = _("Nn"); |
| allstr = _("Aa"); |
| |
| if (!ISSET(NO_HELP)) { |
| char shortstr[3]; /* Temp string for Y, N, A. */ |
| |
| if (COLS < 32) |
| width = COLS / 2; |
| |
| /* Write the bottom of the screen. */ |
| blank_bottombars(); |
| |
| sprintf(shortstr, " %c", yesstr[0]); |
| wmove(bottomwin, 1, 0); |
| onekey(shortstr, _("Yes"), width); |
| |
| if (all) { |
| wmove(bottomwin, 1, width); |
| shortstr[1] = allstr[0]; |
| onekey(shortstr, _("All"), width); |
| } |
| |
| wmove(bottomwin, 2, 0); |
| shortstr[1] = nostr[0]; |
| onekey(shortstr, _("No"), width); |
| |
| wmove(bottomwin, 2, 16); |
| onekey("^C", _("Cancel"), width); |
| } |
| |
| wattron(bottomwin, A_REVERSE); |
| |
| blank_statusbar(); |
| mvwaddnstr(bottomwin, 0, 0, msg, COLS - 1); |
| |
| wattroff(bottomwin, A_REVERSE); |
| |
| wrefresh(bottomwin); |
| |
| do { |
| int kbinput; |
| bool meta_key; |
| #ifndef DISABLE_MOUSE |
| int mouse_x, mouse_y; |
| #endif |
| |
| kbinput = get_kbinput(edit, &meta_key); |
| |
| if (kbinput == NANO_CANCEL_KEY) |
| ok = -1; |
| #ifndef DISABLE_MOUSE |
| /* Look ma! We get to duplicate lots of code from |
| * get_edit_mouse()!! */ |
| else if (kbinput == KEY_MOUSE) { |
| get_mouseinput(&mouse_x, &mouse_y, FALSE); |
| |
| if (mouse_x != -1 && mouse_y != -1 && !ISSET(NO_HELP) && |
| wenclose(bottomwin, mouse_y, mouse_x) && mouse_x < |
| (width * 2) && mouse_y >= editwinrows + 3) { |
| int x = mouse_x / width; |
| /* Did we click in the first column of shortcuts, or |
| * the second? */ |
| int y = mouse_y - editwinrows - 3; |
| /* Did we click in the first row of shortcuts? */ |
| |
| assert(0 <= x && x <= 1 && 0 <= y && y <= 1); |
| |
| /* x = 0 means they clicked Yes or No. |
| * y = 0 means Yes or All. */ |
| ok = -2 * x * y + x - y + 1; |
| |
| if (ok == 2 && !all) |
| ok = -2; |
| } |
| } |
| #endif |
| /* Look for the kbinput in the yes, no and (optionally) all |
| * strings. */ |
| else if (strchr(yesstr, kbinput) != NULL) |
| ok = 1; |
| else if (strchr(nostr, kbinput) != NULL) |
| ok = 0; |
| else if (all && strchr(allstr, kbinput) != NULL) |
| ok = 2; |
| } while (ok == -2); |
| |
| return ok; |
| } |
| |
| void total_refresh(void) |
| { |
| clearok(topwin, TRUE); |
| clearok(edit, TRUE); |
| clearok(bottomwin, TRUE); |
| wnoutrefresh(topwin); |
| wnoutrefresh(edit); |
| wnoutrefresh(bottomwin); |
| doupdate(); |
| clearok(topwin, FALSE); |
| clearok(edit, FALSE); |
| clearok(bottomwin, FALSE); |
| edit_refresh(); |
| titlebar(NULL); |
| } |
| |
| void display_main_list(void) |
| { |
| bottombars(main_list); |
| } |
| |
| /* If constant is FALSE, the user typed Ctrl-C, so we unconditionally |
| * display the cursor position. Otherwise, we display it only if the |
| * character position changed and DISABLE_CURPOS is not set. |
| * |
| * If constant is TRUE and DISABLE_CURPOS is set, we unset it and update |
| * old_i and old_totsize. That way, we leave the current statusbar |
| * alone, but next time we will display. */ |
| void do_cursorpos(bool constant) |
| { |
| const filestruct *fileptr; |
| unsigned long i = 0; |
| static unsigned long old_i = 0; |
| static long old_totsize = -1; |
| |
| assert(current != NULL && fileage != NULL && totlines != 0); |
| |
| if (old_totsize == -1) |
| old_totsize = totsize; |
| |
| for (fileptr = fileage; fileptr != current; fileptr = fileptr->next) { |
| assert(fileptr != NULL); |
| i += strlen(fileptr->data) + 1; |
| } |
| i += current_x; |
| |
| /* Check whether totsize is correct. Else there is a bug |
| * somewhere. */ |
| assert(current != filebot || i == totsize); |
| |
| if (constant && ISSET(DISABLE_CURPOS)) { |
| UNSET(DISABLE_CURPOS); |
| old_i = i; |
| old_totsize = totsize; |
| return; |
| } |
| |
| /* If constant is FALSE, display the position on the statusbar |
| * unconditionally; otherwise, only display the position when the |
| * character values have changed. */ |
| if (!constant || old_i != i || old_totsize != totsize) { |
| size_t xpt = xplustabs() + 1; |
| size_t cur_len = strlenpt(current->data) + 1; |
| int linepct = 100 * current->lineno / totlines; |
| int colpct = 100 * xpt / cur_len; |
| int bytepct = totsize == 0 ? 0 : 100 * i / totsize; |
| |
| statusbar( |
| _("line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%ld (%d%%)"), |
| current->lineno, totlines, linepct, |
| (unsigned long)xpt, (unsigned long)cur_len, colpct, |
| i, totsize, bytepct); |
| UNSET(DISABLE_CURPOS); |
| } |
| |
| old_i = i; |
| old_totsize = totsize; |
| } |
| |
| void do_cursorpos_void(void) |
| { |
| do_cursorpos(FALSE); |
| } |
| |
| #ifndef DISABLE_HELP |
| /* Calculate the next line of help_text, starting at ptr. */ |
| int help_line_len(const char *ptr) |
| { |
| int j = 0; |
| |
| while (*ptr != '\n' && *ptr != '\0' && j < COLS - 5) { |
| ptr++; |
| j++; |
| } |
| if (j == COLS - 5) { |
| /* Don't wrap at the first of two spaces following a period. */ |
| if (*ptr == ' ' && *(ptr + 1) == ' ') |
| j++; |
| /* Don't print half a word if we've run out of space. */ |
| while (*ptr != ' ' && j > 0) { |
| ptr--; |
| j--; |
| } |
| /* Word longer than COLS - 5 chars just gets broken. */ |
| if (j == 0) |
| j = COLS - 5; |
| } |
| assert(j >= 0 && j <= COLS - 4 && (j > 0 || *ptr == '\n')); |
| return j; |
| } |
| |
| /* Our dynamic, shortcut-list-compliant help function. */ |
| void do_help(void) |
| { |
| int line = 0; |
| /* The line number in help_text of the first displayed help line. |
| * This variable is zero-based. */ |
| bool no_more = FALSE; |
| /* no_more means the end of the help text is shown, so don't go |
| * down any more. */ |
| int kbinput = ERR; |
| bool meta_key; |
| |
| bool old_no_help = ISSET(NO_HELP); |
| #ifndef DISABLE_MOUSE |
| const shortcut *oldshortcut = currshortcut; |
| /* We will set currshortcut to allow clicking on the help |
| * screen's shortcut list. */ |
| #endif |
| |
| curs_set(0); |
| blank_edit(); |
| wattroff(bottomwin, A_REVERSE); |
| blank_statusbar(); |
| |
| /* Set help_text as the string to display. */ |
| help_init(); |
| assert(help_text != NULL); |
| |
| #ifndef DISABLE_MOUSE |
| /* Set currshortcut to allow clicking on the help screen's shortcut |
| * list, AFTER help_init(). */ |
| currshortcut = help_list; |
| #endif |
| |
| if (ISSET(NO_HELP)) { |
| /* Make sure that the help screen's shortcut list will actually |
| * be displayed. */ |
| UNSET(NO_HELP); |
| window_init(); |
| } |
| bottombars(help_list); |
| |
| do { |
| int i; |
| int old_line = line; |
| /* We redisplay the help only if it moved. */ |
| const char *ptr = help_text; |
| |
| switch (kbinput) { |
| #ifndef DISABLE_MOUSE |
| case KEY_MOUSE: |
| { |
| int mouse_x, mouse_y; |
| get_mouseinput(&mouse_x, &mouse_y, TRUE); |
| } |
| break; |
| #endif |
| case NANO_NEXTPAGE_KEY: |
| case NANO_NEXTPAGE_FKEY: |
| if (!no_more) |
| line += editwinrows - 2; |
| break; |
| case NANO_PREVPAGE_KEY: |
| case NANO_PREVPAGE_FKEY: |
| if (line > 0) { |
| line -= editwinrows - 2; |
| if (line < 0) |
| line = 0; |
| } |
| break; |
| case NANO_PREVLINE_KEY: |
| if (line > 0) |
| line--; |
| break; |
| case NANO_NEXTLINE_KEY: |
| if (!no_more) |
| line++; |
| break; |
| } |
| |
| if (line == old_line && kbinput != ERR) |
| goto skip_redisplay; |
| |
| blank_edit(); |
| |
| assert(COLS > 5); |
| |
| /* Calculate where in the text we should be, based on the |
| * page. */ |
| for (i = 0; i < line; i++) { |
| ptr += help_line_len(ptr); |
| if (*ptr == '\n') |
| ptr++; |
| } |
| |
| for (i = 0; i < editwinrows && *ptr != '\0'; i++) { |
| int j = help_line_len(ptr); |
| |
| mvwaddnstr(edit, i, 0, ptr, j); |
| ptr += j; |
| if (*ptr == '\n') |
| ptr++; |
| } |
| no_more = (*ptr == '\0'); |
| |
| skip_redisplay: |
| kbinput = get_kbinput(edit, &meta_key); |
| } while (kbinput != NANO_CANCEL_KEY && kbinput != NANO_EXIT_KEY && |
| kbinput != NANO_EXIT_FKEY); |
| |
| #ifndef DISABLE_MOUSE |
| currshortcut = oldshortcut; |
| #endif |
| |
| if (old_no_help) { |
| blank_bottombars(); |
| wrefresh(bottomwin); |
| SET(NO_HELP); |
| window_init(); |
| } else |
| bottombars(currshortcut); |
| |
| curs_set(1); |
| edit_refresh(); |
| |
| /* The help_init() at the beginning allocated help_text. Since |
| * help_text has now been written to the screen, we don't need it |
| * anymore. */ |
| free(help_text); |
| help_text = NULL; |
| } |
| #endif /* !DISABLE_HELP */ |
| |
| /* Highlight the current word being replaced or spell checked. We |
| * expect word to have tabs and control characters expanded. */ |
| void do_replace_highlight(int highlight_flag, const char *word) |
| { |
| size_t y = xplustabs(); |
| size_t word_len = strlen(word); |
| |
| y = get_page_start(y) + COLS - y; |
| /* Now y is the number of characters we can display on this |
| * line. */ |
| |
| reset_cursor(); |
| |
| if (highlight_flag) |
| wattron(edit, A_REVERSE); |
| |
| #ifdef HAVE_REGEX_H |
| /* This is so we can show zero-length regexes. */ |
| if (word_len == 0) |
| waddstr(edit, " "); |
| else |
| #endif |
| waddnstr(edit, word, y - 1); |
| |
| if (word_len > y) |
| waddch(edit, '$'); |
| else if (word_len == y) |
| waddch(edit, word[word_len - 1]); |
| |
| if (highlight_flag) |
| wattroff(edit, A_REVERSE); |
| } |
| |
| #ifdef DEBUG |
| /* Dump the passed-in file structure to stderr. */ |
| void dump_buffer(const filestruct *inptr) |
| { |
| if (inptr == fileage) |
| fprintf(stderr, "Dumping file buffer to stderr...\n"); |
| else if (inptr == cutbuffer) |
| fprintf(stderr, "Dumping cutbuffer to stderr...\n"); |
| else |
| fprintf(stderr, "Dumping a buffer to stderr...\n"); |
| |
| while (inptr != NULL) { |
| fprintf(stderr, "(%d) %s\n", inptr->lineno, inptr->data); |
| inptr = inptr->next; |
| } |
| } |
| |
| /* Dump the file structure to stderr in reverse. */ |
| void dump_buffer_reverse(void) |
| { |
| const filestruct *fileptr = filebot; |
| |
| while (fileptr != NULL) { |
| fprintf(stderr, "(%d) %s\n", fileptr->lineno, fileptr->data); |
| fileptr = fileptr->prev; |
| } |
| } |
| #endif /* DEBUG */ |
| |
| #ifdef NANO_EXTRA |
| #define CREDIT_LEN 53 |
| #define XLCREDIT_LEN 8 |
| |
| /* Easter egg: Display credits. Assume nodelay(edit) is FALSE. */ |
| void do_credits(void) |
| { |
| int crpos = 0, xlpos = 0; |
| const char *credits[CREDIT_LEN] = { |
| NULL, /* "The nano text editor" */ |
| NULL, /* "version" */ |
| VERSION, |
| "", |
| NULL, /* "Brought to you by:" */ |
| "Chris Allegretta", |
| "Jordi Mallach", |
| "Adam Rogoyski", |
| "Rob Siemborski", |
| "Rocco Corsi", |
| "David Lawrence Ramsey", |
| "David Benbennick", |
| "Ken Tyler", |
| "Sven Guckes", |
| "Florian König", |
| "Pauli Virtanen", |
| "Daniele Medri", |
| "Clement Laforet", |
| "Tedi Heriyanto", |
| "Bill Soudan", |
| "Christian Weisgerber", |
| "Erik Andersen", |
| "Big Gaute", |
| "Joshua Jensen", |
| "Ryan Krebs", |
| "Albert Chin", |
| "", |
| NULL, /* "Special thanks to:" */ |
| "Plattsburgh State University", |
| "Benet Laboratories", |
| "Amy Allegretta", |
| "Linda Young", |
| "Jeremy Robichaud", |
| "Richard Kolb II", |
| NULL, /* "The Free Software Foundation" */ |
| "Linus Torvalds", |
| NULL, /* "For ncurses:" */ |
| "Thomas Dickey", |
| "Pavel Curtis", |
| "Zeyd Ben-Halim", |
| "Eric S. Raymond", |
| NULL, /* "and anyone else we forgot..." */ |
| NULL, /* "Thank you for using nano!" */ |
| "", |
| "", |
| "", |
| "", |
| "(c) 1999-2004 Chris Allegretta", |
| "", |
| "", |
| "", |
| "", |
| "http://www.nano-editor.org/" |
| }; |
| |
| const char *xlcredits[XLCREDIT_LEN] = { |
| N_("The nano text editor"), |
| N_("version"), |
| N_("Brought to you by:"), |
| N_("Special thanks to:"), |
| N_("The Free Software Foundation"), |
| N_("For ncurses:"), |
| N_("and anyone else we forgot..."), |
| N_("Thank you for using nano!") |
| }; |
| |
| curs_set(0); |
| nodelay(edit, TRUE); |
| scrollok(edit, TRUE); |
| blank_titlebar(); |
| blank_edit(); |
| blank_statusbar(); |
| blank_bottombars(); |
| wrefresh(topwin); |
| wrefresh(edit); |
| wrefresh(bottomwin); |
| |
| for (crpos = 0; crpos < CREDIT_LEN + editwinrows / 2; crpos++) { |
| if (wgetch(edit) != ERR) |
| break; |
| if (crpos < CREDIT_LEN) { |
| const char *what = credits[crpos]; |
| size_t start_x; |
| |
| if (what == NULL) { |
| assert(0 <= xlpos && xlpos < XLCREDIT_LEN); |
| what = _(xlcredits[xlpos]); |
| xlpos++; |
| } |
| start_x = COLS / 2 - strlen(what) / 2 - 1; |
| mvwaddstr(edit, editwinrows - 1 - editwinrows % 2, start_x, what); |
| } |
| napms(700); |
| scroll(edit); |
| wrefresh(edit); |
| if (wgetch(edit) != ERR) |
| break; |
| napms(700); |
| scroll(edit); |
| wrefresh(edit); |
| } |
| |
| scrollok(edit, FALSE); |
| nodelay(edit, FALSE); |
| curs_set(1); |
| display_main_list(); |
| total_refresh(); |
| } |
| #endif |