blob: f83f8c6d9ed4b86dfe503ac3b655e23536f43ac3 [file] [log] [blame]
Alex Deymobae90be2017-03-17 00:30:28 -07001# Copyright 2016 The Android Open Source Project
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7# http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14
15[MASTER]
16
17# Specify a configuration file.
18#rcfile=
19
20# Python code to execute, usually for sys.path manipulation such as
21# pygtk.require().
22#init-hook=
23
24# Profiled execution.
25profile=no
26
27# Add files or directories to the blacklist. They should be base names, not
28# paths.
29ignore=CVS,.svn,.git
30
31# Pickle collected data for later comparisons.
32persistent=yes
33
34# List of plugins (as comma separated values of python modules names) to load,
35# usually to register additional checkers.
36load-plugins=
37
38# Use multiple processes to speed up Pylint.
39jobs=1
40
41# Allow loading of arbitrary C extensions. Extensions are imported into the
42# active Python interpreter and may run arbitrary code.
43unsafe-load-any-extension=no
44
45# A comma-separated list of package or module names from where C extensions may
46# be loaded. Extensions are loading into the active Python interpreter and may
47# run arbitrary code
48extension-pkg-whitelist=
49
50# Allow optimization of some AST trees. This will activate a peephole AST
51# optimizer, which will apply various small optimizations. For instance, it can
52# be used to obtain the result of joining multiple strings with the addition
53# operator. Joining a lot of strings can lead to a maximum recursion error in
54# Pylint and this flag can prevent that. It has one side effect, the resulting
55# AST will be different than the one from reality.
56optimize-ast=no
57
58
59[MESSAGES CONTROL]
60
61# List of checkers and warnings to enable.
62enable=old-raise-syntax
63
64# Only show warnings with the listed confidence levels. Leave empty to show
65# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
66confidence=
67
68# Enable the message, report, category or checker with the given id(s). You can
69# either give multiple identifier separated by comma (,) or put this option
70# multiple time. See also the "--disable" option for examples.
71#enable=
72
73# Disable the message, report, category or checker with the given id(s). You
74# can either give multiple identifiers separated by comma (,) or put this
75# option multiple times (only on the command line, not in the configuration
76# file where it should appear only once).You can also use "--disable=all" to
77# disable everything first and then reenable specific checks. For example, if
78# you want to run only the similarities checker, you can use "--disable=all
79# --enable=similarities". If you want to run only the classes checker, but have
80# no Warning level messages displayed, use"--disable=all --enable=classes
81# --disable=W"
82# We leave many of the style warnings to judgement/peer review.
83disable=
84 fixme,
85 locally-disabled,
86 locally-enabled,
87 no-self-use,
88 star-args,
89 too-few-public-methods,
90 too-many-arguments,
91 too-many-branches,
92 too-many-instance-attributes,
93 too-many-lines,
94 too-many-locals,
95 too-many-public-methods,
96 too-many-return-statements,
97 too-many-statements,
98
99
100[REPORTS]
101
102# Set the output format. Available formats are text, parseable, colorized, msvs
103# (visual studio) and html. You can also give a reporter class, eg
104# mypackage.mymodule.MyReporterClass.
105output-format=text
106
107# Put messages in a separate file for each module / package specified on the
108# command line instead of printing them on stdout. Reports (if any) will be
109# written in a file name "pylint_global.[txt|html]".
110files-output=no
111
112# Tells whether to display a full report or only the messages
113reports=no
114
115# Python expression which should return a note less than 10 (10 is the highest
116# note). You have access to the variables errors warning, statement which
117# respectively contain the number of errors / warnings messages and the total
118# number of statements analyzed. This is used by the global evaluation report
119# (RP0004).
120#evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
121
122# Template used to display messages. This is a python new-style format string
123# used to format the message information. See doc for all details
124#msg-template=
125
126
127[SIMILARITIES]
128
129# Minimum lines number of a similarity.
130min-similarity-lines=20
131
132# Ignore comments when computing similarities.
133ignore-comments=yes
134
135# Ignore docstrings when computing similarities.
136ignore-docstrings=yes
137
138# Ignore imports when computing similarities.
139ignore-imports=no
140
141
142[TYPECHECK]
143
144# Tells whether missing members accessed in mixin class should be ignored. A
145# mixin class is detected if its name ends with "mixin" (case insensitive).
146ignore-mixin-members=yes
147
148# List of module names for which member attributes should not be checked
149# (useful for modules/projects where namespaces are manipulated during runtime
150# and thus existing member attributes cannot be deduced by static analysis. It
151# supports qualified module names, as well as Unix pattern matching.
152ignored-modules=
153
154# List of classes names for which member attributes should not be checked
155# (useful for classes with attributes dynamically set). This supports can work
156# with qualified names.
157ignored-classes=hashlib,numpy
158
159# List of members which are set dynamically and missed by pylint inference
160# system, and so shouldn't trigger E1101 when accessed. Python regular
161# expressions are accepted.
162generated-members=
163
164# List of decorators that create context managers from functions, such as
165# contextlib.contextmanager.
166contextmanager-decorators=contextlib.contextmanager,contextlib2.contextmanager
167
168
169[SPELLING]
170
171# Spelling dictionary name. Available dictionaries: none. To make it working
172# install python-enchant package.
173spelling-dict=
174
175# List of comma separated words that should not be checked.
176spelling-ignore-words=
177
178# A path to a file that contains private dictionary; one word per line.
179spelling-private-dict-file=
180
181# Tells whether to store unknown words to indicated private dictionary in
182# --spelling-private-dict-file option instead of raising a message.
183spelling-store-unknown-words=no
184
185
186[LOGGING]
187
188# Logging modules to check that the string format arguments are in logging
189# function parameter format
190logging-modules=logging
191
192
193[VARIABLES]
194
195# Tells whether we should check for unused import in __init__ files.
196init-import=no
197
198# A regular expression matching names used for dummy variables (i.e. not used).
199dummy-variables-rgx=^\*{0,2}(_$|unused_|dummy_)
200
201# List of additional names supposed to be defined in builtins. Remember that
202# you should avoid to define new builtins when possible.
203additional-builtins=
204
205# List of strings which can identify a callback function by name. A callback
206# name must start or end with one of those strings.
207callbacks=cb_,_cb
208
209
210[FORMAT]
211
212# Maximum number of characters on a single line.
213max-line-length=80
214
215# Allow the body of an if to be on the same line as the test if there is no
216# else.
217single-line-if-stmt=no
218
219# Regexp for a line that is allowed to be longer than the limit.
220# This "ignore" regex is today composed of 4 independent parts:
221# (1) Long import lines
222# (2) URLs in comments or pydocs. Detecting URLs by regex is a hard problem and
223# no amount of tweaking will make a perfect regex AFAICT. This one is a good
224# compromise.
225# (3) Constant string literals at the start of files don't need to be broken
226# across lines. Allowing long paths, streamz and urls to be on a single
227# line. Also requires that the string not be a triplequoted string.
228ignore-long-lines=(?x)
229 (^\s*(import|from)\s
230 |^\s*(\#\ )?<?(https?|ftp):\/\/[^\s\/$.?#].[^\s]*>?$
231 |^[a-zA-Z_][a-zA-Z0-9_]*\s*=\s*("[^"]\S+"|'[^']\S+')
232 )
233
234# Maximum number of lines in a module
235max-module-lines=99999
236
237# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
238# tab).
239indent-string=' '
240
241# Number of spaces of indent required inside a hanging or continued line.
242indent-after-paren=4
243
244# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
245expected-line-ending-format=LF
246
247# Make sure : in dicts and trailing commas are checked for whitespace.
248no-space-check=
249
250
251[MISCELLANEOUS]
252
253# List of note tags to take in consideration, separated by a comma.
254notes=FIXME,XXX,TODO
255
256
257[BASIC]
258
259# Required attributes for module, separated by a comma
260required-attributes=
261
262# List of builtins function names that should not be used, separated by a comma
263bad-functions=map,filter,input,apply,reduce
264
265# Good variable names which should always be accepted, separated by a comma
266good-names=i,j,k,ex,x,_
267
268# Bad variable names which should always be refused, separated by a comma
269bad-names=foo,bar,baz,toto,tutu,tata
270
271# Colon-delimited sets of names that determine each other's naming style when
272# the name regexes allow several styles.
273name-group=
274
275# Include a hint for the correct naming format with invalid-name
276include-naming-hint=no
277
278# Regular expression which should only match correct function names.
279# 'camel_case' and 'snake_case' group names are used for consistency of naming
280# styles across functions and methods.
281function-rgx=^(?:(?P<camel_case>_?[A-Z][a-zA-Z0-9]*)|(?P<snake_case>_?[a-z][a-z0-9_]*))$
282
283# Naming hint for function names
284function-name-hint=[a-z_][a-z0-9_]{2,30}$
285
286# Regular expression which should only match correct variable names
287variable-rgx=^[a-z][a-z0-9_]*$
288
289# Naming hint for variable names
290variable-name-hint=[a-z_][a-z0-9_]{2,30}$
291
292# Regular expression which should only match correct module level names
293const-rgx=^(_?[A-Z][A-Z0-9_]*|__[a-z0-9_]+__|_?[a-z][a-z0-9_]*)$
294
295# Naming hint for constant names
296const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
297
298# Regular expression which should only match correct instance attribute names
299attr-rgx=^_{0,2}[a-z][a-z0-9_]*$
300
301# Naming hint for attribute names
302attr-name-hint=[a-z_][a-z0-9_]{2,30}$
303
304# Regular expression which should only match correct argument names
305argument-rgx=^[a-z][a-z0-9_]*$
306
307# Naming hint for argument names
308argument-name-hint=[a-z_][a-z0-9_]{2,30}$
309
310# Regular expression which should only match correct class attribute
311class-attribute-rgx=^(_?[A-Z][A-Z0-9_]*|__[a-z0-9_]+__|_?[a-z][a-z0-9_]*)$
312
313# Naming hint for class attribute names
314class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
315
316# Regular expression which should only match correct list comprehension /
317# generator expression variable names
318inlinevar-rgx=^[a-z][a-z0-9_]*$
319
320# Naming hint for inline iteration names
321inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
322
323# Regular expression which should only match correct class names
324class-rgx=^_?[A-Z][a-zA-Z0-9]*$
325
326# Naming hint for class names
327class-name-hint=[A-Z_][a-zA-Z0-9]+$
328
329# Regular expression which should only match correct module names. The
330# leading underscore is sanctioned for private modules by Google's style
331# guide.
332module-rgx=^(_?[a-z][a-z0-9_]*)|__init__$
333
334# Naming hint for module names
335module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
336
337# Regular expression which should only match correct method names.
338# 'camel_case' and 'snake_case' group names are used for consistency of naming
339# styles across functions and methods. 'exempt' indicates a name which is
340# consistent with all naming styles.
341method-rgx=^(?:(?P<exempt>__[a-z0-9_]+__|next)|(?P<camel_case>_{0,2}[A-Z][a-zA-Z0-9]*)|(?P<snake_case>_{0,2}[a-z][a-z0-9_]*))$
342
343# Naming hint for method names
344method-name-hint=[a-z_][a-z0-9_]{2,30}$
345
346# Regular expression which should only match function or class names that do
347# not require a docstring.
348no-docstring-rgx=(__.*__|main)
349
350# Minimum line length for functions/classes that require docstrings, shorter
351# ones are exempt.
352docstring-min-length=10
353
354# List of decorators that define properties, such as abc.abstractproperty.
355property-classes=abc.abstractproperty
356
357
358[ELIF]
359
360# Maximum number of nested blocks for function / method body
361max-nested-blocks=5
362
363
364[DESIGN]
365
366# Maximum number of arguments for function / method
367max-args=5
368
369# Argument names that match this expression will be ignored. Default to name
370# with leading underscore
371ignored-argument-names=_.*
372
373# Maximum number of locals for function / method body
374max-locals=15
375
376# Maximum number of return / yield for function / method body
377max-returns=6
378
379# Maximum number of branch for function / method body
380max-branches=12
381
382# Maximum number of statements in function / method body
383max-statements=50
384
385# Maximum number of parents for a class (see R0901).
386max-parents=10
387
388# Maximum number of attributes for a class (see R0902).
389max-attributes=7
390
391# Minimum number of public methods for a class (see R0903).
392min-public-methods=2
393
394# Maximum number of public methods for a class (see R0904).
395max-public-methods=20
396
397# Maximum number of boolean expressions in a if statement
398max-bool-expr=5
399
400
401[CLASSES]
402
403# List of method names used to declare (i.e. assign) instance attributes.
404defining-attr-methods=__init__,__new__,setUp
405
406# List of valid names for the first argument in a class method.
407valid-classmethod-first-arg=cls
408
409# List of valid names for the first argument in a metaclass class method.
410valid-metaclass-classmethod-first-arg=mcs
411
412# List of member names, which should be excluded from the protected access
413# warning.
414exclude-protected=_asdict,_fields,_replace,_source,_make
415
416
417[IMPORTS]
418
419# Deprecated modules which should not be used, separated by a comma
420deprecated-modules=regsub,TERMIOS,Bastion,rexec,optparse
421
422# Create a graph of every (i.e. internal and external) dependencies in the
423# given file (report RP0402 must not be disabled)
424import-graph=
425
426# Create a graph of external dependencies in the given file (report RP0402 must
427# not be disabled)
428ext-import-graph=
429
430# Create a graph of internal dependencies in the given file (report RP0402 must
431# not be disabled)
432int-import-graph=
433
434
435[EXCEPTIONS]
436
437# Exceptions that will emit a warning when being caught. Defaults to
438# "Exception"
439overgeneral-exceptions=StandardError,Exception,BaseException