| /* |
| * Copyright (C) 2020 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <linux/if.h> |
| #include <linux/ip.h> |
| #include <linux/ipv6.h> |
| #include <linux/pkt_cls.h> |
| #include <linux/tcp.h> |
| |
| // bionic kernel uapi linux/udp.h header is munged... |
| #define __kernel_udphdr udphdr |
| #include <linux/udp.h> |
| |
| #include "bpf_helpers.h" |
| #include "bpf_net_helpers.h" |
| #include "bpf_tethering.h" |
| #include "netdbpf/bpf_shared.h" |
| |
| // From kernel:include/net/ip.h |
| #define IP_DF 0x4000 // Flag: "Don't Fragment" |
| |
| // Tethering stats, indexed by upstream interface. |
| DEFINE_BPF_MAP_GRW(tether_stats_map, HASH, TetherStatsKey, TetherStatsValue, 16, AID_NETWORK_STACK) |
| |
| // Tethering data limit, indexed by upstream interface. |
| // (tethering allowed when stats[iif].rxBytes + stats[iif].txBytes < limit[iif]) |
| DEFINE_BPF_MAP_GRW(tether_limit_map, HASH, TetherLimitKey, TetherLimitValue, 16, AID_NETWORK_STACK) |
| |
| // ----- IPv6 Support ----- |
| |
| DEFINE_BPF_MAP_GRW(tether_downstream6_map, HASH, TetherDownstream6Key, Tether6Value, 64, |
| AID_NETWORK_STACK) |
| |
| DEFINE_BPF_MAP_GRW(tether_downstream64_map, HASH, TetherDownstream64Key, TetherDownstream64Value, |
| 64, AID_NETWORK_STACK) |
| |
| DEFINE_BPF_MAP_GRW(tether_upstream6_map, HASH, TetherUpstream6Key, Tether6Value, 64, |
| AID_NETWORK_STACK) |
| |
| DEFINE_BPF_MAP_GRW(tether_error_map, ARRAY, __u32, __u32, BPF_TETHER_ERR__MAX, |
| AID_NETWORK_STACK) |
| |
| #define COUNT_AND_RETURN(counter, ret) do { \ |
| __u32 code = BPF_TETHER_ERR_ ## counter; \ |
| __u32 *count = bpf_tether_error_map_lookup_elem(&code); \ |
| if (count) __sync_fetch_and_add(count, 1); \ |
| return ret; \ |
| } while(0) |
| |
| #define DROP(counter) COUNT_AND_RETURN(counter, TC_ACT_SHOT) |
| #define PUNT(counter) COUNT_AND_RETURN(counter, TC_ACT_OK) |
| |
| static inline __always_inline int do_forward6(struct __sk_buff* skb, const bool is_ethernet, |
| const bool downstream) { |
| const int l2_header_size = is_ethernet ? sizeof(struct ethhdr) : 0; |
| void* data = (void*)(long)skb->data; |
| const void* data_end = (void*)(long)skb->data_end; |
| struct ethhdr* eth = is_ethernet ? data : NULL; // used iff is_ethernet |
| struct ipv6hdr* ip6 = is_ethernet ? (void*)(eth + 1) : data; |
| |
| // Require ethernet dst mac address to be our unicast address. |
| if (is_ethernet && (skb->pkt_type != PACKET_HOST)) return TC_ACT_OK; |
| |
| // Must be meta-ethernet IPv6 frame |
| if (skb->protocol != htons(ETH_P_IPV6)) return TC_ACT_OK; |
| |
| // Must have (ethernet and) ipv6 header |
| if (data + l2_header_size + sizeof(*ip6) > data_end) return TC_ACT_OK; |
| |
| // Ethertype - if present - must be IPv6 |
| if (is_ethernet && (eth->h_proto != htons(ETH_P_IPV6))) return TC_ACT_OK; |
| |
| // IP version must be 6 |
| if (ip6->version != 6) PUNT(INVALID_IP_VERSION); |
| |
| // Cannot decrement during forward if already zero or would be zero, |
| // Let the kernel's stack handle these cases and generate appropriate ICMP errors. |
| if (ip6->hop_limit <= 1) PUNT(LOW_TTL); |
| |
| // If hardware offload is running and programming flows based on conntrack entries, |
| // try not to interfere with it. |
| if (ip6->nexthdr == IPPROTO_TCP) { |
| struct tcphdr* tcph = (void*)(ip6 + 1); |
| |
| // Make sure we can get at the tcp header |
| if (data + l2_header_size + sizeof(*ip6) + sizeof(*tcph) > data_end) |
| PUNT(INVALID_TCP_HEADER); |
| |
| // Do not offload TCP packets with any one of the SYN/FIN/RST flags |
| if (tcph->syn || tcph->fin || tcph->rst) PUNT(TCP_CONTROL_PACKET); |
| } |
| |
| // Protect against forwarding packets sourced from ::1 or fe80::/64 or other weirdness. |
| __be32 src32 = ip6->saddr.s6_addr32[0]; |
| if (src32 != htonl(0x0064ff9b) && // 64:ff9b:/32 incl. XLAT464 WKP |
| (src32 & htonl(0xe0000000)) != htonl(0x20000000)) // 2000::/3 Global Unicast |
| PUNT(NON_GLOBAL_SRC); |
| |
| // Protect against forwarding packets destined to ::1 or fe80::/64 or other weirdness. |
| __be32 dst32 = ip6->daddr.s6_addr32[0]; |
| if (dst32 != htonl(0x0064ff9b) && // 64:ff9b:/32 incl. XLAT464 WKP |
| (dst32 & htonl(0xe0000000)) != htonl(0x20000000)) // 2000::/3 Global Unicast |
| PUNT(NON_GLOBAL_DST); |
| |
| // In the upstream direction do not forward traffic within the same /64 subnet. |
| if (!downstream && (src32 == dst32) && (ip6->saddr.s6_addr32[1] == ip6->daddr.s6_addr32[1])) |
| PUNT(LOCAL_SRC_DST); |
| |
| TetherDownstream6Key kd = { |
| .iif = skb->ifindex, |
| .neigh6 = ip6->daddr, |
| }; |
| |
| TetherUpstream6Key ku = { |
| .iif = skb->ifindex, |
| }; |
| |
| Tether6Value* v = downstream ? bpf_tether_downstream6_map_lookup_elem(&kd) |
| : bpf_tether_upstream6_map_lookup_elem(&ku); |
| |
| // If we don't find any offload information then simply let the core stack handle it... |
| if (!v) return TC_ACT_OK; |
| |
| uint32_t stat_and_limit_k = downstream ? skb->ifindex : v->oif; |
| |
| TetherStatsValue* stat_v = bpf_tether_stats_map_lookup_elem(&stat_and_limit_k); |
| |
| // If we don't have anywhere to put stats, then abort... |
| if (!stat_v) PUNT(NO_STATS_ENTRY); |
| |
| uint64_t* limit_v = bpf_tether_limit_map_lookup_elem(&stat_and_limit_k); |
| |
| // If we don't have a limit, then abort... |
| if (!limit_v) PUNT(NO_LIMIT_ENTRY); |
| |
| // Required IPv6 minimum mtu is 1280, below that not clear what we should do, abort... |
| if (v->pmtu < IPV6_MIN_MTU) PUNT(BELOW_IPV6_MTU); |
| |
| // Approximate handling of TCP/IPv6 overhead for incoming LRO/GRO packets: default |
| // outbound path mtu of 1500 is not necessarily correct, but worst case we simply |
| // undercount, which is still better then not accounting for this overhead at all. |
| // Note: this really shouldn't be device/path mtu at all, but rather should be |
| // derived from this particular connection's mss (ie. from gro segment size). |
| // This would require a much newer kernel with newer ebpf accessors. |
| // (This is also blindly assuming 12 bytes of tcp timestamp option in tcp header) |
| uint64_t packets = 1; |
| uint64_t bytes = skb->len; |
| if (bytes > v->pmtu) { |
| const int tcp_overhead = sizeof(struct ipv6hdr) + sizeof(struct tcphdr) + 12; |
| const int mss = v->pmtu - tcp_overhead; |
| const uint64_t payload = bytes - tcp_overhead; |
| packets = (payload + mss - 1) / mss; |
| bytes = tcp_overhead * packets + payload; |
| } |
| |
| // Are we past the limit? If so, then abort... |
| // Note: will not overflow since u64 is 936 years even at 5Gbps. |
| // Do not drop here. Offload is just that, whenever we fail to handle |
| // a packet we let the core stack deal with things. |
| // (The core stack needs to handle limits correctly anyway, |
| // since we don't offload all traffic in both directions) |
| if (stat_v->rxBytes + stat_v->txBytes + bytes > *limit_v) PUNT(LIMIT_REACHED); |
| |
| if (!is_ethernet) { |
| // Try to inject an ethernet header, and simply return if we fail. |
| // We do this even if TX interface is RAWIP and thus does not need an ethernet header, |
| // because this is easier and the kernel will strip extraneous ethernet header. |
| if (bpf_skb_change_head(skb, sizeof(struct ethhdr), /*flags*/ 0)) { |
| __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, 1); |
| PUNT(CHANGE_HEAD_FAILED); |
| } |
| |
| // bpf_skb_change_head() invalidates all pointers - reload them |
| data = (void*)(long)skb->data; |
| data_end = (void*)(long)skb->data_end; |
| eth = data; |
| ip6 = (void*)(eth + 1); |
| |
| // I do not believe this can ever happen, but keep the verifier happy... |
| if (data + sizeof(struct ethhdr) + sizeof(*ip6) > data_end) { |
| __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, 1); |
| DROP(TOO_SHORT); |
| } |
| }; |
| |
| // At this point we always have an ethernet header - which will get stripped by the |
| // kernel during transmit through a rawip interface. ie. 'eth' pointer is valid. |
| // Additionally note that 'is_ethernet' and 'l2_header_size' are no longer correct. |
| |
| // CHECKSUM_COMPLETE is a 16-bit one's complement sum, |
| // thus corrections for it need to be done in 16-byte chunks at even offsets. |
| // IPv6 nexthdr is at offset 6, while hop limit is at offset 7 |
| uint8_t old_hl = ip6->hop_limit; |
| --ip6->hop_limit; |
| uint8_t new_hl = ip6->hop_limit; |
| |
| // bpf_csum_update() always succeeds if the skb is CHECKSUM_COMPLETE and returns an error |
| // (-ENOTSUPP) if it isn't. |
| bpf_csum_update(skb, 0xFFFF - ntohs(old_hl) + ntohs(new_hl)); |
| |
| __sync_fetch_and_add(downstream ? &stat_v->rxPackets : &stat_v->txPackets, packets); |
| __sync_fetch_and_add(downstream ? &stat_v->rxBytes : &stat_v->txBytes, bytes); |
| |
| // Overwrite any mac header with the new one |
| // For a rawip tx interface it will simply be a bunch of zeroes and later stripped. |
| *eth = v->macHeader; |
| |
| // Redirect to forwarded interface. |
| // |
| // Note that bpf_redirect() cannot fail unless you pass invalid flags. |
| // The redirect actually happens after the ebpf program has already terminated, |
| // and can fail for example for mtu reasons at that point in time, but there's nothing |
| // we can do about it here. |
| return bpf_redirect(v->oif, 0 /* this is effectively BPF_F_EGRESS */); |
| } |
| |
| DEFINE_BPF_PROG("schedcls/tether_downstream6_ether", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream6_ether) |
| (struct __sk_buff* skb) { |
| return do_forward6(skb, /* is_ethernet */ true, /* downstream */ true); |
| } |
| |
| DEFINE_BPF_PROG("schedcls/tether_upstream6_ether", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream6_ether) |
| (struct __sk_buff* skb) { |
| return do_forward6(skb, /* is_ethernet */ true, /* downstream */ false); |
| } |
| |
| // Note: section names must be unique to prevent programs from appending to each other, |
| // so instead the bpf loader will strip everything past the final $ symbol when actually |
| // pinning the program into the filesystem. |
| // |
| // bpf_skb_change_head() is only present on 4.14+ and 2 trivial kernel patches are needed: |
| // ANDROID: net: bpf: Allow TC programs to call BPF_FUNC_skb_change_head |
| // ANDROID: net: bpf: permit redirect from ingress L3 to egress L2 devices at near max mtu |
| // (the first of those has already been upstreamed) |
| // |
| // 5.4 kernel support was only added to Android Common Kernel in R, |
| // and thus a 5.4 kernel always supports this. |
| // |
| // Hence, these mandatory (must load successfully) implementations for 5.4+ kernels: |
| DEFINE_BPF_PROG_KVER("schedcls/tether_downstream6_rawip$5_4", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream6_rawip_5_4, KVER(5, 4, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward6(skb, /* is_ethernet */ false, /* downstream */ true); |
| } |
| |
| DEFINE_BPF_PROG_KVER("schedcls/tether_upstream6_rawip$5_4", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream6_rawip_5_4, KVER(5, 4, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward6(skb, /* is_ethernet */ false, /* downstream */ false); |
| } |
| |
| // and these identical optional (may fail to load) implementations for [4.14..5.4) patched kernels: |
| DEFINE_OPTIONAL_BPF_PROG_KVER_RANGE("schedcls/tether_downstream6_rawip$4_14", |
| AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream6_rawip_4_14, |
| KVER(4, 14, 0), KVER(5, 4, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward6(skb, /* is_ethernet */ false, /* downstream */ true); |
| } |
| |
| DEFINE_OPTIONAL_BPF_PROG_KVER_RANGE("schedcls/tether_upstream6_rawip$4_14", |
| AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream6_rawip_4_14, |
| KVER(4, 14, 0), KVER(5, 4, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward6(skb, /* is_ethernet */ false, /* downstream */ false); |
| } |
| |
| // and define no-op stubs for [4.9,4.14) and unpatched [4.14,5.4) kernels. |
| // (if the above real 4.14+ program loaded successfully, then bpfloader will have already pinned |
| // it at the same location this one would be pinned at and will thus skip loading this stub) |
| DEFINE_BPF_PROG_KVER_RANGE("schedcls/tether_downstream6_rawip$stub", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream6_rawip_stub, KVER_NONE, KVER(5, 4, 0)) |
| (struct __sk_buff* skb) { |
| return TC_ACT_OK; |
| } |
| |
| DEFINE_BPF_PROG_KVER_RANGE("schedcls/tether_upstream6_rawip$stub", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream6_rawip_stub, KVER_NONE, KVER(5, 4, 0)) |
| (struct __sk_buff* skb) { |
| return TC_ACT_OK; |
| } |
| |
| // ----- IPv4 Support ----- |
| |
| DEFINE_BPF_MAP_GRW(tether_downstream4_map, HASH, Tether4Key, Tether4Value, 64, AID_NETWORK_STACK) |
| |
| DEFINE_BPF_MAP_GRW(tether_upstream4_map, HASH, Tether4Key, Tether4Value, 64, AID_NETWORK_STACK) |
| |
| static inline __always_inline int do_forward4(struct __sk_buff* skb, const bool is_ethernet, |
| const bool downstream) { |
| const int l2_header_size = is_ethernet ? sizeof(struct ethhdr) : 0; |
| void* data = (void*)(long)skb->data; |
| const void* data_end = (void*)(long)skb->data_end; |
| struct ethhdr* eth = is_ethernet ? data : NULL; // used iff is_ethernet |
| struct iphdr* ip = is_ethernet ? (void*)(eth + 1) : data; |
| |
| // Require ethernet dst mac address to be our unicast address. |
| if (is_ethernet && (skb->pkt_type != PACKET_HOST)) return TC_ACT_OK; |
| |
| // Must be meta-ethernet IPv4 frame |
| if (skb->protocol != htons(ETH_P_IP)) return TC_ACT_OK; |
| |
| // Must have (ethernet and) ipv4 header |
| if (data + l2_header_size + sizeof(*ip) > data_end) return TC_ACT_OK; |
| |
| // Ethertype - if present - must be IPv4 |
| if (is_ethernet && (eth->h_proto != htons(ETH_P_IP))) return TC_ACT_OK; |
| |
| // IP version must be 4 |
| if (ip->version != 4) return TC_ACT_OK; |
| |
| // We cannot handle IP options, just standard 20 byte == 5 dword minimal IPv4 header |
| if (ip->ihl != 5) return TC_ACT_OK; |
| |
| // Calculate the IPv4 one's complement checksum of the IPv4 header. |
| __wsum sum4 = 0; |
| for (int i = 0; i < sizeof(*ip) / sizeof(__u16); ++i) { |
| sum4 += ((__u16*)ip)[i]; |
| } |
| // Note that sum4 is guaranteed to be non-zero by virtue of ip4->version == 4 |
| sum4 = (sum4 & 0xFFFF) + (sum4 >> 16); // collapse u32 into range 1 .. 0x1FFFE |
| sum4 = (sum4 & 0xFFFF) + (sum4 >> 16); // collapse any potential carry into u16 |
| // for a correct checksum we should get *a* zero, but sum4 must be positive, ie 0xFFFF |
| if (sum4 != 0xFFFF) return TC_ACT_OK; |
| |
| // Minimum IPv4 total length is the size of the header |
| if (ntohs(ip->tot_len) < sizeof(*ip)) return TC_ACT_OK; |
| |
| // We are incapable of dealing with IPv4 fragments |
| if (ip->frag_off & ~htons(IP_DF)) return TC_ACT_OK; |
| |
| // Cannot decrement during forward if already zero or would be zero, |
| // Let the kernel's stack handle these cases and generate appropriate ICMP errors. |
| if (ip->ttl <= 1) return TC_ACT_OK; |
| |
| const bool is_tcp = (ip->protocol == IPPROTO_TCP); |
| |
| // We do not support anything besides TCP and UDP |
| if (!is_tcp && (ip->protocol != IPPROTO_UDP)) return TC_ACT_OK; |
| |
| struct tcphdr* tcph = is_tcp ? (void*)(ip + 1) : NULL; |
| struct udphdr* udph = is_tcp ? NULL : (void*)(ip + 1); |
| |
| if (is_tcp) { |
| // Make sure we can get at the tcp header |
| if (data + l2_header_size + sizeof(*ip) + sizeof(*tcph) > data_end) return TC_ACT_OK; |
| |
| // If hardware offload is running and programming flows based on conntrack entries, try not |
| // to interfere with it, so do not offload TCP packets with any one of the SYN/FIN/RST flags |
| if (tcph->syn || tcph->fin || tcph->rst) return TC_ACT_OK; |
| } else { // UDP |
| // Make sure we can get at the udp header |
| if (data + l2_header_size + sizeof(*ip) + sizeof(*udph) > data_end) return TC_ACT_OK; |
| } |
| |
| Tether4Key k = { |
| .iif = skb->ifindex, |
| .l4Proto = ip->protocol, |
| .src4.s_addr = ip->saddr, |
| .dst4.s_addr = ip->daddr, |
| .srcPort = is_tcp ? tcph->source : udph->source, |
| .dstPort = is_tcp ? tcph->dest : udph->dest, |
| }; |
| if (is_ethernet) for (int i = 0; i < ETH_ALEN; ++i) k.dstMac[i] = eth->h_dest[i]; |
| |
| Tether4Value* v = downstream ? bpf_tether_downstream4_map_lookup_elem(&k) |
| : bpf_tether_upstream4_map_lookup_elem(&k); |
| |
| // If we don't find any offload information then simply let the core stack handle it... |
| if (!v) return TC_ACT_OK; |
| |
| uint32_t stat_and_limit_k = downstream ? skb->ifindex : v->oif; |
| |
| TetherStatsValue* stat_v = bpf_tether_stats_map_lookup_elem(&stat_and_limit_k); |
| |
| // If we don't have anywhere to put stats, then abort... |
| if (!stat_v) return TC_ACT_OK; |
| |
| uint64_t* limit_v = bpf_tether_limit_map_lookup_elem(&stat_and_limit_k); |
| |
| // If we don't have a limit, then abort... |
| if (!limit_v) return TC_ACT_OK; |
| |
| // Required IPv4 minimum mtu is 68, below that not clear what we should do, abort... |
| if (v->pmtu < 68) return TC_ACT_OK; |
| |
| // Approximate handling of TCP/IPv4 overhead for incoming LRO/GRO packets: default |
| // outbound path mtu of 1500 is not necessarily correct, but worst case we simply |
| // undercount, which is still better then not accounting for this overhead at all. |
| // Note: this really shouldn't be device/path mtu at all, but rather should be |
| // derived from this particular connection's mss (ie. from gro segment size). |
| // This would require a much newer kernel with newer ebpf accessors. |
| // (This is also blindly assuming 12 bytes of tcp timestamp option in tcp header) |
| uint64_t packets = 1; |
| uint64_t bytes = skb->len; |
| if (bytes > v->pmtu) { |
| const int tcp_overhead = sizeof(struct iphdr) + sizeof(struct tcphdr) + 12; |
| const int mss = v->pmtu - tcp_overhead; |
| const uint64_t payload = bytes - tcp_overhead; |
| packets = (payload + mss - 1) / mss; |
| bytes = tcp_overhead * packets + payload; |
| } |
| |
| // Are we past the limit? If so, then abort... |
| // Note: will not overflow since u64 is 936 years even at 5Gbps. |
| // Do not drop here. Offload is just that, whenever we fail to handle |
| // a packet we let the core stack deal with things. |
| // (The core stack needs to handle limits correctly anyway, |
| // since we don't offload all traffic in both directions) |
| if (stat_v->rxBytes + stat_v->txBytes + bytes > *limit_v) return TC_ACT_OK; |
| |
| // TODO: replace Errors with Packets once implemented |
| __sync_fetch_and_add(downstream ? &stat_v->rxErrors : &stat_v->txErrors, packets); |
| __sync_fetch_and_add(downstream ? &stat_v->rxBytes : &stat_v->txBytes, bytes); |
| |
| // TODO: not actually implemented yet |
| return TC_ACT_OK; |
| } |
| |
| // Real implementations for 5.9+ kernels |
| |
| DEFINE_BPF_PROG_KVER("schedcls/tether_downstream4_ether$5_9", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream4_ether_5_9, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward4(skb, /* is_ethernet */ true, /* downstream */ true); |
| } |
| |
| DEFINE_BPF_PROG_KVER("schedcls/tether_downstream4_rawip$5_9", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream4_rawip_5_9, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward4(skb, /* is_ethernet */ false, /* downstream */ true); |
| } |
| |
| DEFINE_BPF_PROG_KVER("schedcls/tether_upstream4_ether$5_9", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream4_ether_5_9, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward4(skb, /* is_ethernet */ true, /* downstream */ false); |
| } |
| |
| DEFINE_BPF_PROG_KVER("schedcls/tether_upstream4_rawip$5_9", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream4_rawip_5_9, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return do_forward4(skb, /* is_ethernet */ false, /* downstream */ false); |
| } |
| |
| // Placeholder implementations for older pre-5.9 kernels |
| |
| DEFINE_BPF_PROG_KVER_RANGE("schedcls/tether_downstream4_ether$stub", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream4_ether_stub, KVER_NONE, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return TC_ACT_OK; |
| } |
| |
| DEFINE_BPF_PROG_KVER_RANGE("schedcls/tether_downstream4_rawip$stub", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_downstream4_rawip_stub, KVER_NONE, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return TC_ACT_OK; |
| } |
| |
| DEFINE_BPF_PROG_KVER_RANGE("schedcls/tether_upstream4_ether$stub", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream4_ether_stub, KVER_NONE, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return TC_ACT_OK; |
| } |
| |
| DEFINE_BPF_PROG_KVER_RANGE("schedcls/tether_upstream4_rawip$stub", AID_ROOT, AID_NETWORK_STACK, |
| sched_cls_tether_upstream4_rawip_stub, KVER_NONE, KVER(5, 9, 0)) |
| (struct __sk_buff* skb) { |
| return TC_ACT_OK; |
| } |
| |
| // ----- XDP Support ----- |
| |
| #define DEFINE_XDP_PROG(str, func) \ |
| DEFINE_BPF_PROG_KVER(str, AID_ROOT, AID_NETWORK_STACK, func, KVER(5, 9, 0))(struct xdp_md *ctx) |
| |
| DEFINE_XDP_PROG("xdp/tether_downstream_ether", |
| xdp_tether_downstream_ether) { |
| return XDP_PASS; |
| } |
| |
| DEFINE_XDP_PROG("xdp/tether_downstream_rawip", |
| xdp_tether_downstream_rawip) { |
| return XDP_PASS; |
| } |
| |
| DEFINE_XDP_PROG("xdp/tether_upstream_ether", |
| xdp_tether_upstream_ether) { |
| return XDP_PASS; |
| } |
| |
| DEFINE_XDP_PROG("xdp/tether_upstream_rawip", |
| xdp_tether_upstream_rawip) { |
| return XDP_PASS; |
| } |
| |
| LICENSE("Apache 2.0"); |
| CRITICAL("netd"); |